For Use On For Use On | Show |
---|
|
For Use On For Use On | Hide |
---|
For Joining For Joining |
---|
Formulation Formulation |
---|
|
Type Type |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Begins to Harden Begins to Harden |
---|
|
|
|
Cure Type Cure Type |
---|
|
Consistency Consistency |
---|
|
Adhesive Type Adhesive Type |
---|
|
Container Size Container Size |
---|
Manufacturer Model Number Manufacturer Model Number |
---|
Shear Strength Shear Strength |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Peel Strength Peel Strength |
---|
|
Clarity Clarity |
---|
|
Approximate Coverage Approximate Coverage |
---|
|
More
For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP100NS and 3501 are nonsagging, so they won't drip from vertical or overhead surfaces.
HY4090 is a blend of epoxy and instant-bond adhesive for a balance of strength, cure speed, and temperature resistance.
50132 works especially well on plastics and composites.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
3501 | 4 | Tube | 6 min. | 24 hrs. | 2,000 | 10 | 1:1 | Thick Liquid (1,000,000 cP) | -65° to 350° | Gray | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
3501 | 32 | Can | 6 min. | 24 hrs. | 2,000 | 10 | 1:1 | Thick Liquid (1,000,000 cP) | -65° to 350° | Gray | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
HY4090 | 1.69 | Cartridge | 3 min. | 7 days | 2,420 | Not Rated | 1:1 | Thick Liquid (19,000 cP) | -65° to 300° | Gray | Metal, Plastic, Rubber, Composites, Masonry, Wood | 00000000 | 000000 |
HY4090 | 1.69 | Cartridge | 3 min. | 7 days | 2,420 | Not Rated | 1:1 | Thick Liquid (19,000 cP) | -65° to 300° | Off-White | Metal, Plastic, Rubber, Composites, Masonry, Wood | 00000000 | 00000 |
HY4090 | 13.5 | Cartridge | 3 min. | 7 days | 2,420 | Not Rated | 1:1 | Thick Liquid (19,000 cP) | -65° to 300° | Off-White | Metal, Plastic, Rubber, Composites, Masonry, Wood | 0000000 | 000000 |
Mfr. Model | Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
PlasticWeld | 50132 | 0.85 | Syringe | 5 min. | 60 min. | 2,000 | Not Rated | 1:1 | Thick Liquid (9,000 cP) | -20° to 300° | Off-White | Metal, Plastic, Rubber, Composites, Masonry, Wood | 000000 | 00000 |
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Pkg. Qty. | Pkg. | |
0.1 | One-Time-Use Packet | 3 min. | 24 hrs. | 3,000 | 1 | 1:1 | Thick Liquid (40,000 cP) | 15° to 180° | Amber | Metal, Plastic, Rubber, Masonry | 10 | 0000000 | 000000 |
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives. For putty adhesives, slice off the required amount, then knead it together to form a moldable adhesive.
DP110, 14310, 14260, and 305-1/2 bond dissimilar materials.
305-1/2 and 310A/B are solvent-free.
