For Use On For Use On |
---|
|
Color Color | Show |
---|
|
Color Color | Hide |
---|
Consistency Consistency |
---|
|
Formulation Formulation |
---|
|
Type Type |
---|
|
Approximate Coverage @ Thickness Approximate Coverage@ Thickness |
---|
|
|
Mixing Required Mixing Required |
---|
|
Mix Ratio Mix Ratio |
---|
|
Contains Aggregate Contains Aggregate |
---|
|
Temperature to Begin to Harden Temperature toBegin to Harden |
---|
|
Maximum Application Temperature Maximum ApplicationTemperature |
---|
|
Minimum Application Temperature Minimum ApplicationTemperature |
---|
|
Clarity Clarity |
---|
|
For Use Outdoors For Use Outdoors |
---|
|
Reaches Full Strength Reaches Full Strength |
---|
|
Fill cracks up to 4" deep on horizontal surfaces such as floors and sidewalks. These epoxies are shrink, impact, and chemical resistant, and can also be used on wood, fiberglass, and metal surfaces. Use the cartridges with a standard caulk gun (sold separately) for dispensing.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Temp. to Begin to Harden, °F | Consistency | Mix Ratio | For Max. Crack Wd. | Approx. Coverage @ Thick. | For Use Outdoors | Application Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
10 | Cartridge | 15 | 24 | 77° | Thin Liquid | 1:1 | 1/16" | 24 ft. @ 4" | Yes | 50° to 90° | Light Amber | Sand, Tap | Concrete | 00000000 | 000000 |
10 | Cartridge | 15 | 24 | 77° | Thin Liquid | 1:1 | 1/8" | 12 ft. @ 4" | Yes | 50° to 90° | Light Amber | Sand, Tap | Concrete | 00000000 | 00000 |
10 | Cartridge | 15 | 24 | 77° | Thick Liquid | 1:1 | 1/4" | 6 ft. @ 4" | Yes | 50° to 90° | Light Amber | Sand, Tap | Concrete | 00000000 | 00000 |
Fill cracks up to 10" deep on vertical and overhead surfaces. To use this filler, secure the included injection ports to the crack with the two-part epoxy sealer, then spread sealer over the entire crack. Allow sealer 24 hours to cure. Application time for sealer, after mixing, is 40 minutes. To fill the rest of the void, use the cartridge with a standard caulk gun (sold separately) to dispense the two-part epoxy filler into the injection ports.
Sealant | Filler | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, oz. | Container Type | Container Size, oz. | Container Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Color | For Max. Crack Wd. | Approx. Coverage @ Thick. | Application Temp. Range, °F | Finishing Method | For Use On | Each | |
34 | Jar | 10 | Cartridge | 15 | 24 | Thin Liquid | 1:1 | Light Amber | 1/4" | 8 ft. @ 10" | 50° to 90° | Sand, Tap | Concrete | 00000000 | 000000 |