For quick repairs, these epoxies begin to harden in 6 minutes or less.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

For invisible bond lines, these adhesives dry clear.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.

With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.

These self-extinguishing epoxies meet UL 94 V-0 for flame retardance.

Bond and repair nosing and stair treads with this thick, two-part epoxy.

These kits include adhesives, applicators, and mixer nozzles.

Bond new concrete to old concrete, or use this adhesive as a primer on concrete surfaces.

Secure hardware on circuit boards while insulating current.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces.

A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.

To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi.

Make castings and fill voids with these two-part pourable epoxies.

Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.

Everything you need to repair cracked, worn, and damaged surfaces—even underwater.

Fill cracks in horizontal, vertical, and overhead concrete surfaces.

Patch concrete floors and stairs with these compounds.

Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.

These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel wheels and heavy impacts.

Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.

Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds.

Tested to meet ASTM E595, a standard used by NASA, these potting compounds release almost no volatile emissions that could damage sensitive electronics, even in a vacuum. Use them to draw heat away from your components—they conduct heat better than standard potting compounds.

Protect circuit boards and other electronics from fire and heat.

Protect circuit boards and other electronics where high heat is a concern but you don’t need to transfer that heat elsewhere. These compounds are a good middle ground between standard epoxy compounds and heat-transfer compounds.

Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics.

This coating is formulated for use in sensitive applications such as manufacturing semiconductors.

Coat electronics for durability in tough conditions while blocking EMI/RFI signals.

Prevent the growth of harmful and odor-causing bacteria, mold, and fungus on HVAC system components and hardware. These coatings contain silver, which inhibits the growth of mildew, mold, and fungus.

These coatings are more durable than our standard coatings for concrete floors. They provide a stain-resistant finish that protects your floors from moisture, chemicals, foot traffic, and hand carts.

Extend the life of your footwear with these abrasion- and water-resistant epoxies.