Nickel-plated steel has some corrosion resistance.

Made of yellow zinc-plated steel, these metric leveling mounts are more corrosion resistant than nickel-plated steel leveling mounts.

An economical choice for applications in corrosive environments that don't require high load capacities, these mounts have a plastic base.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Made entirely of 316 stainless steel, these metric mounts have superior corrosion resistance.

Punch-out holes in the base let you bolt down these mounts to keep your equipment stationary.

Well-suited to damp environments, these mounts have a stainless steel stud and nut for corrosion resistance.

An offset mounting hole allows for installation without moving your machine.

An economical choice for applications in corrosive environments that don't require high load capacities, these mounts have a plastic base.

Black-oxide steel has a dull shine for areas where appearance is a concern.

Made of 303 stainless steel, these mounts resist corrosion from water and most chemicals.

Well-suited to damp environments, these mounts have a stainless steel nut for excellent corrosion resistance.

Use these mounts on heavy machines and equipment.

Protect surfaces from scratches and wear.

Made of 303 stainless steel, these mounts resist corrosion from water and most chemicals.

Able to withstand temperatures up to 350° F, these have the highest maximum temperature of our plastic mounts.

A shield on the stud prevents dirt accumulation on the threads and provides a finished appearance.

These mounts have a cushion on top to provide padding between your furniture and the mount.

All-stainless steel construction stands up to water and chemicals and won't rust or corrode.

Thread these mounts into machinery to level them on uneven floors in sanitary environments such as food-processing areas.

A two-piece design requires less clearance than one-piece mounts and simplifies installation—raise your machine just enough to slide the base underneath, then insert the stud from above.

Higher deflection ratings translate to greater vibration and shock isolation.

A two-piece design simplifies installation and requires less clearance than one-piece mounts.

An interlocking steel frame in these mounts prevents collapse, even if the rubber fails.

Limit damage during moderate earthquakes.

Well-suited to moist environments, these mounts have a stainless steel plate for excellent corrosion resistance.

Made of tightly layered stainless steel mesh, these mounts withstand temperatures up to 500° F.

Install these mounts with a socket head cap screw—the counterbored hole ensures the screw sits flush with or below the top of the mount.

A two-piece design makes these mounts easier to install than one-piece mounts.

Specifically designed for light vertical loads, these mounts buckle to protect lightweight equipment such as small fans and pumps from vibration.

An interlocking steel frame in these mounts prevents collapse, even if the rubber fails.

Rated for high load capacity, use these inserts to connect threaded leveling mounts to heavy equipment.

Slip these inserts into tubular legs to quickly add threads for attaching leveling mounts. They’re often used in the legs of light equipment and furniture.

Great as nonslip feet, thread these rubber suction cups to the bottom of your lightweight equipment.

These feet are made of UHMW polyethylene plastic, so they won’t dry out and become brittle.

Peel back the film to stick these feet to the bottom of furniture and equipment legs.

Cover the bottom of furniture legs.

Place these feet under furniture and equipment.

Great for use outdoors, these feet are EPDM rubber, which withstands exposure to direct sunlight.

An integral cushion reduces noise and vibration.

All of these bumpers are reinforced with an embedded washer or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Install them with screws.

Select these bumpers for applications that require specific load capacities. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Install them with a screw.

These nonslip bumpers protect equipment while minimizing the movement of objects that come in contact, making them good for positioning and robotic-gripping applications. Install them with adhesives or screws.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist these bumpers into a threaded hole.

These bumpers withstand temperatures up to 300° F, which is twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist them into a threaded hole.

A ridge on the stem provides a tighter grip than other push-in bumpers. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

The stem on these bumpers compresses to fit into tight holes. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount these bumpers on a threaded stud.

Select these bumpers for applications that require specific load capacities. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing. They're comparable to Bumpon bumpers.

Make bumpers the size and shape you need. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing.

With a split design, you can easily place these bumpers on tubing, rods, machinery legs, control shafts, and levers to protect them from impact, dents, and scratches. Use the concealed screw to secure them in place.

Use screws or bolts to attach the mounting plate on these casters to a flat surface. Adjust the leveling pad to keep your equipment stationary and compensate for uneven floors.

The dual-wheel design provides better load distribution and easier turning than leveling plate casters. Adjust the leveling pad to keep your equipment stationary and compensate for uneven floors.

Floor locks bolt or weld to the underside of your equipment and have a spring-loaded base with a nonskid floor pad to keep equipment stationary.