Vinyl Plastic Epoxies | McMaster-Carr

Clear All

	Epoxy Type Epoxy Type

Easy Flowing

Fast Hardening

For Vertical Surfaces

General Purpose

High Strength

Machinable Surface Filler

Optically Clear

Water Resistant

	For Joining For Joining

Plastic to Composites

	For Use On For Use On	Show

Vinyl Plastic

	For Use On For Use On	Hide

Warning: Products have one, but not necessarily all, of the selected characteristics.

	Begins to Harden Begins to Harden

	Color Color

	Aluminum		Amber
	Beige		Black
	Blue		Brown
	Clear		Gray
	Green		Red
	White		Yellow

	Reaches Full Strength Reaches Full Strength

	Maximum Temperature Maximum Temperature

Less than 250° F

250° to 299° F

300° to 499° F

	Minimum Temperature Minimum Temperature

	Mix Ratio Mix Ratio

	Type Type

Adhesive

Surface Filler

	Formulation Formulation

Epoxy

Polyester

Urethane

	Cure Type Cure Type

Room Temperature

	Adhesive Type Adhesive Type

Structural

Construction

Flooring

	Container Type Container Type


Cartridge	Single-Use Packet

Syringe	Tube

Can	Bottle

Jar	Patch

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

	Mixing Required Mixing Required

Yes

	Container Size Container Size

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Approximate Coverage Approximate Coverage

1 ft. @ 1/8" dia. bead

20 ft. @ 1/8" dia. bead

35 ft. @ 1/8" dia. bead

45 ft. @ 1/8" dia. bead

55 ft. @ 1/8" dia. bead

95 ft. @ 1/8" dia. bead

315 ft. @ 1/8" dia. bead

340 ft. @ 1/8" dia. bead

375 ft. @ 1/8" dia. bead

565 ft. @ 1/8" dia. bead

630 ft. @ 1/8" dia. bead

680 ft. @ 1/8" dia. bead

755 ft. @ 1/8" dia. bead

2,520 ft. @ 1/8" dia. bead

75 ft. @ 1/4" bead

	Manufacturer Model Number Manufacturer Model Number

	Manufacturer Manufacturer

Devcon

Lord

	Consistency Consistency

Thick Liquid

Paste

Putty

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

View catalog pages (14)

Forward

How can we improve?

51 Products

About Structural Adhesives

Quick-Set Epoxy Structural Adhesives

For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.

The size listed is the combined total of the two parts.

DP100NS and 3501 are nonsagging, so they won't drip from vertical or overhead surfaces.

3M Scotch-Weld Adhesives

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
3501	4	Tube	6 min.	24 hrs.	2,000	10	1:1	Thick Liquid (1,000,000 cP)	-65° to 350°	Gray	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	00000000	000000
3501	32	Can	6 min.	24 hrs.	2,000	10	1:1	Thick Liquid (1,000,000 cP)	-65° to 350°	Gray	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	00000000	000000

Adhesives with Ten Mixing Sticks

Container				Strength
Net Weight, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining	Pkg. Qty.		Pkg.
0.1	One-Time-Use Packet	3 min.	24 hrs.	3,000	1	1:1	Thick Liquid (40,000 cP)	15° to 180°	Amber	Metal, Plastic, Rubber, Masonry	10	0000000	000000

Epoxy Structural Adhesive Assortments

Easily handle a variety of small jobs. Assortments include eight different epoxies in 0.1-oz. packets. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.

Epoxy Type (For Joining)		Each
Easy Flowing (Composites, Metal) Fast Hardening (Masonry, Metal, Rubber) For Vertical Surfaces (Masonry, Metal, Wood) General Purpose (Masonry, Metal, Plastic, Rubber) High Strength (Metal, Rubber) Machinable Surface Filler (Composites, Metal) Optically Clear (Glass, Metal) Water Resistant (Composites, Masonry, Metal)	0000000	000000

Epoxy Structural Adhesives

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

DP110, 14310, 14260, and 305-1/2 bond dissimilar materials.

305-1/2 and 310A/B are solvent-free.

Epoxy in 5-oz. tubes is solvent-free. It can be softened in warm water if the contents of the tube have hardened.

