Clear All
Formulation Formulation |
|---|
|
Container Size Container Size |
|---|
|
|
Adhesive Type Adhesive Type | Show |
|---|
|
Adhesive Type Adhesive Type | Hide |
|---|
|
|
Number of 1/2" Diameter Rods Set at 4 1/2" Installation Depth Number of 1/2" Diameter RodsSet at 4 1/2" Installation Depth |
|---|
|
Ultimate Pull-Out Strength (in 4,000 psi Concrete) Ultimate Pull-Out Strength(in 4,000 psi Concrete) |
|---|
For Joining For Joining |
|---|
|
Type Type |
|---|
|
Consistency Consistency |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Clarity Clarity |
|---|
|
Viscosity Viscosity |
|---|
|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Structural Adhesives
More
Anchoring Adhesives for Concrete
Permanently set threaded rods, studs, and rebar in dry concrete with these two-part epoxies. They form a weather-resistant chemical bond that seals out moisture and resists vibration and dynamic loads better than mechanical anchors. The size listed is the combined total of the two parts. Warning: Allowable pull-out strength is 25% of ultimate values or less, as required by building authorities.
Adhesives in cartridges can also be used in damp concrete. Use a mixer nozzle and dispensing gun (dispensing gun sold separately) to simultaneously mix and dispense adhesive.
Adhesives in pails have epoxy and hardener in separate containers that can be mixed in the pail.
Cartridges
8.5 fl. oz. and 10.1 fl. oz. Cartridges
8.6 fl. oz. and 22 fl. oz. Cartridges
| Container Size, fl. oz. | Begins to Harden | Reaches Full Strength | No. of 1/2" Dia. Rods Set at 4 1/2" Installation Dp. | Ultimate Pull-Out Strength (in 4,000 psi Concrete) | Mix Ratio | Consistency | Temp. Range, °F | Color | Each | |
| 8.5 | 5 min. @ 40° F | 48 hrs. | 14 in 5/8" dia. hole | 8,600 lbs.—3/8" threaded rod dia. × 3 1/2" installation dp. 15,300 lbs.—1/2" threaded rod dia. × 4 1/2" installation dp. 22,500 lbs.—5/8" threaded rod dia. × 5 5/8" installation dp. 35,000 lbs.—3/4" threaded rod dia. × 6 3/4" installation dp. 43,500 lbs.—7/8" threaded rod dia. × 7 7/8" installation dp. 47,000 lbs.—1" threaded rod dia. × 9" installation dp. 67,200 lbs.—1 1/4" threaded rod dia. × 11 1/4" installation dp. | 1:1 | Paste | 50° to 110° | Teal | 000000 | 000000 |
| 8.6 | 20 min. @ 75° F | 24 hrs. | 12 in 5/8" dia. hole | 8,600 lbs.—3/8" threaded rod dia. × 3 1/2" installation dp. 15,300 lbs.—1/2" threaded rod dia. × 4 1/2" installation dp. 22,500 lbs.—5/8" threaded rod dia. × 5 5/8" installation dp. 35,000 lbs.—3/4" threaded rod dia. × 6 3/4" installation dp. 43,500 lbs.—7/8" threaded rod dia. × 7 7/8" installation dp. 47,000 lbs.—1" threaded rod dia. × 9" installation dp. 67,200 lbs.—1 1/4" threaded rod dia. × 11 1/4" installation dp. | 1:1 | Paste | 40° to 110° | Gray | 000000000 | 00000 |
| 10.1 | 9 min. @ 60° F | 1 hrs. | 25 in 9/16" dia. hole | 7,000 lbs.—3/8" threaded rod dia. × 3 3/8" installation dp. 13,000 lbs.—1/2" threaded rod dia. × 4 1/2" installation dp. 16,500 lbs.—5/8" threaded rod dia. × 5 5/8" installation dp. 22,000 lbs.—3/4" threaded rod dia. × 6 3/4" installation dp. 32,000 lbs.—7/8" threaded rod dia. × 7 7/8" installation dp. 41,000 lbs.—1" threaded rod dia. × 9" installation dp. | 10:1 | Gel | 15° to 145° | Gray | 0000000 | 00000 |
