Filter by
Manufacturer
Maximum Temperature
Manufacturer Model Number
Type
Mix Ratio
Reaches Full Strength
Formulation
Consistency
Color
DFARS Specialty Metals
Export Control Classification Number (ECCN)
RoHS
Clarity
Minimum Temperature
Approximate Coverage @ Thickness
Mixing Required
For Use Outdoors
Manufacturer Model Name
Begins to Harden
Fine-Particle Abrasion-Resistant Surface Fillers for Metal



For use in processing equipment that carries particles smaller than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings. The size listed is the combined total of the two parts.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Weight, lbs. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Nordbak Pneu-Wear | |||||||||||||||
PC 7317 | 3 | Can | 30 | 6 | Paste | 4:1 | 150 sq. in. @ 1/4" | 1/4" | Yes | -20° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 0000000 |
PC 7317 | 25 | Pail, Can | 30 | 6 | Paste | 4:1 | 1,240 sq. in. @ 1/4" | 1/4" | Yes | -20° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 000000 |