Magnets Epoxies | McMaster-Carr

Clear All

	For Use On For Use On	Show

Magnets

	For Use On For Use On	Hide

Warning: Products have one, but not necessarily all, of the selected characteristics.

	For Joining For Joining

Plastic to Composites

	Container Type Container Type


Cartridge	Syringe	Stick

	Color Color

	Black		Gray
	Off-White		White
	Yellow

	Reaches Full Strength Reaches Full Strength

	Maximum Temperature Maximum Temperature

250° to 299° F

300° to 499° F

500° to 999° F

	Manufacturer Manufacturer

Loctite®

J-B Weld

	Manufacturer Model Name Manufacturer Model Name

	Type Type

Adhesive

	Formulation Formulation

Cyanoacrylate

Epoxy

Urethane

	Begins to Harden Begins to Harden

	Consistency Consistency

Thick Liquid

Paste

Putty

	Cure Type Cure Type

Room Temperature

	Viscosity Viscosity

	Shear Strength Shear Strength

Less than 1,000 lbs./sq. in.

1,000 to 1,999 lbs./sq. in.

2,000 to 2,999 lbs./sq. in.

	Mixing Required Mixing Required

Yes

	Adhesive Type Adhesive Type

Structural

	Elongation Elongation

100%

	Mix Ratio Mix Ratio

1:1

	Manufacturer Model Number Manufacturer Model Number

	Approximate Coverage Approximate Coverage

10 ft. @ 1/8" dia. bead

20 ft. @ 1/8" dia. bead

160 ft. @ 1/8" dia. bead

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

View catalog pages (6)

Forward

How can we improve?

15 Products

About Structural Adhesives

Quick-Set Epoxy Structural Adhesives

For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.

The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

HY4090 is a blend of epoxy and instant-bond adhesive for a balance of strength, cure speed, and temperature resistance.

50132 works especially well on plastics and composites.

Loctite® Adhesives

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
HY4090	1.69	Cartridge	3 min.	7 days	2,420	Not Rated	1:1	Thick Liquid (19,000 cP)	-65° to 300°	Gray	Metal, Plastic, Rubber, Composites, Masonry, Wood	00000000	000000
HY4090	1.69	Cartridge	3 min.	7 days	2,420	Not Rated	1:1	Thick Liquid (19,000 cP)	-65° to 300°	Off-White	Metal, Plastic, Rubber, Composites, Masonry, Wood	00000000	00000
HY4090	13.5	Cartridge	3 min.	7 days	2,420	Not Rated	1:1	Thick Liquid (19,000 cP)	-65° to 300°	Off-White	Metal, Plastic, Rubber, Composites, Masonry, Wood	0000000	000000

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
PlasticWeld	50132	0.85	Syringe	5 min.	60 min.	2,000	Not Rated	1:1	Thick Liquid (9,000 cP)	-20° to 300°	Yellow	Metal, Plastic, Rubber, Composites, Masonry, Wood	000000	00000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Mixer Nozzle for 1.69 fl. oz. Loctite® Cartridges	000000000	00000
Mixer Nozzle for 13.5 fl. oz. Loctite® Cartridges	000000000	0000
Air-Powered Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges	000000000	000000
Dispensing Gun for 1.69 fl. oz. Cartridges	00000000	00000
Dispensing Gun for 13.5 fl. oz. Cartridges	0000000	000000

Epoxy Structural Adhesives

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. For putty adhesives, slice off the required amount, then knead it together to form a moldable adhesive.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Net Weight, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
HighHeat	8297	2	Stick	60 min.	8 hrs.	900	Not Rated	Putty (Not Rated)	-20° to 450°	Gray	Metal, Plastic, Rubber, Composites, Masonry	000000	00000
PlasticWeld	8237	2	Stick	20 min.	24 hrs.	900	Not Rated	Putty (Not Rated)	-20° to 300°	Off-White	Plastic, Rubber, Composites, Masonry	000000	0000

Slow-Set Epoxy Structural Adhesives

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.

The size listed is the combined total of the two parts.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Max. Temperature, °F	For Joining		Each
Original	50165	0.85	Syringe	4 hrs.	24 hrs.	1,800	Not Rated	1:1	Paste (150,000 cP)	550°	Metal, Plastic, Rubber, Composites, Glass, Masonry	000000	00000

Waterproof Epoxy Structural Adhesives

Even when used under water, these adhesives maintain their strength. The most weather- and chemical-resistant structural adhesives, epoxies tend to work especially well on metals.

The size listed is the combined total of the two parts.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	Environment	For Joining		Each
MarineWeld	50172	0.85	Syringe	5 min.	1 hrs.	1,800	Not Rated	1:1	Paste (100,000 cP)	-20° to 300°	White	Salt Spray, Submersible	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	000000	00000

Metal-Reinforced Epoxy Structural Adhesives

These machinable epoxies are mixed with metal so they can be used to repair cracks and threaded holes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. For putty adhesives, slice off the required amount, then knead it together to form a moldable adhesive.

8267 is reinforced with steel, but won't rust.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Net Weight, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
SteelStik	8267	2	Stick	5 min.	60 min.	900	Not Rated	Not Rated	-20° to 300°	Gray	Metal, Rubber, Composites, Masonry	000000	00000

Urethane Structural Adhesives

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

The size listed is the combined total of the two parts.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Plastic Bonder	50139	0.85	Syringe	15 min.	30 min.	1,000	Not Rated	1:1	Thick Liquid (50,000 cP)	-20° to 250°	Black	Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Masonry, Composites, Masonry, Wood	000000	00000