Seal OD Seal OD |
|---|
Seal ID Seal ID |
|---|
|
For Rod Diameter For Rod Diameter |
|---|
Seal Width Seal Width |
|---|
For Use With For Use With |
|---|
|
For Cylinder Type For Cylinder Type |
|---|
|
Overall Seal Width Overall Seal Width |
|---|
For Groove Diameter For Groove Diameter |
|---|
|
For Groove Width For Groove Width |
|---|
|
|
For Groove Shoulder Diameter For Groove Shoulder Diameter |
|---|
|
Maximum Speed Maximum Speed |
|---|
|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Hardness Hardness |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Specifications Met Specifications Met |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Close
About Cylinder Seals
Rod wipers scrape dirt, dust, and moisture from the rod, preventing contamination inside your cylinder.
Rod seals maintain the pressure inside cylinders and prevent fluid from leaking out.
Wear rings guide the rod and piston to prevent uneven wear and optimize seal performance.
Head seals are a more reliable alternative to the standard O-ring/backup ring combination—they resist twisting and remain stable even in applications with fluctuating pressure.
Buffering seals protect hydraulic cylinders from pressure spikes and shock in high-pressure hydraulic applications.
Cushioning seals minimize wear and noise in air-powered cylinders by preventing the piston from slamming against the cylinder body.
Piston seals make a seal between their outside edge and the cylinder bore to prevent internal leaks.
Rod-Sealing Wipers
Side 1
Side 2
A two-lip design means that these wipers also function as a rod seal.
Wipers that meet ISO 6195 Type C fit grooves with the dimensions and tolerances specified by the standard.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.
Wipers
Profile
For Groove | Seal | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rod Dia. | Dia. | Shoulder Dia. | Wd. | Wd. | O'all Wd. | Max. Speed, ft./sec. | Temp. Range, °F | Hardness | Color | Each | |
Buna-N Rubber | |||||||||||
| 1/4" | 0.552" | 0.370" | 0.203" | 0.203" | 0.245" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 000000 |
| 3/8" | 0.677" | 0.495" | 0.203" | 0.187" | 0.245" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 1/2" | 0.802" | 0.620" | 0.203" | 0.203" | 0.245" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 5/8" | 0.927" | 0.745" | 0.203" | 0.203" | 0.245" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 3/4" | 1.052" | 0.870" | 0.203" | 0.203" | 0.245" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 1" | 1.365" | 1.135" | 0.218" | 0.203" | 0.275" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 1 1/8" | 1.490" | 1.260" | 0.218" | 0.218" | 0.275" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 1 1/4" | 1.615" | 1.385" | 0.218" | 0.203" | 0.245" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 1 3/8" | 1.740" | 1.510" | 0.218" | 0.218" | 0.275" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 1 1/2" | 1.865" | 1.635" | 0.218" | 0.218" | 0.275" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 1 5/8" | 1.990" | 1.760" | 0.218" | 0.218" | 0.275" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 00000 |
| 1 3/4" | 2.115" | 1.885" | 0.218" | 0.218" | 0.275" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 1 7/8" | 2.240" | 2.010" | 0.218" | 0.218" | 0.275" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 00000 |
| 2" | 2.365" | 2.135" | 0.218" | 0.218" | 0.275" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 2 1/4" | 2.745" | 2.385" | 0.281" | 0.281" | 0.351" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 00000 |
| 2 1/2" | 2.995" | 2.635" | 0.281" | 0.281" | 0.351" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 00000 |
| 3" | 3.495" | 3.135" | 0.281" | 0.281" | 0.351" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 00000 |
| 3 1/2" | 3.995" | 3.635" | 0.281" | 0.281" | 0.351" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 00000 |
| 4" | 4.495" | 4.135" | 0.281" | 0.281" | 0.351" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 00000 |
ISO 6195 Type C Wipers
Profile
For Groove | Seal | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rod Dia. | Dia. | Shoulder Dia. | Wd. | Wd. | O'all Wd. | Max. Speed, ft./sec. | Max. Pressure, psi | Temp. Range, °F | Hardness | Color | Each | |
Polyurethane Rubber | ||||||||||||
| 1/2" | 0.802" | 0.62" | 0.203" | 0.203" | 0.283" | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
| 5/8" | 0.927" | 0.745" | 0.203" | 0.203" | 0.283" | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
| 3/4" | 1.052" | 0.87" | 0.203" | 0.203" | 0.283" | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
| 7/8" | 1.24" | 1.01" | 0.218" | 0.218" | 0.298" | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
| 1" | 1.365" | 1.135" | 0.218" | 0.218" | 0.298" | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
| 1 3/8" | 1.74" | 1.51" | 0.218" | 0.218" | 0.298" | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
| 1 1/2" | 1.865" | 1.635" | 0.218" | 0.218" | 0.298" | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
| 2" | 2.365" | 2.135" | 0.218" | 0.218" | 0.298" | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
| 16mm | 22mm | 18.5mm | 4mm | 4mm | 6mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
| 18mm | 24mm | 20.5mm | 4mm | 4mm | 6mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
| 25mm | 31mm | 27.5mm | 4mm | 4mm | 6mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
| 28mm | 36mm | 31mm | 5mm | 5mm | 7mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
| 35mm | 43mm | 38mm | 5mm | 5mm | 7mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
| 40mm | 48mm | 43mm | 5mm | 5mm | 7mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
| 45mm | 53mm | 48mm | 5mm | 5mm | 7mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
| 50mm | 58mm | 53mm | 5mm | 5mm | 7mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
| 60mm | 70mm | 63mm | 6mm | 6mm | 8mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
| 65mm | 75mm | 68mm | 6mm | 6mm | 8mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
| 70mm | 80mm | 73mm | 6mm | 6mm | 8mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
| 80mm | 90mm | 83mm | 6mm | 6mm | 8mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
| 90mm | 100mm | 93mm | 6mm | 6mm | 8mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
| 100mm | 110mm | 103mm | 6mm | 6mm | 8mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
| 120mm | 135mm | 124mm | 8.5mm | 8.5mm | 10.5mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
Rod Wipers
Side 1
Side 2
Also known as U-type wipers, these have a single lip that scrapes dirt, dust, and moisture from the rod, preventing contamination inside the cylinder.
