Epoxy Packets | McMaster-Carr

	Epoxy Type Epoxy Type

For Vertical Surfaces

General Purpose

Machinable Surface Filler

Optically Clear

Water Resistant

	For Use On For Use On

	For Joining For Joining

	Color Color

	Amber		Clear
	White		Gray
	Aluminum		Blue
	Red		Brown
	Green		Silver

	Begins to Harden Begins to Harden

	Reaches Full Strength Reaches Full Strength

	Maximum Temperature Maximum Temperature

	Container Type Container Type


Single-Use Packet	Patch

	Mix Ratio Mix Ratio

	Type Type

	Formulation Formulation

	Minimum Temperature Minimum Temperature

	Adhesive Type Adhesive Type

	Mixing Required Mixing Required

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

	Container Size Container Size

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Approximate Coverage Approximate Coverage

1 ft. @ 1/8" dia. bead

1.5 ft. @ 1/8" dia. bead

	Consistency Consistency

	Clarity Clarity

	Shear Strength Shear Strength

2,200 lbs./sq. in.

2,400 lbs./sq. in.

2,800 lbs./sq. in.

2,900 lbs./sq. in.

2,980 lbs./sq. in.

3,000 lbs./sq. in.

3,280 lbs./sq. in.

3,710 lbs./sq. in.

	Viscosity Viscosity

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

How can we improve?

19 Products

About Structural Adhesives

More

Epoxy Structural Adhesive Assortments

Easily handle a variety of small jobs. Assortments include eight different epoxies in 0.1-oz. packets. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.

Epoxy Type (For Joining)		Each
Easy Flowing (Composites, Metal) Fast Hardening (Masonry, Metal, Rubber) For Vertical Surfaces (Masonry, Metal, Wood) General Purpose (Masonry, Metal, Plastic, Rubber) High Strength (Metal, Rubber) Machinable Surface Filler (Composites, Metal) Optically Clear (Glass, Metal) Water Resistant (Composites, Masonry, Metal)	0000000	000000

Quick-Set Epoxy Structural Adhesives

For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.

The size listed is the combined total of the two parts.

Adhesives with Ten Mixing Sticks

Container				Strength
Net Weight, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining	Pkg. Qty.		Pkg.
0.1	One-Time-Use Packet	3 min.	24 hrs.	3,000	1	1:1	Thick Liquid (40,000 cP)	15° to 180°	Amber	Metal, Plastic, Rubber, Masonry	10	0000000	000000
0.1	One-Time-Use Packet	3 min.	24 hrs.	3,710	2	1:1	Paste (400,000 cP)	15° to 180°	White	Metal, Masonry, Wood	10	0000000	00000

Optically Clear Epoxy Structural Adhesives

For invisible bond lines, these adhesives dry clear. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. Choose an epoxy that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.

The size listed is the combined total of the two parts.

Adhesives with Ten Mixing Sticks

	Container				Strength
Mfr. Model No.	Net Weight, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	For Joining	Pkg. Qty.		Pkg.
Loctite® Adhesives
608	0.14	One-Time-Use Packet	5 min.	24 hrs.	2,980	Not Rated	1:1	Paste (100,000 cP)	-65° to 130°	Metal, Plastic, Rubber	10	00000000	000000
Adhesives
__	0.1	One-Time-Use Packet	60 min.	7 days	2,400	Not Rated	1.61:1	Thick Liquid (14,000 cP)	0° to 180°	Metal, Glass	10	0000000	00000

Waterproof Epoxy Structural Adhesives

Even when used under water, these adhesives maintain their strength. The most weather- and chemical-resistant structural adhesives, epoxies tend to work especially well on metals.

The size listed is the combined total of the two parts.

WaterWeld and 11801, as well as one-time-use packets, can be applied to wet surfaces or under water.

Adhesives with Ten Mixing Sticks

Container				Strength
Net Weight, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	Environment	For Joining	Pkg. Qty.		Pkg.
0.1	One-Time-Use Packet	25 min.	7 days	2,200	Not Rated	2.5:1	Thick Liquid (40,000 cP)	0° to 220°	Gray	Salt Spray, Submersible	Metal, Composites, Masonry	10	0000000	000000

Slow-Set Epoxy Structural Adhesives

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.

