Designed to be used together to improve the performance of electrical connections, cleaners remove oxidation and corrosion on connections while sealants coat them to prevent oxidation and corrosion.

Cleaners provide long-lasting protection for all metal surfaces. Sealants for metal surfaces protect electrical contacts and connections in high humidity, corrosive, and salty environments. Sealants for gold surfaces improve conductivity and provide lasting protection.

Kits come with cleaner, sealant for metal surfaces, sealant for gold surfaces, and grease. Grease provides lubrication while also removing corrosion and oxidation. Kits also include cloths, brushes, and swabs for application.

Keep electric motors and generators working efficiently by removing dirt, grease/oil, gum, and wax. These cleaners are NSF registered K2 for use in food-processing environments.

Spray these abrasion- and wear-resistant coatings on motor winding wire, transformers, and other metal electrical parts to protect them from oils, chemicals, and moisture. They are solvent based, so they dry quickly. Choose a varnish with a dielectric strength that’s greater than the voltage of the electrical equipment it protects.

Clear varnish leaves a transparent film so components can be inspected. Red and green varnish stand out for identification when used to coat wire.

Apply to electrical connections such as switches and lugs to prevent corrosion, enhance conductivity, and suppress arcing. These inhibitors protect and lubricate the connection while sealing out liquids and gases.

The compound is easy to apply with the included brush.

Chill individual electronic components on a circuit board to troubleshoot one circuit at a time.

Sprays with hydrofluoroolefin gas propellant are less harmful to the environment than sprays with hydrofluorocarbon gas propellant.

Wipe oils, dust, and other particles off sensitive optical devices such as lenses, mirrors, solar cells, laser hardware, and scientific instruments. Kits come with 3 oz. of cleaning fluid and 100 lint-free wipes. Fluid is solvent based, so it dries quickly and won’t leave a residue. Wipes eliminate static cling to help prevent dust and dirt buildup after cleaning.

Stop corrosion caused by battery acid fumes leaking at the posts of battery terminals.

Form a protective barrier that makes surfaces impregnable to corrosion-causing acid fumes.

Remove dirt, magnetic oxides, and other contaminants from credit card readers with these one-time-use cards.

Clean dirt, grease, oil, tar, and wax from fiber-optic cables before splicing them together. After wiping them on, these removers evaporate quickly and don’t leave residue, so there’s no need to rinse the cables off and their optical clarity won’t change. If you’re in a rush, wipe them dry with a lint-free cloth.

Remove gels, blocking and filling compounds, dirt, grease, oil, tar, and wax often found in or on outdoor telecommunications cables before splicing them together to make a reliable connection. These solvent-based removers are safe to use on cable insulation and components, metals, and most plastics. All rinse clean with water.

Wipes come ready to use. Simply wipe them on your cables.

Use a brush or saturate a cloth to apply liquids to your cables.

These solvent-based degreasers contain Vertrel™ to remove long-lasting lubricants, such as DuPont/Chemours Krytox, from parts and fittings. They are nonflammable and less hazardous than other solvents that remove lubricants, such as nPB, PERC, and TCE. They also evaporate quickly, allowing parts to be used shortly after cleaning.

Clean dust, dirt, and flux off work surfaces while also dissipating static.

Wipes are lint free and don’t contain flammable or harsh chemicals that are often found in other cleaning wipes, such as isopropyl alcohol.

Wipe dust, dirt, and fingerprints off laptops, keyboards, televisions, mobile devices, and other electronic equipment. These saturated wipes won’t streak or leave behind lint. They are also free of flammable or harsh chemicals, such as isopropyl alcohol and ammonia.

Often used to clean lubricants off compressed gas equipment and fittings, these solvent-based degreasers have a contaminant concentration below 1 ppm to ensure no residue or particles are left behind that can hinder the operation of valves, sensors, and controls. They contain Vertrel™ to remove long-lasting lubricants, such as DuPont/Chemours Krytox. They are nonflammable and less hazardous than other solvents that remove lubricants, such as nPB, PERC, and TCE. Use these degreasers as the primary cleaner or as a final rinse to ensure parts are completely clean. They evaporate quickly, allowing parts to be used shortly after cleaning.

Clean fingerprints, uncured epoxy residue, flux, and light oils off printed circuit boards and electronic connectors. These saturated wipes won’t leave behind residue.

Eliminate static buildup to protect electronic equipment from damage caused by static discharge. These neutralizers also help prevent dust and dirt buildup on equipment.

Neutralizers that are NSF registered P1 can be used in food-processing environments.

Remove oil- or solvent-based residue from metal, plastic, wood, carpet, upholstery, and painted surfaces.

Gels cling to vertical surfaces to remove residue more effectively than liquids.

Often used to clean sensitive parts and equipment in precision applications, such as electronics and medical device manufacturing, these cleaners rinse away without leaving a residue. They can be used for both manual and ultrasonic cleaning.

Low-foaming cleaners can be used in spray washers and laboratory dishwashers.

Cleaners with citric acid are phosphate free, making them safe for use on aluminum, brass, bronze, and copper. They also remove rust.

Remove oil-based residue from hard surfaces, painted surfaces, vinyl, carpet, and fabric.