Epoxy in 5-oz. tubes is solvent-free. It can be softened in warm water if the contents of the tube have hardened.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
1838 | 3.6 | Tube | 60 min. | 7 days | 2,000 | 4 | 4:5 | Paste (492,500 cP) | -65° to 350° | Green | Metal, Plastic, Rubber, Composites, Glass, Wood | 00000000 | 000000 |
1838 | 28.8 | Can | 60 min. | 7 days | 2,000 | 4 | 4:5 | Paste (492,500 cP) | -65° to 350° | Green | Metal, Plastic, Rubber, Composites, Glass, Wood | 0000000 | 000000 |
1838 | 57.6 | Can | 60 min. | 7 days | 2,000 | 4 | 4:5 | Paste (492,500 cP) | -65° to 350° | Green | Metal, Plastic, Rubber, Composites, Glass, Wood | 00000000 | 000000 |
1838L | 4 | Tube | 60 min. | 7 days | 2,000 | 4 | 1:1 | Thick Liquid (11,000 cP) | -65° to 350° | Clear | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 00000 |
1838L | 64 | Can | 60 min. | 7 days | 2,000 | 4 | 1:1 | Thick Liquid (11,000 cP) | -65° to 350° | Clear | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
305-1/2 | 1.69 | Cartridge | 60 min. | 48 hrs. | 2,240 | 84 | 1:1 | Thick Liquid (23,250 cP) | -30° to 250° | Blue | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Rubber, Rubber to Composites, Rubber to Glass, Composites, Glass, Wood, Wood to Glass | 00000000 | 000000 |
Mfr. Model | Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
HighHeat | 8297 | 2 | Stick | 60 min. | 8 hrs. | 900 | Not Rated | Putty (Not Rated) | -20° to 450° | Gray | Metal, Plastic, Rubber, Composites, Masonry | 000000 | 00000 |
PlasticWeld | 8237 | 2 | Stick | 20 min. | 24 hrs. | 900 | Not Rated | Putty (Not Rated) | -20° to 300° | Off-White | Plastic, Rubber, Composites, Masonry | 000000 | 0000 |
Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
5 | Tube | 20 min. | 24 hrs. | 2,500 | Not Rated | 2:1 | Paste (Not Rated) | -65° to 260° | Clear | Metal, Plastic, Rubber | 0000000 | 000000 |
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts.
2158 bonds to damp concrete.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Specifications Met | For Joining | Each | |
2158 | 32 oz. | Can | 2 hrs. | 7 days | 2,000 | 3 | 1:1 | Paste (425,000 cP) | -65° to 350° | __ | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 0000000 |
2158 | 64 oz. | Can | 2 hrs. | 7 days | 2,000 | 3 | 1:1 | Paste (425,000 cP) | -65° to 350° | __ | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
2216 | 1.66 gal. | Can | 90 min. | 7 days | 1,700 | 25 | 2:3 | Thick Liquid (81,000 cP) | -65° to 350° | DOD-A-82720 | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
2216 | 3.3 oz. | Tube | 90 min. | 7 days | 1,700 | 25 | 2:3 | Thick Liquid (81,000 cP) | -65° to 350° | DOD-A-82720 | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 00000 |
2216 | 4 oz. | Tube | 2 hrs. | 30 days | 3,000 | 25 | 1:1 | Thick Liquid (10,000 cP) | -65° to 350° | __ | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 00000 |
2216 | 26.6 oz. | Can | 90 min. | 7 days | 1,700 | 25 | 2:3 | Thick Liquid (81,000 cP) | -65° to 350° | DOD-A-82720 | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
2216 | 32 oz. | Can | 2 hrs. | 30 days | 3,000 | 25 | 1:1 | Thick Liquid (10,000 cP) | -65° to 350° | __ | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
2216 | 53.3 oz. | Can | 90 min. | 7 days | 1,700 | 25 | 2:3 | Thick Liquid (81,000 cP) | -65° to 350° | DOD-A-82720 | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
2216 | 64 oz. | Can | 2 hrs. | 30 days | 3,000 | 25 | 1:1 | Thick Liquid (10,000 cP) | -65° to 350° | __ | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 0000000 | 000000 |
Mfr. Model | Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | For Joining | Each | |
Original | 50165 | 0.85 | Syringe | 4 hrs. | 24 hrs. | 1,800 | Not Rated | 1:1 | Paste (150,000 cP) | Not Rated to 550° | Metal, Plastic, Rubber, Composites, Glass, Masonry | 000000 | 00000 |
Container | Strength | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | For Joining | Each | |
