Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

For protection against dust, dirt, and washdowns, these locks are IP65 rated.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

These locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

Meet U.S. postal service guidelines for mailbox locks.

Designed for use in 1/2" dia. through holes.

A stainless steel shutter blocks rain, snow, and dirt from entering the cylinder where they can cause internal damage.

Designed for use in 1/2" dia. through holes.

Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Designed for use in 1/2" dia. through holes.

To prevent internal damage, these locks have a stainless steel shutter that blocks rain, snow, and dirt from entering the cylinder.

Without a keyway, you don't have to worry about these magnetic locks being picked or memorizing combinations. They are water-tight, so they resist snow, dirt, and other contaminants.

These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.

These locks open with their own unique key as well as a master key.

Designed for food-processing and hygienic applications, these corrosion-resistant cam locks are made of FDA listed materials.

A red indicator on the lock face is visible when unlocked and hidden when locked.

These locks require a hex key to open.

Open multiple locks with the same key.

The mounting screws on these locks are concealed to prevent tampering.

Open each of these locks with a different key.

Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Choose these locks if you need to open several with the same key.

In addition to an IP65 rating for low-pressure washdown environments, these locks have a squeeze-release handle to prevent accidental opening when unlocked.

Open these locks with both a master key and their own unique key.

Also known as compression cam locks, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.

With a molded inset grip, the handle remains recessed to stay out of the way.

Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

Use these latches in a 3/4" dia. through hole, which is the most common through-hole size.

These latches are IP65 rated for protection against dust, dirt, and washdowns.

Use these latches with three-point locking systems, such as those on filing cabinet doors.

Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Designed for food-processing and hygienic applications, these corrosion-resistant latches are FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food.

Also known as adjustable compression cam latches, these adjust to compensate for door or drawer misalignment.

Raise the handle and it swings smoothly for easy latching and unlatching.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.

Fold the ring handle into the recess to stay out of the way when not in use.

With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets.

These padlockable latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

Similar to locks on a hotel safe, each user sets a new combination.

Also known as bullet catches, these latches have a spring-loaded ball that grabs and holds the strike plate to keep doors shut.

Each latch has top and bottom spring-loaded balls that can grab the strike plate from different directions.

Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold.

A catch grabs and holds the strike plate to keep doors shut.

These latches snap together to secure doors. They have a return spring to snap tight with a push and release with a pull.

Magnetic force holds doors closed.

To keep your environments free of contaminants, the magnet is encapsulated so it won't release particles when it meets the strike plate.

To prevent doors from slamming, these latches are hydraulic.

Close and open these magnetic latches with a push—there's no need for a handle.

Also known as paddle latches, these are often used on electrical panels, cabinets, and lockers.

For use on spray booths and drying ovens, these latches automatically open when the internal pressure of the enclosure reaches a set level.

Attach these padlockable latches vertically to the side edge of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted behind it on the frame.

Operate these padlockable latches from either side of the door—there is a handle on both sides.

Attach these locks vertically to the side edge of doors on refrigerators and industrial enclosures with the strike plate mounted behind them on the frame.

Also known as paddle locks, these are often used on electrical panels, cabinets, and lockers.

Choose these cylinders if you need cylinders that each open with a different key.

Choose these locks if you need locks that each open with a different key.

Choose these locking bars if you need several bars that open with the same key.

For security, choose a combination from over 2,000 possible five-number combinations.

These locking bars have hinges and swing out of the way for easy access to cabinet drawers.

Choose these locks if you need several locks that open with the same key.

A highly durable construction with hardened steel pivot pins and bushings provides a long service life.

Push the lever to lock the handle and prevent accidental opening.

Add a knob or handle to the threaded shank.

A quarter turn of the handle locks these plungers in the retracted position. The T-handle is easy to grip.

A T-handle makes these spring plungers easy to grip.