Material Material | Show |
|---|
|
Material Material | Hide |
|---|
System of Measurement System of Measurement |
|---|
|
For OD For OD |
|---|
For Shape For Shape |
|---|
 | Round |
Profile Profile |
|---|
| Straight |
Color Color |
|---|
 | Black |
Heat-Shrink Tubing Type Heat-Shrink Tubing Type |
|---|
 | No-Heat Tubing |
Maximum Temperature Maximum Temperature |
|---|
|
Performance Properties Performance Properties |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Clarity Clarity |
|---|
 | Opaque |
For Maximum Voltage For Maximum Voltage |
|---|
|
Specifications Met Specifications Met |
|---|
|
Dielectric Strength Dielectric Strength |
|---|
|
Shape Shape |
|---|
 | Round |
About Heat-Shrink Tubing
More
No-Heat Shrink Tubing
- Material: EPDM Rubber
- Shrink Ratio: See Table
- Dielectric Strength: 365V/mil
- Temperature Range: -40° to 190° F
- ANSI C119.1, CE Marked
Create a permanent seal without applying heat. Also known as cold-shrink tubing, this tubing has a removable spiral-wound core. Slide the tubing over wire and cable and pull out the core. When the core is removed, the tubing contracts and conforms to the underlying cable. The length shrinks by several inches. Made of EPDM rubber, it resists chemicals including acids, alkalies, and ozone. Resistant to UV, it won’t fade or discolor when exposed to sunlight. It meets ANSI C119.1 for water seal requirements and can be submerged.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
ID | Lg. | |||||||
|---|---|---|---|---|---|---|---|---|
| Shrink Ratio | Before Shrinking | Min. After Shrinking | Before Shrinking | Max. Covered | For Max. Voltage | Color | Each | |
| 2:1 | 0.82" | 0.4" | 8" | 3" | 1,000V | Black | 0000000 | 000000 |
| 2:1 | 1.18" | 0.55" | 9" | 5" | 1,000V | Black | 0000000 | 00000 |
| 2:1 | 1.18" | 0.55" | 11" | 7" | 1,000V | Black | 0000000 | 00000 |
| 2:1 | 1.38" | 0.67" | 6" | 2" | 1,000V | Black | 0000000 | 00000 |
| 2:1 | 1.38" | 0.67" | 12" | 8" | 1,000V | Black | 0000000 | 00000 |
| 2:1 | 1.38" | 0.67" | 16" | 12" | 1,000V | Black | 0000000 | 00000 |
| 2:1 | 1.94" | 0.95" | 6" | 2" | 1,000V | Black | 0000000 | 00000 |
| 2:1 | 1.94" | 0.95" | 12" | 8" | 1,000V | Black | 0000000 | 00000 |
| 2:1 | 1.94" | 0.95" | 18" | 14" | 1,000V | Black | 0000000 | 00000 |
| 2:1 | 2.67" | 1.27" | 6" | 2" | 1,000V | Black | 0000000 | 00000 |
| 2:1 | 2.67" | 1.27" | 9" | 5" | 1,000V | Black | 0000000 | 00000 |
| 2:1 | 2.67" | 1.27" | 18" | 14" | 1,000V | Black | 0000000 | 00000 |
| 8:1 | 0.82" | 0.1" | 8" | 3" | 1,000V | Black | 0000000 | 00000 |
Chemical-Resistant Round Caps
These caps have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. They are made of flexible EPDM rubber that conforms for a snug fit.
For technical drawings and 3-D models, click on a part number.
| For OD | Inside Ht. | Max. Temp., °F | Color | Pkg. Qty. | Pkg. | |
Flexible EPDM Rubber | ||||||
|---|---|---|---|---|---|---|
| 0.02" | 1/2" | 200° | Black | 100 | 00000000 | 00000 |
| 0.034" | 1/2" | 200° | Black | 100 | 00000000 | 0000 |
| 3/64" | 3/4" | 200° | Black | 100 | 0000000 | 0000 |
| 1/16" | 3/4" | 200° | Black | 100 | 00000000 | 00000 |
| 5/64" | 1" | 200° | Black | 50 | 0000000 | 0000 |
| 3/32" | 3/4" | 200° | Black | 50 | 0000000 | 0000 |
| 0.1" | 1/2" | 200° | Black | 50 | 0000000 | 0000 |
| 7/64" | 3/4" | 200° | Black | 50 | 0000000 | 0000 |
| 1/8" | 1" | 200° | Black | 50 | 0000000 | 0000 |
| 9/64" | 1" | 200° | Black | 50 | 0000000 | 0000 |
| 5/32" | 1" | 200° | Black | 50 | 0000000 | 0000 |
| 11/64" | 1" | 200° | Black | 50 | 0000000 | 0000 |
| 3/16" | 1" | 200° | Black | 50 | 0000000 | 00000 |
| 7/32" | 1" | 200° | Black | 50 | 0000000 | 0000 |
| 0.223" | 1" | 200° | Black | 50 | 0000000 | 0000 |
| 15/64" | 1" | 200° | Black | 50 | 0000000 | 00000 |
| 1/4" | 1" | 200° | Black | 50 | 0000000 | 00000 |
| 9/32" | 1" | 200° | Black | 50 | 0000000 | 0000 |
| 5/16" | 1" | 200° | Black | 50 | 0000000 | 00000 |
| 11/32" | 1" | 200° | Black | 50 | 0000000 | 00000 |
| 0.355" | 1 1/2" | 200° | Black | 50 | 0000000 | 00000 |
| 3/8" | 1" | 200° | Black | 25 | 0000000 | 0000 |