8 | Bottle | 2 hrs. | 24 hrs. | 3,280 | Not Rated | 1:1 | Thick Liquid (30,000 cP) | -25° to 200° | Metal, Plastic, Rubber, Glass, Masonry | 0000000 | 000000 |
8 | Bottle | 3 hrs. | 24 hrs. | 2,800 | 24 | 1:1 | Thick Liquid (50,000 cP) | -65° to 250° | Metal, Plastic, Rubber, Glass, Masonry | 0000000 | 00000 |
32 | Bottle | 2 hrs. | 24 hrs. | 3,280 | Not Rated | 1:1 | Thick Liquid (30,000 cP) | -25° to 200° | Metal, Plastic, Rubber, Glass, Masonry | 0000000 | 00000 |
32 | Bottle | 3 hrs. | 24 hrs. | 2,800 | 24 | 1:1 | Thick Liquid (50,000 cP) | -65° to 250° | Metal, Plastic, Rubber, Glass, Masonry | 0000000 | 00000 |
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Pkg. Qty. | Pkg. | |
0.1 | One-Time-Use Packet | 2 hrs. | 24 hrs. | 3,280 | Not Rated | 1:1 | Thick Liquid (30,000 cP) | -25° to 200° | Amber | Metal, Plastic, Rubber, Glass, Masonry | 10 | 0000000 | 000000 |
0.1 | One-Time-Use Packet | 3 hrs. | 24 hrs. | 2,800 | 24 | 1:1 | Thick Liquid (50,000 cP) | -65° to 250° | Gray | Metal, Plastic, Rubber, Glass, Masonry | 10 | 0000000 | 00000 |
Even when used under water, these adhesives maintain their strength. The most weather- and chemical-resistant structural adhesives, epoxies tend to work especially well on metals.
The size listed is the combined total of the two parts.
Mfr. Model | Container | Strength | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
MarineWeld | 50172 | 0.85 | Syringe | 5 min. | 1 hrs. | 1,800 | Not Rated | 1:1 | Paste (100,000 cP) | -20° to 300° | White | Salt Spray, Submersible | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 000000 | 00000 |
With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions. Epoxies are the strongest structural adhesives. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
Adhesives | |||||||||||||
1.69 oz. | Cartridge | 30 min. | 24 hrs. | 360 | Not Rated | 2:1 | Thick Liquid (7,000 cP) | -50° to 350° | Amber | Corrosive, Salt Spray, Submersible | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Rubber, Rubber to Composites, Composites | 000000 | 000000 |
Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these adhesives. They bond dissimilar materials. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
1.69 | Cartridge | 30 min. | 24 hrs. | 360 | Not Rated | 2:1 | Thick Liquid (9,000 cP) | -50° to 350° | Amber | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Rubber, Rubber to Composites, Rubber to Glass, Ceramic, Composites, Glass, Wood, Wood to Glass | 000000 | 000000 |
48 | Bottle | 30 min. | 24 hrs. | 360 | Not Rated | 2:1 | Thick Liquid (9,000 cP) | -50° to 350° | Amber | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Rubber, Rubber to Composites, Rubber to Glass, Ceramic, Composites, Glass, Wood, Wood to Glass | 000000 | 000000 |
These machinable epoxies are mixed with metal so they can be used to repair cracks and threaded holes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts. For putty adhesives, slice off the required amount, then knead it together to form a moldable adhesive.
1751 and epoxy in 11-oz. tubes are reinforced with aluminum.
8267 is reinforced with steel, but won't rust.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
1751 | 3.3 | Tube | 45 min. | 7 days | 2,000 | 4 | 3:2 | Paste (700,000 cP) | -65° to 350° | Gray | Metal, Plastic, Rubber, Composites, Glass, Wood | 00000000 | 000000 |
1751 | 26.6 | Can | 45 min. | 7 days | 2,000 | 4 | 3:2 | Paste (700,000 cP) | -65° to 350° | Gray | Metal, Plastic, Rubber, Composites, Glass, Wood | 00000000 | 000000 |
1751 | 53.3 | Can | 45 min. | 7 days | 2,000 | 4 | 3:2 | Paste (700,000 cP) | -65° to 350° | Gray | Metal, Plastic, Rubber, Composites, Glass, Wood | 00000000 | 000000 |
Mfr. Model | Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
SteelStik | 8267 | 2 | Stick | 5 min. | 60 min. | 900 | Not Rated | Not Rated | -20° to 300° | Gray | Metal, Rubber, Composites, Masonry | 000000 | 00000 |
Bond most materials without the strong odor of other epoxy adhesives. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts.
Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Adhesives | ||||||||||||
1.65 | Syringe | 4 min. | 24 hrs. | 2,200 | 18 | 1:1 | Thick Liquid (15,000 cP) | -45° to 250° | Amber | Metal, Plastic, Rubber, Wood | 0000000 | 000000 |
Easily handle a variety of small jobs. Assortments include eight different epoxies in 0.1-oz. packets. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
Epoxy Type (For Joining) | Each | |
Easy Flowing (Composites, Metal) Fast Hardening (Masonry, Metal, Rubber) For Vertical Surfaces (Masonry, Metal, Wood) General Purpose (Masonry, Metal, Plastic, Rubber) High Strength (Metal, Rubber) Machinable Surface Filler (Composites, Metal) Optically Clear (Glass, Metal) Water Resistant (Composites, Masonry, Metal) | 0000000 | 000000 |
Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.
The size listed is the combined total of the two parts. Use 1.69-oz. cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
7150A/B | 1.69 | Cartridge | 5 min. | 24 hrs. | 1,400 | 40 | 2:1 | Thick Liquid (38,830 cP) | -30° to 240° | Gray | Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Composites, Glass, Wood, Wood to Glass | 00000000 | 000000 |
7542A/B | 1.69 | Cartridge | 4 min. | 24 hrs. | 1,800 | 50 | 1:1 | Thick Liquid (6,750 cP) | -30° to 240° | Brown | Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Composites, Glass, Wood, Wood to Glass | 00000000 | 00000 |
Mfr. Model | Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Plastic Bonder | 50139 | 0.85 | Syringe | 15 min. | 30 min. | 1,000 | Not Rated | 1:1 | Thick Liquid (50,000 cP) | -20° to 250° | Black | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Masonry, Composites, Masonry, Wood | 000000 | 00000 |
Bond and repair nosing and stair treads with this thick two-part epoxy. The size listed is the combined total of the two parts.
Container | Strength | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear | Peel | Mix Ratio | Consistency | Temp. Range, °F | Color | For Use Outdoors | For Joining | Each | |
32 | Can | 75 ft. @ 1/4" bead | 45 min. | 24 hrs. | Not Rated | Not Rated | 1:1 | Paste | 70° to 80° | Beige | No | Masonry, Plastic, Rubber | 00000000 | 000000 |
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
Lg. | Wd. | Begins to Harden, min. | Reaches Full Strength, hrs. | Mix Ratio | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Surface Fillers | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
2" | 12" | 1 | 24 | 1:1 | Yes | -85° to 220° | Red | Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood | 00000000 | 000000 |
2" | 20" | 1 | 24 | 1:1 | Yes | -85° to 220° | Amber | Machine, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood | 00000000 | 00000 |
4" | 6" | 1 | 24 | 1:1 | Yes | -85° to 220° | Blue | Machine, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood | 00000000 | 00000 |
4" | 12" | 1 | 24 | 1:1 | Yes | -85° to 220° | Green | Machine, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood | 00000000 | 00000 |
An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. When exposed to sunlight or a UV lamp, they begin to harden immediately. Patches are waterproof.
Formulation | Lg. | Wd. | Begins to Harden, sec. | Reaches Full Strength, min. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Polyester | 6" | 3" | 1 | 50 | Yes | -40° to 350° | Yellow | Drill, Sand | Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Concrete | 0000000 | 00000 |
Use these two-part fillers to rebuild cracked or worn plastic surfaces. The size listed is the combined total of the two parts.
Devcon Flexane 80 Putty can be used with vinyl plastic and rubber.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Devcon Flexane 80 Putty | |||||||||||||
15820 | 1 lbs. | Can | 20 min. | 7 days | Putty | 2.6:1 | 90 sq. in. @ 1/4" | -40° to 180° | Black | Sand | Vinyl Plastic, EPDM Rubber, SBR Rubber | 00000000 | 000000 |