Wipers that meet MS28776 fit dash size grooves specified by the standard.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.
Wipers
Profile
For Groove | Seal | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rod Dia. | Dia. | Shoulder Dia. | Wd. | Wd. | O'all Wd. | Max. Speed, ft./sec. | Max. Pressure, psi | Temp. Range, °F | Hardness | Color | Each | |
Polyurethane Rubber | ||||||||||||
| 3/8" | 0.622" | 0.535" | 0.124" | 0.125" | 0.210" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 00000 |
| 1/2" | 0.747" | 0.660" | 0.124" | 0.125" | 0.210" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 5/8" | 0.872" | 0.785" | 0.124" | 0.125" | 0.210" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 3/4" | 1.122" | 0.995" | 0.187" | 0.188" | 0.305" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 7/8" | 1.247" | 1.120" | 0.187" | 0.188" | 0.305" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 1" | 1.372" | 1.245" | 0.187" | 0.188" | 0.305" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 1 1/8" | 1.497" | 1.370" | 0.187" | 0.188" | 0.305" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 1 1/4" | 1.622" | 1.495" | 0.187" | 0.188" | 0.305" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 1 3/8" | 1.747" | 1.620" | 0.187" | 0.188" | 0.305" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 1 1/2" | 1.872" | 1.745" | 0.187" | 0.188" | 0.305" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 1 3/4" | 2.122" | 1.995" | 0.187" | 0.188" | 0.305" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 2" | 2.497" | 2.327" | 0.249" | 0.250" | 0.395" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 2 1/4" | 2.747" | 2.577" | 0.249" | 0.250" | 0.395" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 2 1/2" | 2.997" | 2.827" | 0.249" | 0.250" | 0.395" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 2 3/4" | 3.247" | 3.077" | 0.249" | 0.250" | 0.395" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 3" | 3.497" | 3.327" | 0.249" | 0.250" | 0.395" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 3 1/2" | 3.997" | 3.827" | 0.249" | 0.250" | 0.395" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 4" | 4.497" | 4.327" | 0.249" | 0.250" | 0.395" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
| 4 1/2" | 5.247" | 4.993" | 0.374" | 0.375" | 0.585" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 00000 |
| 5" | 5.747" | 5.493" | 0.374" | 0.375" | 0.585" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 00000 |
| 6" | 6.747" | 6.493" | 0.374" | 0.375" | 0.585" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 00000 |
MS28776 Wipers
Profile
For Groove | Seal | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rod Dia. | Dia. | Shoulder Dia. | Wd. | Wd. | O'all Wd. | Max. Speed, ft./sec. | Temp. Range, °F | Hardness | Color | Specifications Met | Each | |
Fluoroelastomer Rubber | ||||||||||||
| 1/2" | 0.760" | 0.647" | 0.107" | 0.099" | 0.187" | 3.3 | -5° to 400° | Durometer 90A (Extra Hard) | Black | MS28776-1 | 0000000 | 000000 |
| 5/8" | 0.885" | 0.772" | 0.107" | 0.099" | 0.187" | 3.3 | -5° to 400° | Durometer 90A (Extra Hard) | Black | MS28776-3 | 0000000 | 00000 |
| 3/4" | 1.010" | 0.897" | 0.107" | 0.099" | 0.187" | 3.3 | -5° to 400° | Durometer 90A (Extra Hard) | Black | MS28776-5 | 0000000 | 00000 |
| 7/8" | 1.147" | 1.023" | 0.107" | 0.099" | 0.187" | 3.3 | -5° to 400° | Durometer 90A (Extra Hard) | Black | MS28776-7 | 0000000 | 00000 |
| 1" | 1.272" | 1.148" | 0.107" | 0.099" | 0.187" | 3.3 | -5° to 400° | Durometer 90A (Extra Hard) | Black | MS28776-9 | 0000000 | 00000 |
| 1 1/8" | 1.397" | 1.273" | 0.107" | 0.099" | 0.187" | 3.3 | -5° to 400° | Durometer 90A (Extra Hard) | Black | MS28776-11 | 0000000 | 00000 |
| 1 1/4" | 1.522" | 1.398" | 0.107" | 0.099" | 0.187" | 3.3 | -5° to 400° | Durometer 90A (Extra Hard) | Black | MS28776-13 | 0000000 | 00000 |
Cylinder-Sealing Rod Wipers
Side 1
Side 2
Profile
These wipers seal against the cylinder to prevent contaminants from entering between the outside edge and the housing. They’re often used in vertically mounted cylinders.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.