| 22 | 5 min. @ 60° F | 24 hrs. | 35 in 5/8" dia. hole | 8,600 lbs.—3/8" threaded rod dia. × 3 1/2" installation dp. 15,300 lbs.—1/2" threaded rod dia. × 4 1/2" installation dp. 22,500 lbs.—5/8" threaded rod dia. × 5 5/8" installation dp. 35,000 lbs.—3/4" threaded rod dia. × 6 3/4" installation dp. 43,500 lbs.—7/8" threaded rod dia. × 7 7/8" installation dp. 47,000 lbs.—1" threaded rod dia. × 9" installation dp. 67,200 lbs.—1 1/4" threaded rod dia. × 11 1/4" installation dp. | 1:1 | Paste | 50° to 110° | Gray | 0000000 | 00000 |
| Dispensing Gun for 8.6 fl. oz. Cartridges | 000000000 | Each | 000000 |
| Mixer Nozzle for 8.6 fl. oz. Cartridges | 000000000 | Each | 0000 |
| Mixer Nozzle for 8.5 fl. oz. and 22 fl. oz. Cartridges | 0000000 | Each | 0000 |
| Dispensing Gun for 22 fl. oz. Cartridges | 0000000 | Each | 000000 |
| Dispensing Gun for 8.5 fl. oz Cartridges | 0000000 | Each | 00000 |
| Dispensing Gun for 10.1 fl. oz Cartridges | 00000000 | Each | 00000 |
| Mixer Nozzle for 10.1 fl. oz. Cartridges | 0000000 | Each | 0000 |
Pails
| Container Size, gal. | Begins to Harden | Reaches Full Strength | No. of 1/2" Dia. Rods Set at 4 1/2" Installation Dp. | Ultimate Pull-Out Strength (in 4,000 psi Concrete) | Mix Ratio | Consistency | Temp. Range, °F | Color | Each | |
| 2 | 30 min. @ 75° F | 24 hrs. | 100 in 1" dia. hole | Not Rated | 2:1 | Paste | 50° to 110° | Gray | 0000000 | 000000 |
| 5 | 30 min. @ 75° F | 24 hrs. | 500 in 1" dia. hole | Not Rated | 2:1 | Paste | 50° to 110° | Gray | 0000000 | 000000 |
Anchoring Adhesive Kits for Concrete
Permanently set threaded rods, studs, and rebar in concrete with these kits. They include applicators and mixer nozzles to simultaneously mix and dispense the adhesive. These adhesives form a weather-resistant chemical bond that seals out moisture and resists vibration and dynamic loads better than mechanical anchors. Warning: Allowable pull-out strength is 25% of ultimate values or less, as required by building authorities.
| Container Size, fl. oz. | Begins to Harden | Reaches Full Strength | No. of 1/2" Dia. Rods Set at 4 1/2" Installation Dp. | Ultimate Pull-Out Strength (in 4,000 psi Concrete) | Mix Ratio | Consistency | Temp. Range, °F | Color | Each | |
| 8.6 | 20 min. @ 75° F | 24 hrs. | 12 in 5/8" dia. hole | 8,600 lbs.—3/8" threaded rod dia. × 3 1/2" installation dp. 15,300 lbs.—1/2" threaded rod dia. × 4 1/2" installation dp. 22,500 lbs.—5/8" threaded rod dia. × 5 5/8" installation dp. 35,000 lbs.—3/4" threaded rod dia. × 6 3/4" installation dp. 43,500 lbs.—7/8" threaded rod dia. × 7 7/8" installation dp. 47,000 lbs.—1" threaded rod dia. × 9" installation dp. 67,200 lbs.—1 1/4" threaded rod dia. × 11 1/4" installation dp. | 1:1 | Paste | 40° to 110° | Gray | 000000000 | 0000000 |
Concrete Bonding Adhesives
Bond new concrete to old concrete, or use this epoxy as a primer for epoxy coatings on concrete surfaces. Mix the amount you need; the size listed is the combined total of the two parts.
Container | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size, gal. | Type | Begins to Harden | Reaches Full Strength | Mix Ratio | Consistency | Temp. Range, °F | Color | Each | |
| 0.75 | Can | 30 min. | 12 hrs. | 2:1 | Thick Liquid | 50° to 100° | Amber | 0000000 | 000000 |
Submersible Anchoring Adhesives for Concrete
8.6 fl. oz.
9.5 fl. oz.
20.7 fl. oz.
28 fl. oz.
