Beige Epoxies | McMaster-Carr

Filter by

Container Type

For Use On

Color

Container Size

Type

Reaches Full Strength

Formulation

Consistency

Begins to Harden

Mix Ratio

For Joining

Manufacturer

Minimum Application Temperature

Contains Aggregate

Mixing Required

For Use Outdoors

Clarity

Manufacturer Model Number

DFARS Compliance

RoHS Compliance

Maximum Application Temperature

REACH Compliance

Process After Hardening

Forward

How can we improve?

22 Products

About Structural Adhesives

Epoxy Structural Adhesives

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

9460 and E-20NS are nonsagging, so they won't drip from vertical or overhead surfaces.

Loctite® Adhesives

	Container				Strength
Mfr. Model No.	Size	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
1C-LV	1.69 fl. oz.	Cartridge	20 min.	72 hrs.	2,100	Not Rated	2:1	Thick Liquid (66,750 cP)	-65° to 250°	Beige	Metal, Plastic, Rubber	0000000	000000
E-20NS	1.69 fl. oz.	Cartridge	20 min.	24 hrs.	2,790	Not Rated	2:1	Thick Liquid (60,000 cP)	-65° to 250°	Beige	Metal, Plastic, Rubber	0000000	00000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Mixer Nozzle for 1.69 fl. oz. Cartridges	00000000	00000
Air-Powered Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges	000000000	000000
Dispensing Gun for 1.69 fl. oz. Cartridges	00000000	00000

Toughened Epoxy Structural Adhesives

Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds. The most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.

The size listed is the combined total of the two parts. Use with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

DP420NS, DP460NS, E-40HT, and 9462 are nonsagging, so they won't drip from vertical or overhead surfaces.

Loctite® Adhesives

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
9462	1.69	Cartridge	55 min.	72 hrs.	4,180	22	1:1	Thick Liquid (70,000 cP)	-65° to 250°	Beige	Metal, Plastic, Rubber	0000000	000000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Mixer Nozzle for 1.69 fl. oz. Cartridges	00000000	00000
Air-Powered Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges	000000000	000000
Dispensing Gun for 1.69 fl. oz. Cartridges	00000000	00000

Concrete Patching Compounds

Patch concrete floors, stairs, and walls with these compounds.

Epoxy compounds are three-part compounds consisting of a resin, a hardener, and aggregate in separate containers that can be mixed in the pail. The size listed is the combined total of the parts. They have excellent impact and chemical resistance. Paste compounds are ready for foot traffic in 8-12 hours. Thick liquid compounds are ready for traffic in two hours, and can withstand steel wheels and forklifts.

Container
Size, gal.	Net Weight, lbs.	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approximate Coverage @ Thick.	Max. Thick.	Application Temp. Range, °F	Finishing Method	For Use On	Color		Each
Epoxy
__	10	Pail	30	72 hrs.	Paste	2:1	4 1/2 sq. ft. @ 1/4"	2"	35° to 90°	Drill, Sand	Concrete	Beige	0000000	000000
__	10	Pail	30	72 hrs.	Paste	2:1	4 1/2 sq. ft. @ 1/4"	2"	50° to 100°	Drill, Sand	Concrete	Beige	0000000	00000
__	50	Pail	30	72 hrs.	Paste	2:1	20 sq. ft. @ 1/4"	2"	35° to 90°	Drill, Sand	Concrete	Beige	0000000	000000
__	50	Pail	30	72 hrs.	Paste	2:1	20 sq. ft. @ 1/4"	2"	50° to 100°	Drill, Sand	Concrete	Beige	0000000	000000
2	__	Pail	5	2 hrs.	Thick Liquid	2:1	5 sq. ft. @ 1/4"	Not Rated	50° to 90°	Drill	Concrete	Beige	0000000	00000
5	__	Pail	5	2 hrs.	Thick Liquid	2:1	15 sq. ft. @ 1/4"	Not Rated	50° to 90°	Drill	Concrete	Beige	0000000	000000

Low-Temperature Concrete Patching Compounds

Use these two-part compounds to patch concrete floors, stairs, and walls in cold environments, such as freezers. At room temperature, they cure faster than any of our other concrete patching compounds. Once cured, they withstand impact, abrasion, and chemicals. The size listed is the combined total of the two parts.

