For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers. The size listed is the combined total of the two parts.

Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals. Coatings may chalk with exposure to sunlight.

Apply coatings in a two-gallon can with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Safety-color coatings come in colors approved by OSHA to color-code safety equipment locations, physical hazards, and protective equipment. Safety yellow indicates caution and is often used on tripping hazards, exposed edges, and start buttons.

Coatings that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).

Thinners cannot be sold to Canada due to import regulations.

Unlike paint that must be diluted, this paint comes ready for use with an air brush. Its water-based formula can be cleaned up with soap and water, so air brushes are easy to keep clean.

Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.

This acrylic-lacquer paint produces a thick, durable finish that won’t run or drip as it dries. For best results, use a primer with new or rusted metal and with new wood.

This zero-VOC paint is for use in enclosed occupied areas, such as hospitals, schools, and offices. Apply with a brush, roller, or sprayer.