For Groove | Seal | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rod Dia. | Dia. | Shoulder Dia. | Wd. | Wd. | O'all Wd. | Max. Speed, ft./sec. | Temp. Range, °F | Hardness | Color | Each | |
Polyurethane Rubber | |||||||||||
| 1/4" | 0.497" | 0.410" | 0.124" | 0.210" | 0.215" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
| 3/8" | 0.622" | 0.535" | 0.124" | 0.210" | 0.215" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 0000 |
| 1/2" | 0.747" | 0.660" | 0.124" | 0.210" | 0.215" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 0000 |
| 5/8" | 0.872" | 0.785" | 0.124" | 0.210" | 0.215" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 0000 |
| 3/4" | 1.122" | 0.995" | 0.187" | 0.305" | 0.315" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 0000 |
| 7/8" | 1.247" | 1.120" | 0.187" | 0.305" | 0.315" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 0000 |
| 1" | 1.372" | 1.245" | 0.187" | 0.305" | 0.315" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
| 1 1/8" | 1.497" | 1.370" | 0.187" | 0.305" | 0.315" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
| 1 1/4" | 1.622" | 1.495" | 0.187" | 0.305" | 0.315" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
| 1 3/8" | 1.747" | 1.620" | 0.187" | 0.305" | 0.315" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
| 1 1/2" | 1.872" | 1.745" | 0.187" | 0.305" | 0.315" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
| 1 5/8" | 1.997" | 1.870" | 0.187" | 0.305" | 0.315" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
| 1 3/4" | 2.122" | 1.995" | 0.187" | 0.305" | 0.315" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
| 1 7/8" | 2.247" | 2.120" | 0.187" | 0.305" | 0.315" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
| 2" | 2.497" | 2.327" | 0.249" | 0.395" | 0.415" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
| 2 1/4" | 2.747" | 2.577" | 0.249" | 0.395" | 0.415" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
| 2 1/2" | 2.997" | 2.827" | 0.249" | 0.395" | 0.415" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
| 2 3/4" | 3.247" | 3.077" | 0.249" | 0.395" | 0.415" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
| 3" | 3.497" | 3.327" | 0.249" | 0.395" | 0.415" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
High-Speed Rod Wipers
Side 1
Side 2
Profile
Made from MDS-filled PTFE for a slippery surface, these wipers allow rods to move three times faster than other rod wipers.
For technical drawings and 3-D models, click on a part number.
For Groove | O-Ring | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rod Dia. | Dia. | Shoulder Dia. | Wd. | Max. Speed, ft./sec. | Temp. Range, °F | Hardness | Color | Hardness | Color | Each | |
MDS-Filled PTFE Plastic with Buna-N Rubber O-Ring | |||||||||||
| 5/8" | 0.893" | 0.685" | 0.201" | 13 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 000000 |
| 1" | 1.268" | 1.060" | 0.201" | 13 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 1 3/8" | 1.564" | 1.435" | 0.201" | 13 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 1 3/4" | 2.018" | 1.810" | 0.201" | 13 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 2" | 2.268" | 2.060" | 0.201" | 13 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 2 1/4" | 2.518" | 2.310" | 0.201" | 13 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 2 1/2" | 2.768" | 2.560" | 0.201" | 13 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
Rod Wipers for Open Grooves
Side 1
Side 2
Profile
Replace wipers in open-groove cylinders—these wipers have an integral steel case that press fits into the groove around the rod.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.
For Groove | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Rod Dia. | Dia. | Wd. | Max. Speed, ft./sec. | Temp. Range, °F | Hardness | Color | Each | |
Polyurethane Rubber with Steel Case | ||||||||
| 1/2" | 1.000" | 0.250" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
| 5/8" | 1.125" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
| 3/4" | 1.250" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
| 7/8" | 1.375" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
| 1" | 1.500" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
| 1 1/8" | 1.625" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
| 1 1/4" | 1.750" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
| 1 3/8" | 1.875" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
| 1 1/2" | 2.000" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
| 1 5/8" | 2.125" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
| 1 3/4" | 2.250" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
| 2" | 2.500" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
| 2 1/4" | 2.750" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
| 2 3/8" | 2.875" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
| 2 1/2" | 3.000" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
| 2 3/4" | 3.250" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
| 3" | 3.500" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |