The fastest way to install shallow-hole female-threaded anchors. Just push the tip of the tool into the anchor and turn the tool with a power drill.

Drive these tools with a hammer to expand anchors.

Often referred to as four-way expansion anchors, these expand in four directions to resist loosening from vibration.

More corrosion resistant than 18-8 stainless steel anchors, these 316 stainless steel anchors have excellent resistance to chemicals and salt water.

Drive these tools with a hammer until the thicker portion of the tool makes contact with the anchor, causing it to expand.

These steel anchors are available with corrosion-resistant finishes.

Keep fixtures solidly in place—these anchors have two locking wedges that won't shake loose.

These 18-8 stainless steel anchors have good chemical resistance.

The removable flat head provides a flush finish in countersunk holes.

Also known as mungo anchors, these have large fins that prevent rotation.

Also known as lag shields, these anchors are designed for use with large-diameter wood screws.

A zinc plating provides corrosion resistance in wet environments.

Also known as drive rivets, install these anchors by hammering the pin into the body. Pry out the pin to remove.

These anchors are also known as drive rivets. To install, hammer the screw into the body. Unthread the screw to remove.

A tamper-resistant nut prevents unwanted removal of the object you are anchoring.

Turn the bolt to expand the nut for a secure hold in concrete. These anchors are often used to anchor machinery.

Used with adhesive in bricks and hollow blocks, such as cinder blocks, these mesh tubes create a stronger hold for rods and studs than other anchors.

Fins prevent these anchors from spinning during installation.

A drilled hole is required for installation.

These anchors fit a range of sheet metal and wood screw sizes since they form their own threads when installed.

You need access to only one side of the material to install these rivets.