T-Slotted Framing Caps, Covers, and Seals
Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.
Antislip covers add traction to a rail. They can be cut to size with scissors. Push them into a T-slot.
For Rail Ht. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | For T-Slot Wd. | Projection | Material | Color | Each | |
6 ft. Lg. | ||||||||
| 1" | 2" | 3" | 0.256" | 1/8" | Plastic/Rubber Blend | Black | 000000000 | 000000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 0.32", 8mm | 5/32" | Plastic/Rubber Blend | Black | 000000000 | 00000 |
| 25mm | 50mm | __ | 6.5mm | 5/32" | Plastic/Rubber Blend | Black | 00000000 | 00000 |
| 45mm | 90mm | __ | 10mm | 3/16" | EPDM Rubber | Black | 0000000 | 00000 |
12 ft. Lg. | ||||||||
| 1" | 2" | 3" | 0.256" | 1/8" | Plastic/Rubber Blend | Black | 000000000 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 0.32", 8mm | 5/32" | Plastic/Rubber Blend | Black | 000000000 | 00000 |
| 25mm | 50mm | __ | 6.5mm | 5/32" | Plastic/Rubber Blend | Black | 00000000 | 00000 |
| 45mm | 90mm | __ | 10mm | 3/16" | EPDM Rubber | Black | 00000000 | 00000 |
Seals cover door gaps and rail end connections to keep out air and dust.
Bulb seals compress better than solid seals, but water can leak from the top or bottom when your door is ajar.
Inline wiper seals deflect water and dust when in motion.
Flexible seals can be cut to size with scissors. Press them into a T-slot.
Rigid seals quickly snap into a T-slot for a secure hold.
For Rail Ht. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | For T-Slot Wd. | Lg., ft. | Wd. | Projection | Bulb Ht. | Offset | Required Door Gap | Flexibility | Color | Each | |
Inline | |||||||||||||
EPDM Rubber | |||||||||||||
| 1" | 2" | 3" | 0.256" | 6 | 3/8" | 11/32" | 1/4" | __ | 5/32" | Rigid | Black | 0000000 | 000000 |
| 1" | 2" | 3" | 0.256" | 6 | 1/2" | 1/4" | 3/16" | __ | 1/8" | Rigid | Black | 00000000 | 00000 |
| 1" | 2" | 3" | 0.256" | 6 | 3/4" | 9/16" | 3/8" | __ | 1/4" | Rigid | Black | 00000000 | 00000 |
| 1" | 2" | 3" | 0.256" | 6 | 3/4" | 5/8" | 9/16" | __ | 3/8" | Rigid | Black | 00000000 | 00000 |
| 1" | 2" | 3" | 0.256" | 6 | 15/16" | 27/32" | 3/4" | __ | 1/2" | Rigid | Black | 00000000 | 00000 |
| 1 | 3", 80mm | 4 | 0.32", 8mm | 6 | 3/8" | 11/32" | 1/4" | __ | 5/32" | Rigid | Black | 00000000 | 00000 |
| 1 | 3", 80mm | 4 | 0.32", 8mm | 6 | 1/2" | 1/4" | 3/16" | __ | 1/8" | Rigid | Black | 00000000 | 00000 |
| 1 | 3", 80mm | 4 | 0.32", 8mm | 6 | 3/4" | 5/16" | 5/16" | __ | 1/4" | Flexible | Black | 000000000 | 00000 |
| 1 | 3", 80mm | 4 | 0.32", 8mm | 6 | 3/4" | 9/16" | 3/8" | __ | 1/4" | Rigid | Black | 00000000 | 00000 |
| 1 | 3", 80mm | 4 | 0.32", 8mm | 6 | 3/4" | 5/8" | 9/16" | __ | 3/8" | Rigid | Black | 00000000 | 00000 |
| 1 | 3", 80mm | 4 | 0.32", 8mm | 6 | 15/16" | 27/32" | 3/4" | __ | 1/2" | Rigid | Black | 00000000 | 00000 |
Inline Wiper | |||||||||||||
EPDM Rubber | |||||||||||||
| 1" | 2" | 3" | 0.256" | 6 | 5/8" | 7/16" | 3/8" | __ | __ | Rigid | Black | 00000000 | 00000 |
| 1 | 3", 80mm | 4 | 0.32", 8mm | 6 | 5/8" | 7/16" | 3/8" | __ | __ | Rigid | Black | 00000000 | 00000 |
Offset | |||||||||||||
PVC Plastic/TPE Rubber | |||||||||||||
| 1 | 3", 60mm, 80mm | 4 | 0.32", 8mm | 6 1/2 | 1 3/16" | 1/2" | 1/4" | 7/8" | __ | Rigid | Gray | 00000000 | 00000 |
| 45mm | 90mm | __ | 10mm | 6 1/2 | 1 1/2" | 15/32" | 1/4" | 1 1/8" | __ | Rigid | Gray | 00000000 | 00000 |
Seals cover door gaps and rail end connections to keep out air and dust.
Solid seals don’t hold water since they have no openings. However, they don’t compress as well as bulb and brush seals, so they require a precise door gap. They quickly snap into a T-slot for a secure hold.
