The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.

Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.

Use these cords where ignitable gas and dust may be present. They're CSA certified for Class I, Divisions 1 and 2, Groups B, C, and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.

Designed for indoor use, these cords are often used to power appliances.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Keep personnel safe from electric shock with these cords.

Also known as hospital-grade cords, these have extra-tight connections to prevent them from detaching. The connectors are marked with a green dot.

Change the connection style between an outlet and your equipment.

These cords have an oil- and water-resistant insulation and impact-resistant connectors for protection in harsh environments.

Give the connectors on these cords a quarter turn to lock in place.

Attach these splitters to an extension cord to power multiple devices from one cord.

Hardwire one of these converters to an extension cord to keep personnel safe from electric shock.

Designed for indoor applications, these cords are often used to power appliances.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

After a power failure, these cords must be manually reset, preventing unexpected equipment startup.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

Create a vibration-resistant connection—the socket on these cords securely locks onto any male receptacle and will not detach until manually unlocked.

The shielding blocks signal interference from nearby equipment and devices.

Plug these cords into fans that have quick-disconnect terminals.

Hardwire these cords to equipment.

These cords have a Nano M8 connector (also known as a pico connector) on one end and an USB Type-A connector on the other.

Often used in automation systems such as conveyors and sorters, these cords have plug and socket ends, so they quickly connect and disconnect for maintenance and do not need to be hardwired.

Save energy by automatically turning off unused outlets. The master outlet controls five outlets and shuts off power to the other outlets when a device plugged into the master is turned off.

The power switch to these outlet strips is on a 44" long cord, so you can control power even when the strips are in hard to reach places, such as under a desk.

Keep personnel safe from electric shock with ground fault protection.

Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.

Connect multiple devices from a single outlet.

Mount these outlet strips to a desktop or workbench with the mounting hardware, or set them on a surface.

Mount these strips into standard 19" wide electronics racks and enclosures.

Made of impact-resistant plastic, these reels are more durable than other automatic-wind cord reels.

Connect the wires in your power cord to these reels for a permanent and protected connection—the screw terminals are in a gasketed dust- and water-resistant NEMA 4 enclosure.

Use these cord reels where ignitable gas and dust may be present. They're rated NEMA 4 and UL listed for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.

The outlets have covers to keep out water and dust when not in use.

Plug a cord into these reels.

Store and transport cords.

Use these unshielded cords where signal interference is not a concern.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission. They have an RJ45 plug on each end.

Often used in labs, storage facilities, and offices, the shielding blocks low to moderate signal interference from nearby equipment and devices. These cords have a flange on the socket end to mount them in a panel cutout.

To send high-speed data in tough, rugged environments, these cords have an M12 connector on one end that threads onto switches, sensors, and other devices prone to vibration. The other end has a traditional RJ45 plug that connects to Ethernet equipment, such as computers, IO modules, and programmable logic controllers (PLCs).

Connect sensors, switches, I/O modules, and computers in tight spaces.

These cords contain a single pair of twisted wires, making them lighter and more flexible than other Ethernet cords. They’re good for transportation, robotics, and automation applications.

With Kevlar-reinforced nylon armor and a high-strength aluminum connector, these USB cords stand up to frequent use and bending better than standard USB cords.

Attach these caps to the socket end of washdown USB cords to maintain an IP67 rating when cords are not in use.

Often used in robotics, packaging, conveyors, and other applications with constant movement and high temperatures, these silicone rubber cords bend and flex at temperatures up to 325° F.

The insulation serves as a tough armor that protects these cords in high-traffic areas.

Replace the cords connecting your robot controller and teach pendant when they become worn, or switch them out for a different length.

Transmit video to a single monitor.

Send high-definition signals to monitors, TVs, and projectors.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.

Play audio from one source on two different speakers.

Commonly used for movie, stage, and interior building lighting, these cords connect to equipment with five-pin XLR connections.

Connect computers, servers, and switches in a fiber-optic network.

Play audio and 4K video from a single source on multiple displays. These HDMI splitters are handy for classrooms, conference rooms, factory floors, and trade shows.

Use these connectors and cords to make Ethernet connections in wet location environments.

When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it to send data between computers, servers, and switches.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. It has an oil-resistant insulation to protect wires as the cable moves from duct to equipment or machinery.

Connect devices such as sensors, programmable logic controllers, and actuators to an automated network.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it to transmit audio, video, and data signals.

Often used to send signal and data to order pickers and cranes, this cable withstands continuous motion applications without degrading data or signal transmission.