3M Scotch-Weld Adhesives

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
1838	28.8	Can	60 min.	7 days	2,000	4	4:5	Paste (492,500 cP)	-65° to 350°	Green	Metal, Plastic, Rubber, Composites, Glass, Wood	0000000	0000000
1838	57.6	Can	60 min.	7 days	2,000	4	4:5	Paste (492,500 cP)	-65° to 350°	Green	Metal, Plastic, Rubber, Composites, Glass, Wood	00000000	000000
1838L	4	Tube	60 min.	7 days	2,000	4	1:1	Thick Liquid (11,000 cP)	-65° to 350°	Clear	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	00000000	00000
1838L	64	Can	60 min.	7 days	2,000	4	1:1	Thick Liquid (11,000 cP)	-65° to 350°	Clear	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	00000000	000000

Lord Adhesives with Mixer Nozzles

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
305-1/2	1.69	Cartridge	60 min.	48 hrs.	2,240	84	1:1	Thick Liquid (23,250 cP)	-30° to 250°	Blue	Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Rubber, Rubber to Composites, Rubber to Glass, Composites, Glass, Wood, Wood to Glass	00000000	000000

Adhesives

Container				Strength
Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
5	Tube	20 min.	24 hrs.	2,500	Not Rated	2:1	Paste (Not Rated)	-65° to 260°	Clear	Metal, Plastic, Rubber	0000000	000000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Mixer Nozzle for 1.69 fl. oz. Cartridges	00000000	00000
Dispensing Gun for 1.69 fl. oz. Cartridges	00000000	00000

Slow-Set Epoxy Structural Adhesives

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.

The size listed is the combined total of the two parts.

2158 bonds to damp concrete.

3M Scotch-Weld Adhesives

	Container				Strength
Mfr. Model No.	Size	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Specifications Met	For Joining		Each
2158	32 fl. oz.	Can	2 hrs.	7 days	2,000	3	1:1	Paste (425,000 cP)	-65° to 350°	__	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	00000000	0000000
2158	64 fl. oz.	Can	2 hrs.	7 days	2,000	3	1:1	Paste (425,000 cP)	-65° to 350°	__	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	00000000	000000
2216	1.66 gal.	Can	90 min.	7 days	1,700	25	2:3	Thick Liquid (81,000 cP)	-65° to 350°	DOD-A-82720	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	00000000	00000000
2216	3.3 fl. oz.	Tube	90 min.	7 days	1,700	25	2:3	Thick Liquid (81,000 cP)	-65° to 350°	DOD-A-82720	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	00000000	00000
2216	4 fl. oz.	Tube	2 hrs.	30 days	3,000	25	1:1	Thick Liquid (10,000 cP)	-65° to 350°	__	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	00000000	00000
2216	26.6 fl. oz.	Can	90 min.	7 days	1,700	25	2:3	Thick Liquid (81,000 cP)	-65° to 350°	DOD-A-82720	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	00000000	000000
2216	32 fl. oz.	Can	2 hrs.	30 days	3,000	25	1:1	Thick Liquid (10,000 cP)	-65° to 350°	__	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	00000000	000000
2216	53.3 fl. oz.	Can	90 min.	7 days	1,700	25	2:3	Thick Liquid (81,000 cP)	-65° to 350°	DOD-A-82720	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	00000000	000000
2216	64 fl. oz.	Can	2 hrs.	30 days	3,000	25	1:1	Thick Liquid (10,000 cP)	-65° to 350°	__	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	0000000	000000

Adhesives

Container				Strength
Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	For Joining		Each
8	Bottle	2 hrs.	24 hrs.	3,280	Not Rated	1:1	Thick Liquid (30,000 cP)	-25° to 200°	Metal, Plastic, Rubber, Glass, Masonry	0000000	000000
8	Bottle	3 hrs.	24 hrs.	2,800	24	1:1	Thick Liquid (50,000 cP)	-65° to 250°	Metal, Plastic, Rubber, Glass, Masonry	0000000	00000
32	Bottle	2 hrs.	24 hrs.	3,280	Not Rated	1:1	Thick Liquid (30,000 cP)	-25° to 200°	Metal, Plastic, Rubber, Glass, Masonry	0000000	00000
32	Bottle	3 hrs.	24 hrs.	2,800	24	1:1	Thick Liquid (50,000 cP)	-65° to 250°	Metal, Plastic, Rubber, Glass, Masonry	0000000	00000