The size listed is the combined total of the two parts.

Adhesives with Ten Mixing Sticks

Container				Strength
Net Weight, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining	Pkg. Qty.		Pkg.
0.1	One-Time-Use Packet	2 hrs.	24 hrs.	3,280	Not Rated	1:1	Thick Liquid (30,000 cP)	-25° to 200°	Amber	Metal, Plastic, Rubber, Glass, Masonry	10	0000000	000000
0.1	One-Time-Use Packet	3 hrs.	24 hrs.	2,800	24	1:1	Thick Liquid (50,000 cP)	-65° to 250°	Gray	Metal, Plastic, Rubber, Glass, Masonry	10	0000000	00000

Epoxy Structural Adhesives

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. The size listed is the combined total of the two parts.

Adhesives with Ten Mixing Sticks

Container				Strength
Net Weight, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining	Pkg. Qty.		Pkg.
0.1	One-Time-Use Packet	45 min.	24 hrs.	2,900	Not Rated	1:1	Thick Liquid (3,700 cP)	0° to 120°	Amber	Metal, Composites	10	0000000	000000

Conductive Adhesives for Electronics

An alternative to solder, these flexible, silver-filled adhesives accommodate joint movement. Use them to bond electrical components and repair circuits.

Epoxy adhesives are two-part adhesives that need to be mixed together. The size listed is the combined total of the two parts.

Epoxy Adhesives

One-Time-Use Packet

Container
Net Weight, oz.	Begins to Harden	Reaches Full Strength	Thermal Conductivity, W/m-K	Surface Resistivity, ohms-cm	Mix Ratio	Consistency	Temp. Range, °F	For Joining		Each
One-Time-Use Packet
0.09	3 hrs.	24 hrs.	1.55	0.05	1:1.15	Paste	-75° to 230°	Ceramic, Glass, Metal	0000000	000000

Surface Filler Patches

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

Devcon Zip Patch™
Mfr. Model No.	Lg.	Wd.	Begins to Harden, min.	Reaches Full Strength, hrs.	Mix Ratio	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
11500	4"	9"	5	4	__	Yes	-40° to 200°	Brown	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Ceramic, Wood	0000000	0000000
Surface Fillers
__	2"	12"	1	24	1:1	Yes	-85° to 220°	Red	Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	00000
__	2"	20"	1	24	1:1	Yes	-85° to 220°	Amber	Machine, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	00000
__	4"	6"	1	24	1:1	Yes	-85° to 220°	Blue	Machine, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	00000
__	4"	12"	1	24	1:1	Yes	-85° to 220°	Green	Machine, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	00000

Surface Fillers

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

Surface fillers in one-time-use packets are also known as double-bubbles.

Container
Net Weight	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On	Pkg. Qty.		Pkg.
Surface Fillers
0.1 oz.	One-Time-Use Packet	25	24 hrs.	Thick Liquid	1:1	Not Rated	0° to 300°	Aluminum	Machine, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Fiberglass	10	0000000	000000

Conductive Surface Fillers for Electronics

A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.

Surface fillers in one-time-use packets and jars come as two parts. The size listed is the combined total of the two parts.

Volume resistivity and surface resistivity measure how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.

Thermal conductivity measures a material’s ability to transfer heat. The higher the rating, the more heat it transfers.

	Container							Temp. Range, °F
Mfr. Model No.	Net Weight, oz.	Type	Begins to Harden	Reaches Full Strength	Thermal Conductivity, W/m-K	Volume Resistivity, ohms-cm	Mix Ratio	Min.	Max.	For Use On		Each
Loctite® Surface Fillers
3888	0.09	One-Time-Use Packet	90 min.	24 hrs.	1.44	0.001	100:6	-40°	170°	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Polycarbonate Plastic	0000000	000000
Surface Fillers
__	0.09	One-Time-Use Packet	90 min.	24 hrs.	6.05	0.009	100:6	-75°	250°	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass	0000000	00000
__	0.35	One-Time-Use Packet	90 min.	24 hrs.	6.05	0.009	100:6	-75°	250°	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass	0000000	000000

The quick brown fox jumped over the lazy dog. Pedestal (35" Ht. x 4" Wd. x 4" Dp.)