Made of EPDM rubber, these gaskets also resist salt water.

Also resistant to salt water.

These gaskets have a perforated plate to filter, separate, and strain liquids or dry materials in your line.

The built-in screen is made of corrosion-resistant 316 stainless steel and provides inline straining.

Stick these gaskets around door and vent cutouts or replace worn seals to maintain your enclosure's NEMA rating.

These gaskets provide a tight seal in steam applications.

Form a tight seal on cam-and-groove hose connections without fear of contaminating your food processing line. The metal additive in these gaskets can be picked up by a metal detector, so you can find and remove them if they fall into your line.

Dispense a uniform bead when you press the nozzle.

Use cartridges with a standard caulk gun for quick and easy dispensing.

These gasket makers come in a tube.

Made of EPDM foam rubber, these seals have hollow construction for more compressibility than solid seals.

Hollow construction makes these seals more compressible than solid rubber seals. Made of EPDM rubber, they also resist salts.

These seals have an EPDM foam rubber bulb.

These seals have a solid bulb.

These seals have an EPDM foam rubber wiper, which is softer and more flexible than EPDM rubber wipers.

Use these H-seals to lock out moisture, dust, and debris around windows and panels.

Softer and more flexible than EPDM rubber seals, these EPDM foam rubber seals will effortlessly conform to uneven surfaces.

EPDM is blended with neoprene and SBR to create a general-purpose foam that offers good resistance to water and wear.

Made of EPDM, this foam has the best resistance to water, sunlight, and oxidation of all the foam we offer.

Sunlight, ozone, and water won’t affect these sheets and strips.

With greater strength than standard Weather-Resistant EPDM, these sheets and strips provide better shock-absorbing qualities and longer life.

For every 1/16" of thickness, there is one layer of super-strong fiberglass cloth that stands up to high stress and flex. Use these sheets and strips as flange gaskets and anywhere heavy compression would squeeze nonreinforced EPDM out of place.

Used to seal narrow spaces such as channels, these tubes offer more compression than solid EPDM rods.

These O-rings also resist ethanol and ethylene glycol.

When you need an O-ring that’s not an industry standard size, we can make one to fit your requirements.

Also known as Boss O-rings, these O-rings are for use in tube fittings with a straight-thread connection.

These assortments include a mix of EPDM O-rings that resist water and steam and silicone O-rings that resist temperatures up to 450° F.

In addition to water and steam, this EPDM cord stock resists diluted salt solutions, ethanol, and isopropyl alcohol.

Made of rubber, this trim resists abrasion better than plastic trim. Often used on panels, boards, signs, and mirrors, it protects edges from impact.

Guard the edges of panels, signs, glass, and other surfaces in food plants from frequent bumps and scrapes. This trim is FDA compliant, so it’s safe to directly touch food.

Cut the thin layer of rubber in the center of these grommets to create custom IDs to securely hold and protect wire, cable, and cords. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration. Also known as webbed grommets.

Seal the space between your double doors.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Made from silicone, these sealants are RTV (room-temperature vulcanizing).

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.

These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

Prepare joints and surfaces to ensure proper sealant adhesion.

Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.