Adhesives with Ten Mixing Sticks

Container				Strength
Net Weight, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining	Pkg. Qty.		Pkg.
0.1	One-Time-Use Packet	2 hrs.	24 hrs.	3,280	Not Rated	1:1	Thick Liquid (30,000 cP)	-25° to 200°	Amber	Metal, Plastic, Rubber, Glass, Masonry	10	0000000	000000
0.1	One-Time-Use Packet	3 hrs.	24 hrs.	2,800	24	1:1	Thick Liquid (50,000 cP)	-65° to 250°	Gray	Metal, Plastic, Rubber, Glass, Masonry	10	0000000	00000

Epoxy Structural Adhesives for Harsh Environments

With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions. Epoxies are the strongest structural adhesives. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.

The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

Container				Strength
Size	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	Environment	For Joining		Each
Adhesives
1.69 fl. oz.	Cartridge	30 min.	24 hrs.	360	Not Rated	2:1	Thick Liquid (7,000 cP)	-50° to 350°	Amber	Corrosive, Salt Spray, Submersible	Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Rubber, Rubber to Composites, Composites	000000	000000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Mixer Nozzle for 1.69 fl. oz. Cartridges	00000000	00000
Dispensing Gun for 1.69 fl. oz. Cartridges	00000000	00000

Metal-Reinforced Epoxy Structural Adhesives

These machinable epoxies are mixed with metal so they can be used to repair cracks and threaded holes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.

The size listed is the combined total of the two parts.

1751 and epoxy in 11 fl. oz. tubes are reinforced with aluminum.

3M Scotch-Weld Adhesives

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
1751	3.3	Tube	45 min.	7 days	2,000	4	3:2	Paste (700,000 cP)	-65° to 350°	Gray	Metal, Plastic, Rubber, Composites, Glass, Wood	00000000	000000
1751	26.6	Can	45 min.	7 days	2,000	4	3:2	Paste (700,000 cP)	-65° to 350°	Gray	Metal, Plastic, Rubber, Composites, Glass, Wood	00000000	000000

Epoxy Structural Adhesives for Hard-to-Bond Materials

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these adhesives. They bond dissimilar materials. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.

The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

Container				Strength
Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining	Includes		Each
1.69	Cartridge	30 min.	24 hrs.	360	Not Rated	2:1	Thick Liquid (9,000 cP)	-50° to 350°	Amber	Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Rubber, Rubber to Composites, Rubber to Glass, Ceramic, Composites, Glass, Wood, Wood to Glass	__	000000	000000
1.69	Cartridge	30 min.	24 hrs.	360	Not Rated	2:1	Thick Liquid (9,500 cP)	-50° to 350°	Amber	Plastic	1:1 and 2:1 Mix Ratio Plungers, Mixer Nozzle, One 2-oz. Bottle of Etching Solution	0000000	000000
1.69	Cartridge	30 min.	24 hrs.	360	Not Rated	2:1	Thick Liquid (9,500 cP)	-50° to 350°	Amber	Plastic	1:1 and 2:1 Mix Ratio Plungers, Mixer Nozzle, Mixing Stick, Two 4-oz. Bottles of Etching Solution, Two Brushes, Two Mixing Trays	0000000	000000
48	Bottle	30 min.	24 hrs.	360	Not Rated	2:1	Thick Liquid (9,000 cP)	-50° to 350°	Amber	Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Rubber, Rubber to Composites, Rubber to Glass, Ceramic, Composites, Glass, Wood, Wood to Glass	__	000000	000000

Mixer Nozzle for 1.69 fl. oz. Cartridges	00000000	Each	00000
Dispensing Gun for 1.69 fl. oz. Cartridges	00000000	Each	00000

Low-Odor Epoxy Structural Adhesives

Bond most materials without the strong odor of other epoxy adhesives. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.

The size listed is the combined total of the two parts.