When concrete is saturated with or submerged in water, use these epoxies to permanently set threaded rods, studs, and rebar. They form a weather-resistant chemical bond that seals out moisture and resists vibration and dynamic loads better than mechanical anchors. Warning: Allowable pull-out strength is 25% of ultimate values or less, as required by building authorities. Use a mixer nozzle and dispensing gun (dispensing gun sold separately) to simultaneously mix and dispense adhesive.
| Container Size, fl. oz. | Begins to Harden | Reaches Full Strength | No. of 1/2" Dia. Rods Set at 4 1/2" Installation Dp. | Ultimate Pull-Out Strength (in 4,000 psi Concrete) | Mix Ratio | Consistency | Temp. Range, °F | Color | Each | |
| 8.6 | 20 min. @ 75° F | 4 hrs. | 20 in 9/16'' dia. hole | 9,200 lbs.—3/8" Threaded Rod Dia. × 3 3/8" Installation Dp. 22,300 lbs.—1/2" Threaded Rod Dia. × 4 1/2" Installation Dp. 29,900 lbs.—5/8" Threaded Rod Dia. × 5 5/8" Installation Dp. 39,200 lbs.—3/4" Threaded Rod Dia. × 6 3/4" Installation Dp. 53,800 lbs.—7/8" Threaded Rod Dia. × 7 7/8" Installation Dp. 62,900 lbs.—1" Threaded Rod Dia. × 9" Installation Dp. 88,500 lbs.—1 1/4" Threaded Rod Dia. × 11 1/4" Installation Dp. | 1:1 | Paste | 35° to 110° | Gray | 0000000 | 000000 |
| 9.5 | 5 min. @ 70° F | 45 min. | 25 in 9/16" dia. hole | 10,900 lbs.—3/8" threaded rod dia. × 3 1/2" installation dp. 17,100 lbs.—1/2" threaded rod dia. × 4 1/2" installation dp. 26,500 lbs.—5/8" threaded rod dia. × 5 5/8" installation dp. 29,500 lbs.—3/4" threaded rod dia. × 6 3/4" installation dp. 44,500 lbs.—7/8" threaded rod dia. × 7 7/8" installation dp. 48,000 lbs.—1" threaded rod dia. × 9" installation dp. 56,500 lbs.—1 1/4" threaded rod dia. × 11 1/4" installation dp. | 10:1 | Paste | 15° to 110° | Gray | 0000000 | 00000 |
| 20.7 | 20 min. @ 75° F | 4 hrs. | 48 in 9/16'' dia. hole | 9,200 lbs.—3/8" Threaded Rod Dia. × 3 3/8" Installation Dp. 22,300 lbs.—1/2" Threaded Rod Dia. × 4 1/2" Installation Dp. 29,900 lbs.—5/8" Threaded Rod Dia. × 5 5/8" Installation Dp. 39,200 lbs.—3/4" Threaded Rod Dia. × 6 3/4" Installation Dp. 53,800 lbs.—7/8" Threaded Rod Dia. × 7 7/8" Installation Dp. 62,900 lbs.—1" Threaded Rod Dia. × 9" Installation Dp. 88,500 lbs.—1 1/4" Threaded Rod Dia. × 11 1/4" Installation Dp. | 1:1 | Paste | 35° to 110° | Gray | 0000000 | 00000 |
| 28 | 5 min. @ 70° F | 45 min. | 75 in 9/16" dia. hole | 10,900 lbs. —3/8" Threaded Rod Dia. × 3 3/8" Insulation Dp. 17,100 lbs.—1/2" threaded rod dia. × 4 1/2" installation dp. 26,500 lbs.—5/8" threaded rod dia. × 5 5/8" installation dp. 29,500 lbs.—3/4" threaded rod dia. × 6 3/4" installation dp. 44,500 lbs.—7/8" threaded rod dia. × 7 7/8" installation dp. 48,000 lbs.—1" threaded rod dia. × 9" installation dp. 56,500 lbs.—1 1/4" threaded rod dia. × 11 1/4" installation dp. | 10:1 | Paste | 15° to 110° | Gray | 0000000 | 00000 |
| Dispensing Gun for 28 fl. oz. Cartridges | 0000000 | Each | 0000000 |
| Replacement Mixer Nozzle for 28 fl. oz. Cartridges | 0000000 | Each | 0000 |
| Replacement Mixer Nozzle for 8.6 fl. oz. Cartridges | 000000000 | Each | 0000 |
| Dispensing Gun for 8.6 fl. oz. Cartridges | 0000000 | Each | 00000 |
| Dispensing Gun for 20.7 fl. oz. Cartridges | 0000000 | Each | 000000 |
| Replacement Mixer Nozzle for 20.7 fl. oz. Cartridges | 000000000 | Each | 0000 |
| Dispensing Gun for 9.5 fl. oz. Cartridges | 00000000 | Each | 00000 |
| Replacement Mixer Nozzle for 9.5 fl. oz. Cartridges | 00000000 | Each | 0000 |