| 13/32" | 1" | 200° | Black | 25 | 0000000 | 0000 |
| 7/16" | 1" | 200° | Black | 25 | 0000000 | 0000 |
| 0.456" | 1 1/2" | 200° | Black | 25 | 0000000 | 0000 |
| 15/32" | 1" | 200° | Black | 10 | 0000000 | 0000 |
| 1/2" | 1 1/2" | 200° | Black | 25 | 0000000 | 0000 |
| 0.535" | 1 1/2" | 200° | Black | 50 | 0000000 | 00000 |
| 9/16" | 1 1/2" | 200° | Black | 25 | 0000000 | 0000 |
| 5/8" | 1 1/2" | 200° | Black | 50 | 0000000 | 00000 |
| 11/16" | 1 1/2" | 200° | Black | 10 | 0000000 | 0000 |
| 3/4" | 1 1/2" | 200° | Black | 10 | 0000000 | 0000 |
| 13/16" | 1 1/2" | 200° | Black | 25 | 0000000 | 0000 |
| 7/8" | 1 1/2" | 200° | Black | 10 | 0000000 | 0000 |
| 15/16" | 1 1/2" | 200° | Black | 10 | 0000000 | 0000 |
| 1" | 1 1/2" | 200° | Black | 10 | 0000000 | 0000 |
| 1 1/16" | 1 1/2" | 200° | Black | 10 | 0000000 | 0000 |
| 1 1/8" | 1 1/2" | 200° | Black | 5 | 0000000 | 0000 |
| 1 3/16" | 1 1/2" | 200° | Black | 5 | 0000000 | 0000 |
| 1 1/4" | 1 1/2" | 200° | Black | 5 | 0000000 | 0000 |
| 1 3/8" | 1 1/2" | 200° | Black | 5 | 0000000 | 0000 |
| 1 1/2" | 1 1/2" | 200° | Black | 5 | 0000000 | 0000 |
| 1 5/8" | 1 1/2" | 200° | Black | 5 | 0000000 | 0000 |
| 1 3/4" | 2" | 200° | Black | 5 | 00000000 | 0000 |
| 1 7/8" | 2" | 200° | Black | 5 | 00000000 | 0000 |
| 2" | 2" | 200° | Black | 5 | 00000000 | 0000 |
| 2 1/2" | 1 1/2" | 200° | Black | 5 | 00000000 | 00000 |
| 2 3/4" | 1 1/2" | 200° | Black | 5 | 00000000 | 00000 |
| 3 1/2" | 1 1/2" | 200° | Black | 1 | 00000000 | 0000 |
| 4" | 1 3/4" | 200° | Black | 1 | 00000000 | 0000 |
Create-Your-Own Round Bellows with Flange Ends
Interlock bellows, mounting flanges, and links to create a custom-length bellows. These molded bellows are airtight to keep contaminants out. Air venting may be necessary in fast-cycling applications. Mount these bellows to surfaces with the mounting flanges. Slide them over moving parts, such as rods and shafts.
Mounting flanges fit on the ends of each custom-length bellows. Drill a hole to fit your machine part.
Links connect multiple bellows.
Supports fit inside links to add stability. They are required when connecting three or more bellows. Drill a hole to fit your machine part.
Breather vent allows air venting. Drill a hole in the flange to mount the vent.
Length | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| ID | OD | Extended | Retracted | Travel | Required ID Clearance | Max. Hole Dia. | Material Thick. | Temp. Range, °F | Each | |
EPDM Rubber—Protects Against Abrasive Grit, UV Radiation, Coolant, Cutting Fluid, Dust, Metal Chips, Salt Water, Water, Wood Chips | ||||||||||
| 1 15/16" | 3 1/4" | 13 3/4" | 2 1/2" | 11 1/4" | 3/8" | 2 5/16" | 0.047" | -40° to 230° | 0000000 | 000000 |
| 2 3/16" | 4 3/16" | 29 1/2" | 3 15/16" | 25 9/16" | 3/8" | 3 1/8" | 0.047" | -40° to 230° | 0000000 | 00000 |
| 2 7/16" | 4 3/4" | 27 1/2" | 3 11/16" | 23 13/16" | 3/8" | 3 15/16" | 0.047" | -40° to 230° | 0000000 | 00000 |
| 2 3/4" | 4 3/16" | 8 11/16" | 1 9/16" | 7 1/8" | 3/8" | 3 1/8" | 0.047" | -40° to 230° | 0000000 | 00000 |
| OD | Each | |
| 5/16" | 0000000 | 00000 |
Grommet Assortments
Keep grommets of various sizes on hand to solve whatever problems arise. Push these flexible grommets into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration. All have a medium hardness rating for a balance of cushioning and impact resistance.
EPDM grommets are UV, ozone, and chemical resistant. They can be used outdoors.
| Number of Pieces | Hardness Rating | Hardness | Temperature Range, °F | For Use Outdoors | Container Type | Includes | Color | Each | |
EPDM Rubber | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 99 | Medium | Durometer 50A | -60° to 300° | Yes | Plastic Case | Grommets for 3/16" Hole Diameter with 1/8" ID (25 ea.) Grommets for 1/4" Hole Diameter with 1/8" ID (25 ea.) Grommets for 3/8" Hole Diameter with 1/4" ID (25 ea.) Grommets for 1/2" Hole Diameter with 3/8" ID (12 ea.) Grommets for 5/8" Hole Diameter with 3/8" ID (6 ea.) Grommets for 7/8" Hole Diameter with 5/8" ID (6 ea.) | Black | 0000000 | 000000 |