Container				Strength
Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Adhesives
1.65	Syringe	4 min.	24 hrs.	2,200	18	1:1	Thick Liquid (15,000 cP)	-45° to 250°	Amber	Metal, Plastic, Rubber, Wood	0000000	000000

Urethane Structural Adhesives

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

The size listed is the combined total of the two parts. Use 1.64 fl. oz. and 1.69 fl. oz. cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

Lord Adhesives with Mixer Nozzle

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
7150A/B	1.69	Cartridge	5 min.	24 hrs.	1,400	40	2:1	Thick Liquid (38,830 cP)	-30° to 240°	Gray	Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Composites, Glass, Wood, Wood to Glass	00000000	000000
7542A/B	1.69	Cartridge	4 min.	24 hrs.	1,800	50	1:1	Thick Liquid (6,750 cP)	-30° to 240°	Brown	Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Composites, Glass, Wood, Wood to Glass	00000000	00000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Mixer Nozzle for 1.69 fl. oz. Cartridges	00000000	00000
Dispensing Gun for 1.69 fl. oz. Cartridges	00000000	00000

Construction Adhesives for Nosing

Bond and repair nosing and stair treads with this thick two-part epoxy. The size listed is the combined total of the two parts.

Container					Strength
Size, fl. oz.	Type	Approximate Coverage	Begins to Harden	Reaches Full Strength	Shear	Peel	Mix Ratio	Consistency	Temp. Range, °F	Color	For Use Outdoors	For Joining		Each
32	Can	75 ft. @ 1/4" bead	45 min.	24 hrs.	Not Rated	Not Rated	1:1	Paste	70° to 80°	Beige	No	Masonry, Plastic, Rubber	00000000	000000

Surface Filler Patches

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

Surface Fillers
Lg.	Wd.	Begins to Harden, min.	Reaches Full Strength, hrs.	Mix Ratio	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
2"	12"	1	24	1:1	Yes	-85° to 220°	Red	Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	000000
2"	20"	1	24	1:1	Yes	-85° to 220°	Amber	Machine, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	00000
4"	6"	1	24	1:1	Yes	-85° to 220°	Blue	Machine, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	00000
4"	12"	1	24	1:1	Yes	-85° to 220°	Green	Machine, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	00000

Light-Activated Surface Filler Patches

An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. When exposed to sunlight or a UV lamp, they begin to harden immediately. Patches are waterproof.

Formulation	Lg.	Wd.	Begins to Harden, sec.	Reaches Full Strength, min.	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Polyester	6"	3"	1	50	Yes	-40° to 350°	Yellow	Drill, Sand	Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Concrete	0000000	000000

Water-Resistant Surface Fillers

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.

Paste fillers resist alkalies, solvents, gasoline, and oil.

Container
Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Max. Thick.	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Surface Fillers
2	Tube	5	24 hrs.	Paste	1:1	12 sq. in. @ 1/4"	1/2"	Not Rated to 200°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	000000
2	Jar, Bottle	20	60 min.	Paste	5:1	8 1/2 sq. in. @ 1/4"	1 1/2"	Not Rated to 185°	White	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000
2	Jar, Bottle	20	60 min.	Paste	5:1	8 1/2 sq. in. @ 1/4"	1 1/2"	Not Rated to 250°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000
14	Can, Jar	20	60 min.	Paste	5:1	62 sq. in. @ 1/4"	1 1/2"	Not Rated to 185°	White	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000
14	Can, Jar	20	60 min.	Paste	5:1	62 sq. in. @ 1/4"	1 1/2"	Not Rated to 250°	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood	0000000	00000

Fuel-Resistant Surface Fillers

Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.

1.5-pint container can treat a 10-gallon fuel tank. 3-pint container can treat a 20-gallon fuel tank.

Container
Size, pt.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
1.5	Can	5	24	Thick Liquid	2:1	No	70° to 90°	Amber	Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain	0000000	000000
3	Can	5	24	Thick Liquid	2:1	No	70° to 90°	Amber	Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain	0000000	00000

Surface Fillers for Plastic

Use these two-part fillers to rebuild cracked or worn plastic surfaces. The size listed is the combined total of the two parts.

Devcon Flexane 80 Putty can be used with vinyl plastic and rubber.

	Container
Mfr. Model No.	Net Weight	Type	Begins to Harden	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Devcon Flexane 80 Putty
15820	1 lbs.	Can	20 min.	7 days	Putty	2.6:1	90 sq. in. @ 1/4"	-40° to 180°	Black	Sand	Vinyl Plastic, EPDM Rubber, SBR Rubber	00000000	0000000