Container Type Container Type |
---|
![]() | ![]() |
Cartridge | Syringe |
![]() | ![]() |
Jar | Aerosol Can |
For Use On For Use On |
---|
For Joining For Joining |
---|
|
Color Color | Show |
---|
|
Color Color | Hide |
---|
Maximum Temperature Maximum Temperature |
---|
|
Formulation Formulation |
---|
|
Hardness Rating Hardness Rating |
---|
|
Consistency Consistency |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
For Use Outdoors For Use Outdoors |
---|
|
Thermal Conductivity Thermal Conductivity |
---|
|
For Topcoat Composition For Topcoat Composition |
---|
|
More
More
Even when used under water, these adhesives maintain their strength. The most weather- and chemical-resistant structural adhesives, epoxies tend to work especially well on metals.
The size listed is the combined total of the two parts. ClearWeld and Plastic Bonder can be applied to wet surfaces.
Mfr. Model | Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
Plastic Bonder | 50133 | 0.85 | Syringe | 15 min. | 30 min. | 1,700 | 1:1 | Paste | Not Rated to 200° | Tan | Submersible | Plastic | 0000000 | 00000 |
Fix damaged wood or build up and replace missing wood. These two-part fillers are nonshrinking and chemical resistant. At full strength, they can be sanded, painted, and varnished. The size listed is the combined total of the two parts.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Consistency | Begins to Harden, hrs. | Reaches Full Strength, hrs. | Mixing Required | Mix Ratio | Approximate Coverage @ Thick. | Max. Thick. | Temp. Range, °F | Color | Finishing Method | For Use Outdoors | For Use On | Each | |
12 oz. | Jar | Putty | 1 | 8 | Yes | 1:1 | 85 sq. in. @ 1/4" | 3/4" | 0° to 200° | Tan | Drill, Sand, Saw, Tap | Yes | Wood | 000000 | 000000 |
Encase electronic assemblies in a layer of urethane for protection from dust, moisture, chemicals, mechanical shock, and vibration. Urethanes withstand a wide range of temperatures and are the best choice for cold-temperature applications. They have excellent flexibility, good chemical and moisture resistance, and provide good electrical insulation. Use a gun (sold separately) with the included mixer nozzle to dispense.
US2350™ and US2650™ also require a 4:1 plunger (sold separately) to dispense.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
Loctite® Compounds—Hard | |||||||||||
US2650 | 1.7 | Thick Liquid | 5 | 16 | 940 | 0.47 | -85° to 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Tan | 0000000 | 000000 |
Mixing required—resin and hardener come in two separate jars or in a jar and syringe and must be combined before applying. Change the mix ratio of these heat-transfer potting compounds to achieve the right hardness for your application. They're formulated to draw heat away from sensitive electronic components, so they have higher thermal conductivity than standard potting compounds. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.
The size listed is the combined total of the two parts.
Dry Time | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Consistency | Touch, min. | Overall, hrs. | Hardness Rating | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | Heating Requirements to Reach Full Strength | For Use On | Color | Each | |
Jar Compounds | ||||||||||||
12 | Thick Liquid | 30 | 24 | Extra Hard, Medium Hard, Medium Soft, Soft | 450 | 1 | -100° to 450° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Tan | 000000 | 000000 |
24 | Thick Liquid | 30 | 24 | Extra Hard, Medium Hard, Medium Soft, Soft | 450 | 1 | -100° to 450° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Tan | 000000 | 000000 |
Jar and Syringe Compounds | ||||||||||||
1.6 | Thick Liquid | 30 | 26 | Extra Hard, Medium Hard, Medium Soft, Soft | 450 | 1.01 | -100° to 450° | 2 hrs. @ 250° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Tan | 000000 | 00000 |
Get the power of a two-part epoxy primer in an easy-to-use aerosol can. These primers have excellent chemical and corrosion resistance. Spray them on uncoated or rusty metal to extend the life of paint and coatings. The two parts are contained in the same can; after activating, epoxy is usable for up to four days.
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, oz. | Composition | Touch, min. | Overall, hrs. | Approx. Coverage @ Thick. | Max. Temp., °F | For Topcoat Composition | For Use On | Color | Each | |
13 | Solvent Based | 15 | 2 | 8 sq. ft. @ 1 mil | 210° | Solvent Based, Water Based | Aluminum, Steel, Galvanized Steel | Tan | 00000000 | 000000 |