This grease remains stable and in place under high pressure, heavy loads, and shock loads. It is NSF Registered H1 and FDA compliant for incidental food contact. It's often used to lubricate heavy-duty food production equipment.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.

Weld load measures a grease's ability to withstand pressure in kilograms of force (kgf). The higher the rating, the more pressure the grease can withstand.

Grease with aluminum thickener has good moisture resistance and excellent oxidation resistance. Grease with calcium sulfonate thickener has good heat resistance and excellent moisture and oxidation resistance. It cannot be sold to Cailfornia due to local regulatory limits on VOC (volatile organic compounds).

Grease with PTFE has small particles of PTFE that reduce friction and help the grease maintain its lubricity. Grease with zinc neutralizes acid and is a good replacement for leaded grease.

Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.

Lubricate the ball and roller bearings that support your highest loads, such as wheels and heavy equipment. Thickened with lithium, it has good heat and moisture resistance.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 1 is about the consistency of tomato paste. NLGI 2 is about the consistency of peanut butter.

Weld load measures a grease's ability to withstand pressure in kilograms of force (kgf). The higher the rating, the more pressure the grease can withstand.

Grease with moly (molybdenum disulfide) has excellent resistance to wear and can withstand high-load and high-pressure applications.

Grease that cannot be sold to regions outside the United States is restricted by product labeling requirements.

Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.

Shell Gadus S2 V220 also handles shock loads.

Lubricate ball and roller bearings for high-load applications. Often used on food-processing equipment, generators, and furnace door hinges, this grease is NSF registered H1 and meets FDA Compliant 21 CFR 178.3570 for incidental food contact. It has small particles of PTFE that reduce friction and help the grease maintain its lubricity across a wide range of temperatures.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.

Weld load measures a grease's ability to withstand pressure in kilograms of force (kgf). The higher the rating, the more pressure the grease can withstand.

Grease lubricates most efficiently within the listed temperature range. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.

Lithium thickener allows this grease to withstand over 30% more pressure than our standard ball screw grease. It is long lasting and resists heat and moisture.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.

Weld load measures a grease's ability to withstand pressure in kilograms of force (kgf). The higher the rating, the more pressure the grease can withstand.

Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.

Use with lever-grip grease guns for THK grease (sold separately).

Often used with engine bolts and heavily-loaded, slow-moving gears, these lubricants are formulated with moly (molybdenum disulfide) to prevent parts from locking together under high loads and pressure. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Lubricants with aluminum have good corrosion resistance. Lubricants with nickel withstand extreme temperatures and harsh chemicals, such as acetylene and ammonia. Lubricants with graphite have good chemical and corrosion resistance. They’re often used with gears and splines under high loads at low speeds.

Bostik Never-Seez Blue Moly is often used with automotive engine bolts and in chemical-processing machinery.

Use this oil at pressures up to 50,000 psi. Made with petroleum wax, it repels water and resists corrosion.

Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.

For use in worm gears, this oil stands up to high pressure. Use it in food-processing and preparation areas. It is NSF registered H1 for incidental food contact.

Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.

Oil in a pail has an FZG load stage rating greater than or equal to 12, designating it as a high-pressure oil.

Phosphorus additives give this oil the strength it needs for use in worm gears.

Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.

Weld load measures an oil’s ability to withstand pressure in kilograms of force (kgf). The higher the rating, the more pressure the oil can withstand.