For Rail Ht. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | For T-Slot Wd. | Lg., ft. | Wd. | Projection | Material | Color | Each | |
| 1" | 2" | 3" | 0.256" | 6 | 1/2" | 3/8" | EPDM Rubber | Black | 0000000 | 000000 |
| 1" | 2" | 3" | 0.256" | 6 | 5/8" | 9/16" | EPDM Rubber | Black | 00000000 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 0.32", 8mm | 6 | 1/2" | 3/8" | EPDM Rubber | Black | 00000000 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 0.32", 8mm | 6 | 5/8" | 9/16" | EPDM Rubber | Black | 00000000 | 00000 |
Seals cover door gaps and rail end connections to keep out air and dust.
Wiper seals deflect water and dust when in motion. They can be cut to size with scissors.
For Rail Ht. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | For T-Slot Wd. | Lg., ft. | Wd. | Projection | Material | Color | Each | |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 0.32", 8mm | 6 1/2 | 7/16" | 7/8" | Nitrile Rubber | Black | 000000000 | 000000 |
Panel gaskets seal out liquid and dust while holding panels securely in place. Once installed, the gasket isn’t noticeable. However, the panel and gasket need to be installed before the structure is fully assembled. Press them into a T-slot.
For Rail Ht. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | For T-Slot Wd. | For Panel Thick. | Lg., ft. | Material | Temperature Range, °F | Hardness | Hardness Rating | Color | Each | |
| 1", 25mm | 2", 50mm | 3", 75mm | 0.256", 6mm | 5 mm | 6 | TPE Rubber | -20° to 275° | Durometer 65A | Medium Hard | Black | 0000000 | 00000 |
| 1", 25mm | 2", 50mm | 3", 75mm | 0.256", 6mm | 5 mm | 6 | Silicone Rubber | -95° to 435° | Durometer 65A | Medium Hard | Gray | 0000000 | 00000 |
| 1 | 3", 60mm, 80mm | 4 | 0.32", 8mm | 6 mm | 6 1/2 | TPE Rubber | -20° to 275° | Durometer 65A | Medium Hard | Black | 00000000 | 00000 |
| 1 | 3", 80mm | 4 | 0.32", 8mm | 6 mm | 6 1/2 | Silicone Rubber | -95° to 435° | Durometer 65A | Medium Hard | Gray | 0000000 | 00000 |
| 20mm | 40mm | __ | 5mm | 3 mm | 6 1/2 | TPE Rubber | -20° to 275° | Durometer 65A | Medium Hard | Black | 0000000 | 00000 |
| 45mm | 90mm | __ | 10mm | 5 mm | 6 1/2 | TPE Rubber | -20° to 275° | Durometer 65A | Medium Hard | Black | 0000000 | 00000 |
| 45mm | 90mm | __ | 10mm | 6 mm | 6 1/2 | TPE Rubber | -20° to 275° | Durometer 65A | Medium Hard | Black | 00000000 | 00000 |
Panel gaskets seal out liquid and dust while holding panels securely in place. Once installed, the gasket isn’t noticeable. However, the panel and gasket need to be installed before the structure is fully assembled. Press them into a T-slot.
For Rail Ht. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | For T-Slot Wd. | For Panel Thick. | Lg., ft. | Material | Temperature Range, °F | Hardness | Hardness Rating | Color | Each | |
| 40 mm | 80 mm | 120 mm | 8 mm | 6 mm | 6 1/2 | TPE Rubber | 0° to 155° | Durometer 60A | Medium Hard | Gray | 0000000 | 00000 |
| 40 mm | 80 mm | 120 mm | 8 mm | 6 mm | 6 1/2 | TPE Rubber | 0° to 155° | Durometer 60A | Medium Hard | Black | 0000000 | 0000 |
Panel gaskets seal out liquid and dust while holding panels securely in place. Quick-install panel gaskets can be installed after what you’re building is assembled, but they’re more visible than other panel gasket types.
For Rail Ht. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | For T-Slot Wd. | For Panel Thick. | Lg., ft. | Material | Temperature Range, °F | Hardness | Hardness Rating | Color | Each | |
| 45 mm | 90 mm | 10 mm | 10 mm | 6 1/2 | Polypropylene Plastic/TPE Rubber | 32° to 300° | Durometer 65A | Medium Hard | Black | 0000000 | 000000 |
T-Slotted Framing Bumpers
Bumpers and surface guards cushion doors and other moving parts to prevent damage and reduce noise.
Bumpers cushion a single point. Surface guards can be cut to cover the exact length of your T-slotted rail. Polyurethane and TPE resist abrasion better than foam, standing up to the wear of daily use.
