About On/Off Valves
More
Easy-Clean Threaded Diverting Valves for Chemicals
- Valve Type: Ball
- For Use With: Air, Ammonia, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Isopropyl Alcohol, Kerosene, Natural Gas, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite, Sulfuric Acid, Toluene, Water
- Ball Material: Polypropylene Plastic
- Seal Material: Fluoroelastomer Rubber
There’s no need to unbolt these valves for cleaning—remove the handle and slide the valve apart for inline access to internal components. Also known as elliptical valves, they have a fluoroelastomer seal and a polypropylene body for diverting flow in chemical-processing applications. All are full port, so they do not restrict flow.
Valves with a side-port inlet direct flow from the right port to the center or left port. They cannot shut off flow.
Valves with any port inlet can use any port as an inlet or outlet. Turn the handle to direct flow from the inlet port to one outlet port at full capacity, direct flow to both outlet ports simultaneously at reduced capacity, or shut off flow completely.
For technical drawings and 3-D models, click on a part number.



Pipe Size | Flow Pattern | Max. Pressure | Temp. Range, °F | Vacuum Rating, in. of Hg | End-to-End Lg. | Each | |
Black Polypropylene Plastic Body | |||||||
---|---|---|---|---|---|---|---|
NPT Female × NPT Female × NPT Female | |||||||
1/4 | L-Pattern | 150 psi @ 70° F | 15° to 180° | 29 | 2 1/4" | 000000000 | 000000 |
3/8 | L-Pattern | 150 psi @ 70° F | 15° to 180° | 29 | 3" | 000000000 | 00000 |
1/2 | L-Pattern | 150 psi @ 70° F | 15° to 180° | 29 | 3" | 000000000 | 00000 |
3/4 | L-Pattern | 150 psi @ 70° F | 15° to 180° | 29 | 3 1/2" | 000000000 | 00000 |



Pipe Size | Flow Pattern | Max. Pressure | Temp. Range, °F | Vacuum Rating, in. of Hg | End-to-End Lg. | Each | |
Black Polypropylene Plastic Body | |||||||
---|---|---|---|---|---|---|---|
NPT Female × NPT Female × NPT Female | |||||||
1/4 | T-Pattern | 150 psi @ 70° F | 15° to 180° | 29 | 2 1/4" | 00000000 | 000000 |
3/8 | T-Pattern | 150 psi @ 70° F | 15° to 180° | 29 | 3" | 00000000 | 00000 |
1/2 | T-Pattern | 150 psi @ 70° F | 15° to 180° | 29 | 3" | 00000000 | 00000 |
3/4 | T-Pattern | 150 psi @ 70° F | 15° to 180° | 29 | 3 1/2" | 00000000 | 00000 |
Easy-Clean Threaded On/Off Valves for Chemicals


- Valve Type: Ball
- For Use With: Air, Ammonia, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Isopropyl Alcohol, Kerosene, Natural Gas, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions
- Ball Material: Polypropylene Plastic
- Seal Material: Fluoroelastomer Rubber
There’s no need to unbolt these valves for cleaning—remove the valve handle and slide the valve apart for inline access to internal components. Also known as elliptical valves, they have a fluoroelastomer seal and a polypropylene body to withstand aggressive and corrosive solutions in chemical-processing applications. All are full port, so they do not restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | End-to-End Lg. | Each | |
Black Polypropylene Plastic Body | |||||||
---|---|---|---|---|---|---|---|
NPT Female × NPT Female | |||||||
1/4 | 1.7 | 150 psi @ 70° F | 15° to 180° | 29 | 2 1/4" | 00000000 | 000000 |
3/8 | 4.2 | 150 psi @ 70° F | 15° to 180° | 29 | 3" | 00000000 | 00000 |
1/2 | 5.7 | 150 psi @ 70° F | 15° to 180° | 29 | 3" | 00000000 | 00000 |
3/4 | 8.2 | 150 psi @ 70° F | 15° to 180° | 29 | 3 1/2" | 00000000 | 00000 |