These guardrails sit low to the ground to protect racks and equipment without restricting access.

Restrict and grant access to an area—these guard posts act as a strong physical barrier and have a hinge to fold flat against the ground in either direction.

Framed in aluminum T-slotted extrusions, these customizable machine guards provide multiple points of attachment for other components and structures.

These panels lift on and off their posts in seconds, so you can protect machinery while providing access for maintenance.

Protect personnel and equipment from debris with these portable panels.

Wrap these guards around grip pullers, presses, and other moving equipment to protect yourself from flying debris.

Slip these posts and rails together for a complete railing—no fittings required.

Modular mix-and-match components allow flexible railing configurations.

Connect rails and posts with included slip-on fittings to quickly assemble a railing.

Block chips while maintaining an unobstructed view of the workpiece.

Increase safety and visibility. This clear plastic guard attaches to the guide bar on your saw and has a built-in light.

Pivots provide smooth motion at the junction between two T-slotted rails.

Illuminate workstations, enclosures, and machines.

Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.

These rails have continuous T-slots for attaching fittings. Use this versatile framing to configure machine guards, enclosures, carts, and workstations.

Route wires, cables, and tubing along T-slotted rails.

For repetitive workholding, mount these clamps to T-slotted framing to hold and release parts.

Add rollers to T-slotted framing to create flow rails, ball transfer tables, and other manual conveyors.

Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.

Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.

Slide drawers, panels, and doors with these tracks and rollers.

Mount these bull's eye levels to workstation and table frames made of T-slotted framing for easy leveling in all directions on the horizontal plane.

Attach and position phones, tablets, monitors, and other displays on T-slotted rails.

Get projects off to a quick start with these kits that include the components you need to build simple structures, such as workbenches and stands.

Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

This welded, one-piece strut channel combines two strut channels side-to-side.

Serrated grooves grip the lip of the channel.

Use with hex nuts to connect threaded rod.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

Position two strut channels at a 30° to 60° angle, then tighten the bolt to secure.

Brackets mount on the outside of strut channel to allow trolley movement.

Keep hardware centered in the strut channel slot.

Slip these hangers onto the lip of top-opening strut channel to attach chain, wire rope, pipe, and threaded rod.

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

Securely fasten strut channel to the floor.

Push these nuts into place rather than threading them onto a fastener.

Quickly attach these nuts by twisting them closed at any point along a threaded rod.

Provide smooth motion between two pieces of strut channel.

Add hardware to strut channel without having to hold the washer in place or reach inside the channel.

In addition to serrated grooves for gripping the lip of the channel, these nuts have wings for easy positioning.

Mount a length of strut channel between the ends of a beam to run cable and conduit along the beam without drilling.

Thick construction makes this framing strong and sturdy.

To provide corrosion resistance in wet environments, this framing is galvanized.

Stronger than plastic and aluminum, this is the lightest weight framing we offer. It has good resistance to chemicals and salt water.

Close off openings in structures while allowing air to pass through.

Extend the life of your rigid shaft couplings by blocking out dirt, water, lubricants, and other contaminants. These two-piece covers twist together to form a shell around the coupling.

Delay access to hazardous areas until conditions are safe; use these switches with machines that take time to stop after they are turned off. They mount to a door frame.

Transmit a beam of light up to 225 ft. from the transmitter to the receiver.

Replace access door hinges with these switches; they actuate when the door opens at least 4°.

Reduce noise caused by HVAC systems. These sturdy rubber supports isolate vibration caused by heat pumps and air conditioning units, resulting in a quieter facility. When used on roofs, they also keep components above puddled water, which can cause damage.

Even when these clamps are installed side by side, the clamping screws remain accessible. Use them to route pipe, tubing, and conduit across strut channel.

Secure insulated pipe to strut channel without pinching the insulation or exposing the pipe. These clamps are sized for use with insulated pipe and have a plastic insert that creates a seal around the insulation to prevent the pipe from sweating, which can cause mold and corrosion.

For areas with low clearance, these clamps have the mounting fastener to the side of the material, rather than on top.

Adjust supports to the exact height you need to route pipe, conduit, and tubing through strut-mount routing clamps and hangers.

Cover standard or flange-mount bearings to protect personnel from injury and keep contaminants out.

These complete partitions include everything you'll need.