Extend the reach of USB devices. Run an Ethernet cord (sold separately) from the transmitter to the receiver. USB ports are backward compatible, so they work with cords and connectors that meet the same or a lower USB standard.

Transmit data between computers and other devices that have different USB sizes or styles. All USB adapters are backward compatible, so they work with cords and connectors that meet the same or a lower USB standard.

Use these connectors and cords to make Ethernet connections.

IP67 rated connectors and cords are protected against dust and temporary submersion when mated.

Shielded adapters prevent electromagnetic interference (EMI) to minimize signal distortion.

For technical drawings and 3-D models, click on a part number.

Protect connections in washdown environments while maintaining access—these RJ45 plugs and adapters latch together securely, yet quickly detach. When mated, they’re rated IP65 and IP67 for protection against washdowns and temporary submersion. All are shielded to prevent electromagnetic interference.

Plugs have a snap-on wire connection that pierces the insulation to eliminate the need for wire stripping.

Adapters have an attached cover to maintain the IP67 rating when not in use.

Unlike traditional RJ45 connectors found in data centers, these connectors stand up to rugged industrial environments since they tightly thread to devices with M12 connections, sealing out contaminants and resisting shaking loose from vibration. Use them to transfer high-speed data between sensors, switches, computers, IO modules, programmable logic controllers (PLCs), and other equipment. They can also power devices as they send data, so you don’t need a separate power cord. But, the device must be Power over Ethernet (PoE) compatible. These connectors are often used with EtherNet/IP, Profinet, and EtherCAT systems. Since they’re shielded, they block signal interference from nearby devices, maintaining their speed and data integrity. Poles and keyways on the face adhere to standard coding layouts to reduce the chance you’ll mismatch connections.

When choosing an Ethernet connector, make sure you match or exceed your network’s category industry designation. These connectors are backward compatible—for example, a Category 6 connector will work in a Category 5 network, but it’ll only run at the Category 5 speed.

A-coded and X-coded connectors send data faster than D-coded connectors, so they’re best for robotics and other systems that run multi-step programs.

Adapters create a transition point between an M12 and RJ45 connection. Use them in panels or walls—your tough threaded connection on one side and your control panel and computer or PLC on the other.

90° elbow connectors run your cord along the side of equipment, so they fit behind machines and in tight spaces.

IP rated connectors keep out dust and can be used in wet areas when mated or capped. IP65 connectors can be lightly rinsed. IP67 connectors can be submerged temporarily.

Add caps to protect connectors and maintain their IP ratings when not in use.

Mount these Ethernet switches to 35 mm DIN rail to expand your data network by connecting computers, printers, and servers.

Switches with a fiber-optic connection accept multimode fiber-optic cords.

Expand your data network by connecting computers, printers, and servers.

For use in harsh environments, these IP67 rated switches are protected from temporary submersion, and can withstand a wide temperature range. The D-coded micro M12 connections screw together and remain secure in high-vibration applications. Use them to expand your data network by connecting computers, printers, and servers.

For technical drawings and 3-D models, click on a part number.

Link industrial equipment with multiple computers to expand your data network. Use these switches with ix industrial connectors and cords.

For technical drawings and 3-D models, click on a part number.