For Rail Ht. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | OD | Projection | Color | Material | Bumper Shape | Mounting Fasteners Included | Each | |
| 1" | 2" | 3" | 3/4" | 3/4" | Black | Polyurethane Rubber | Round | Yes | 00000000 | 000000 |
| 1" | 2" | 3" | 1" | 9/16" | Black | SBR Rubber | Round | Yes | 00000000 | 0000 |
| 1" | 2" | 3" | 1" | 13/16" | Black | Nitrile Rubber | Tapered Round | Yes | 00000000 | 0000 |
| 1 1/2" | 3" | 4 1/2" | 1 1/4" | 1" | Black | Nitrile Rubber | Tapered Round | Yes | 00000000 | 0000 |
| 1 1/2" | 3" | 4 1/2" | 1 1/4" | 1 1/4" | Black | Polyurethane Rubber | Round | Yes | 00000000 | 00000 |
| 1 1/2" | 3" | 4 1/2" | 1 1/2" | 5/8" | Black | SBR Rubber | Round | Yes | 00000000 | 0000 |
| 1 1/2" | 3" | 4 1/2" | 1 1/2" | 13/16" | Black | Polyurethane Rubber | Round | Yes | 00000000 | 00000 |
| 1 1/2" | 3" | 4 1/2" | 1 1/2" | 1 1/4" | Black | Nitrile Rubber | Tapered Round | Yes | 00000000 | 0000 |
| 25mm, 30mm | 50mm, 60mm | __ | 1" | 9/16" | Black | SBR Rubber | Round | Yes | 0000000 | 0000 |
| 30mm | 60mm | 90mm | 1" | 13/16" | Black | Nitrile Rubber | Tapered Round | Yes | 00000000 | 0000 |
| 30mm | 60mm | 90mm | 1 1/4" | 1" | Black | Nitrile Rubber | Tapered Round | Yes | 00000000 | 0000 |
| 30mm | 60mm | 90mm | 1 1/2" | 1 1/4" | Black | Nitrile Rubber | Tapered Round | Yes | 00000000 | 00000 |
| 40mm | 80mm | 120mm | 1 1/4" | 1 5/16" | Black | Polyurethane Rubber | Round | Yes | 0000000 | 00000 |
| 40mm | 80mm | 120mm | 1 3/4" | 1 11/16" | Black | Polyurethane Rubber | Round | Yes | 00000000 | 00000 |
| 40mm, 45mm | 80mm, 90mm | 120mm | 1 1/2" | 5/8" | Black | SBR Rubber | Round | Yes | 00000000 | 0000 |
Concealed bumpers mount into a rail slot to gently stop rail slides and other moving parts inside the rail.
For Rail Ht. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Lg. | Color | Material | Mounting Fasteners Included | Each | |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 1 9/16" | Silver | Nitrile Rubber | Yes | 00000000 | 00000 |
Surface guards are flexible enough to be pushed into a rail slot, where they’ll stay without fasteners. Flat surface guards fit into a rail slot and protect one side when used alone. Flat surface guards with a corner edge press into a rail slot and protect one corner and a side. To protect two connecting sides of a rail, combine a flat surface guard with one that has a corner edge.
Guards with static control protect sensitive electronic equipment by preventing the buildup of electrostatic discharge. High-visibility guards are often used in high-traffic areas to warn people of a hazard.
Surface Guards | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Rail Ht. | End Caps | Corner Caps | ||||||||||||
| Single | Double and Quad | Triple | Lg., ft. | Wd. | Projection | Color | Material | Safety Properties | Each | Each | Each | |||
Flat | ||||||||||||||
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 6 1/2 | 1 9/16" | 5/8" | Black | TPE Rubber | __ | 00000000 | 000000 | 00000000 | 00000 | 000000 | 00 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 6 1/2 | 1 9/16" | 5/8" | Black | TPE Rubber | Static Control | 00000000 | 000000 | 00000000 | 0000 | 000000 | 00 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 6 1/2 | 1 9/16" | 5/8" | Black/Yellow | TPE Rubber | High Visibility | 00000000 | 00000 | 00000000 | 0000 | 000000 | 00 |
Flat with Corner Edge | ||||||||||||||
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 6 1/2 | 2 3/16" | 5/8" | Black | TPE Rubber | __ | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 6 1/2 | 2 3/16" | 5/8" | Black | TPE Rubber | Static Control | 00000000 | 000000 | 00000000 | 0000 | 00000000 | 0000 |
Clamp-On Framing and Fittings
Fittings come in two pieces to clasp over rails, making assembly and disassembly quicker than our other framing. Use it to form temporary partitions, modular conveyors, and workstations. To assemble, clamp fittings onto the rail and tighten the included cap screw and nut. For permanent connections and added strength, fittings have a 5/32" hole to drill in an additional screw (not included).
Swivel stem casters fit directly into the end of the rail.
Swivel plate casters clamp onto horizontal rails.
For Rail OD | Caster | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mounting Foot Type | Features | Inch | Metric, mm | Capacity, lbs. | Material | Frame Material | Wheel Dia. | Wheel Material | Mounting Fasteners Included | Each | |
| Swivel Stem Caster | __ | 1.08" | 28 | 150 | Rubber | Steel | 3" | Red Rubber | Yes | 0000000 | 000000 |
| Swivel Stem Caster | Brake | 1.08" | 28 | 150 | Rubber | Steel | 3" | Red Rubber | Yes | 0000000 | 00000 |
| Swivel Plate Caster | Brake | 1.08" | 28 | 350 | Rubber | Steel | 4" | Blue Rubber | Yes | 0000000 | 00000 |