Epoxy compounds are ready for foot traffic in ten minutes and vehicle traffic in two hours. Urethane compounds are ready for foot traffic in five minutes and vehicle traffic in ten minutes. Both can be applied with a trowel when mixed with the included aggregate or used as a self-leveling compound when used alone. Mix in the included pail.

Container
Size	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approximate Coverage @ Thick.	Max. Thick.	For Use Outdoors	Application Temp. Range, °F	Color	Finishing Method	For Use On		Each
Epoxy
2 gal.	Pail	10	2 hrs.	Thick Liquid	2:1	7 1/2 sq. ft. @ 1/4"	Not Rated	No	-20° to 40°	Beige	Drill	Concrete	0000000	0000000

Heavy-Traffic Concrete Leveling Compounds

Not only do these leveling compounds withstand severe abrasion, wear, and impact, they stand up to heavy steel-wheel traffic and heavy blows without cracking. Apply with a trowel. They're ready for foot traffic in 12 hours. The resin and hardener are in separate containers that can be mixed in the pail. The size listed is the combined total of the two parts.

Heavy-Traffic Concrete Leveling Compounds

Container									Application
Size	Type	Begins to Harden, hrs.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	Approximate Coverage @ Thick.	Max. Thick.	For Use Outdoors	Temp. Range, °F	Time After Mixing, min.	Finishing Method	For Use On	Color		Each
Epoxy
2 gal.	Pail	12	24	Thick Liquid	2:1	10 sq. ft. @ 1/8"	1/8"	Yes	50° to 90°	30	Drill	Concrete	Beige	0000000	0000000
5 gal.	Pail	12	24	Thick Liquid	2:1	50 sq. ft. @ 1/8"	1/8"	Yes	50° to 90°	30	Drill	Concrete	Beige	0000000	000000

Replacement Liquids

Resin
For Container Size		Each
2 gal.	00000000	000000
5 gal.	00000000	000000
Hardener
2 gal.	00000000	00000
5 gal.	00000000	000000

Chemical-Resistant Heavy-Traffic Concrete Leveling Compounds

These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel-wheel traffic and heavy impact. Apply with a trowel. They're ready for foot traffic in 12 hours. The resin and hardener are in separate containers that can be mixed in the pail. The size listed is the combined total of the two parts.

Container									Application
Size	Type	Begins to Harden, hrs.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	Approximate Coverage @ Thick.	Max. Thick.	For Use Outdoors	Temp. Range, °F	Time After Mixing, min.	Finishing Method	For Use On	Color		Each
Epoxy
2 gal.	Pail	12	24	Thick Liquid	2:1	10 sq. ft. @ 1/8"	1/8"	Yes	50° to 70°	15-20	Drill	Concrete	Beige	000000	0000000
5 gal.	Pail	12	24	Thick Liquid	2:1	50 sq. ft. @ 1/8"	1/8"	Yes	50° to 70°	15-20	Drill	Concrete	Beige	0000000	000000

Concrete Leveling Compounds

Give new life to damaged and worn concrete floors. These leveling compounds also fill minor depressions and cracks. Apply with a trowel.

Epoxy compounds resist abrasion for use in high-traffic areas. They’re ready for foot traffic in 8 hours. The resin and hardener are in separate containers that can be mixed in the pail. The size listed is the combined total of the two parts.

Container									Application
Size, gal.	Type	Begins to Harden, hrs.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	Approximate Coverage @ Thick.	Max. Thick.	For Use Outdoors	Temp. Range, °F	Time After Mixing, min.	Finishing Method	For Use On	Color		Each
Epoxy
5	Pail	8	72	Thick Liquid	2:1	50 sq. ft. @ 1/8"	2"	Yes	50° to 100°	30	Drill, Sand	Concrete	Beige	0000000	0000000