The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.

Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.

Power multiple devices with one extension cord.

Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.

In addition to an outlet on the end, these cords have multiple inline outlets.

These self-coiling cords return to their retracted length after stretching for tangle-free storage.

Also known as hospital-grade cords, these have extra-tight connections to prevent them from detaching. The connectors are marked with a green dot.

Keep personnel safe from electric shock with these cords.

Attach these splitters to an extension cord to power multiple devices from one cord.

Designed for indoor applications, these cords are often used to power appliances.

Use these cords with computers, lab equipment, and office machines that have IEC connections.

Create a vibration-resistant connection—the socket on these cords locks onto any male receptacle and will not detach until manually unlocked.

Plug these cords into computers, lab equipment, and office machines that have IEC connections.

Save energy by automatically turning off unused outlets. The master outlet controls five outlets and shuts off power to the other outlets when a device plugged into the master is turned off.

The power switch to these outlet strips is on a 44" long cord, so you can control power even when the strips are in hard to reach places, such as under a desk.

Keep personnel safe from electric shock with ground fault protection.

With a rubber housing, these outlet strips withstand drops and other impact.

Turn a single outlet into five outlets with ground fault protection to minimize the risk of electric shock.

Create a permanent outlet system without opening walls. These outlet strips mount to a wall with clips and hardwire to an existing electrical system.

Install these extra-long strips onto the frame of an electrical cabinet.

Made of impact-resistant plastic, these reels are more durable than other automatic-wind cord reels.

Intended for demanding applications, these reels include an oil- and water-resistant extension cord.

The outlets have covers to keep out water and dust when not in use.

Attach the wires in a power cord to these reels for a permanent connection.

Change a turn-lock to a straight-blade connection, or a straight-blade to a turn-lock connection.

Use these connectors in general purpose residential and commercial applications.

Access the wire connection by opening the hinged housing. These connectors have screw terminals to create a secure connection; wire must be stripped before winding around the screw terminal.

Protect computers and other sensitive equipment from electromagnetic interference (EMI). Also known as isolated ground receptacles.

Check the status of a ground connection—a green light signals that connectors have power and are safely grounded.

When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.

A rubber housing protects these connectors from damage caused by drops and impact.

Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation. When mated with a receptacle, these plugs have an extra-tight fit to withstand high vibration. Also known as hospital grade plugs.

Add a fuse to protect equipment from current overload. When mated with a receptacle, these plugs have an extra-tight fit to remain secure in high vibration environments. They're also known as hospital grade plugs.

Rated NEMA 6P and 13, IP66, and IP69K when mated, connectors withstand oil/coolant spraying, high-pressure, high-temperature washdowns, and are corrosion resistant so they can be used in marine environments.

Use these general purpose connectors indoors in high vibration applications. A quarter turn locks them together when mated to remain secure in high-vibration applications.

Check the status of a ground connection—a green light signals that connectors have power and are safely grounded. They turn to lock together when mated to prevent accidental disconnection.

When mated, these connectors meet NEMA 6P for protection against washdowns and temporary submersion.

Rated NEMA 6P, NEMA 13, IP66, and IP69K when mated, these connectors withstand high-pressure, high-temperature washdowns, oil/coolant splashing, and are corrosion-resistant so they can be used in high-vibration marine environments.

Often used to send power and signal to automated systems, motors, and pumps, these mini connectors carry higher currents than M5, M8, and M12 connectors.

A sealed housing protects connectors from weather. Sets include a plug and socket with wire leads already installed. They fit standard Molex connectors.

Power robotic arms and other high-amperage machines in motor controls, conveyors, and sorting and packaging systems from your main M35 power line.

Reduce the likelihood of slips and falls in high-traffic areas—connectors won't roll when stepped on.