The shielding blocks signal interference from nearby equipment and devices.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission. They have an RJ45 plug on each end.

The plugs on these cords pivot up to 90° in each direction to fit Ethernet jacks at awkward angles or in tight spots, such as behind equipment or in enclosures.

Often used in labs, storage facilities, and offices, the shielding blocks low to moderate signal interference from nearby equipment and devices. These cords have a flange on the socket end to mount them in a panel cutout.

To send high-speed data in tough, rugged environments, these cords have an M12 connector on one end that threads onto switches, sensors, and other devices prone to vibration. The other end has a traditional RJ45 plug that connects to Ethernet equipment, such as computers, IO modules, and programmable logic controllers (PLCs).

Also known as plenum-rated cords, these CMP ethernet cords have flame-resistant, low-smoke insulation and can be used without conduit in duct work and above a drop ceiling.

Protect sensitive equipment from electromagnetic interference.

A threaded M8 end on these connectors keeps contaminants out and withstands vibration better than RJ45 ends on traditional Ethernet cords.

Add RJ45 connectors to circuit boards.

These sockets have a 110 punch-down connection; use a punch-down tool to terminate.

Protect sensitive equipment from electromagnetic interference.

The snap-on wire connection pierces the insulation to eliminate the need for wire stripping.

Use these connectors and cords to make Ethernet connections in wet location environments.