For Use On For Use On | Show |
---|
|
For Use On For Use On | Hide |
---|
For Joining For Joining |
---|
Formulation Formulation |
---|
|
Type Type |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Manufacturer Manufacturer |
---|
|
Container Size Container Size |
---|
|
Consistency Consistency |
---|
|
Adhesive Type Adhesive Type |
---|
|
Cure Type Cure Type |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Manufacturer Model Number Manufacturer Model Number |
---|
|
Shear Strength Shear Strength |
---|
|
Peel Strength Peel Strength |
---|
|
Connection Type Connection Type |
---|
|
Approximate Coverage Approximate Coverage |
---|
|
More
For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
HY4090 is a blend of epoxy and instant-bond adhesive for a balance of strength, cure speed, and temperature resistance.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
HY4090 | 1.69 | Cartridge | 3 min. | 7 days | 2,420 | Not Rated | 1:1 | Thick Liquid (19,000 cP) | -65° to 300° | Gray | Metal, Plastic, Rubber, Composites, Masonry, Wood | 00000000 | 000000 |
HY4090 | 1.69 | Cartridge | 3 min. | 7 days | 2,420 | Not Rated | 1:1 | Thick Liquid (19,000 cP) | -65° to 300° | Off-White | Metal, Plastic, Rubber, Composites, Masonry, Wood | 00000000 | 00000 |
HY4090 | 13.5 | Cartridge | 3 min. | 7 days | 2,420 | Not Rated | 1:1 | Thick Liquid (19,000 cP) | -65° to 300° | Off-White | Metal, Plastic, Rubber, Composites, Masonry, Wood | 0000000 | 000000 |
With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions. Epoxies are the strongest structural adhesives. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
Adhesives | |||||||||||||
1.69 oz. | Cartridge | 30 min. | 24 hrs. | 360 | Not Rated | 2:1 | Thick Liquid (7,000 cP) | -50° to 350° | Amber | Corrosive, Salt Spray, Submersible | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Rubber, Rubber to Composites, Composites | 000000 | 000000 |
1.69 oz. | Cartridge | 40 min. | 24 hrs. | Not Rated | Not Rated | 2:1 | Thick Liquid (10,000 cP) | -65° to 350° | White | Corrosive, Salt Spray, Submersible | Metal, Metal to Plastic, Plastic | 000000 | 00000 |
Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these adhesives. They bond dissimilar materials. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Includes | Each | |
1.69 | Cartridge | 30 min. | 24 hrs. | 360 | Not Rated | 2:1 | Thick Liquid (9,000 cP) | -50° to 350° | Amber | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Rubber, Rubber to Composites, Rubber to Glass, Ceramic, Composites, Glass, Wood, Wood to Glass | __ | 000000 | 000000 |
1.69 | Cartridge | 30 min. | 24 hrs. | 360 | Not Rated | 2:1 | Thick Liquid (9,500 cP) | -50° to 350° | Amber | Plastic | 1:1 and 2:1 Mix Ratio Plungers, Mixer Nozzle, One 2-oz. Bottle of Etching Solution | 0000000 | 000000 |
1.69 | Cartridge | 30 min. | 24 hrs. | 360 | Not Rated | 2:1 | Thick Liquid (9,500 cP) | -50° to 350° | Amber | Plastic | 1:1 and 2:1 Mix Ratio Plungers, Mixer Nozzle, Mixing Stick, Two 4-oz. Bottles of Etching Solution, Two Brushes, Two Mixing Trays | 0000000 | 000000 |
1.69 | Cartridge | 90 min. | 72 hrs. | Not Rated | Not Rated | 1:1 | Thick Liquid (6,000 cP) | -85° to 270° | Amber | Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Ceramic, Composites, Glass, Wood, Wood to Glass | __ | 000000 | 00000 |
48 | Bottle | 30 min. | 24 hrs. | 360 | Not Rated | 2:1 | Thick Liquid (9,000 cP) | -50° to 350° | Amber | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Rubber, Rubber to Composites, Rubber to Glass, Ceramic, Composites, Glass, Wood, Wood to Glass | __ | 000000 | 000000 |