Designed for indoor applications, these cords are often used to power appliances.

Use these cords where ignitable gas and dust may be present. They're CSA certified for Class I, Divisions 1 and 2, Groups B, C, and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.

These self-coiling cords return to their retracted length after stretching for tangle-free storage.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Keep personnel safe from electric shock with these cords.

Attach these splitters to an extension cord to power multiple devices from one cord.

Use these cords with computers, lab equipment, and office machines that have IEC connections.

Often used in offices and workstations, these outlet strips power multiple devices from a single wall outlet.

With a rubber housing, these outlet strips withstand drops and other impact.

Made of impact-resistant plastic, these reels are more durable than other automatic-wind cord reels.

Connect the wires in your power cord to these reels for a permanent and protected connection—the screw terminals are in a gasketed dust- and water-resistant NEMA 4 enclosure.

Built to handle tough, repetitive-use applications, these are more durable than standard straight-blade connectors.

Access the wire connection by opening the hinged housing. These connectors have screw terminals to create a secure connection; wire must be stripped before winding around the screw terminal.

Check the status of a ground connection—a green light signals that connectors have power and are safely grounded.

A rubber housing protects these connectors from damage caused by drops and impact.

Use connectors where ignitable gas and dust may be present. They are UL listed for Class I, Division 1 and 2, Groups C and D; Class II, Division 1 and 2, Groups F and G; and Class III hazardous environments.

Stainless steel hardware and nickel-plated blades or slots protect connections from damage in corrosive environments.

Use these general purpose connectors indoors in high vibration applications. A quarter turn locks them together when mated to remain secure in high-vibration applications.

Check the status of a ground connection—a green light signals that connectors have power and are safely grounded. They turn to lock together when mated to prevent accidental disconnection.

A rubber housing protects these connectors from damage caused by drops and impact. They turn to lock together when mated to prevent accidental disconnection.

A quarter turn locks these connectors in an outlet to remain secure in high-vibration applications and prevent accidental disconnection. They are not compatible with NEMA configurations.

Connect and disconnect with the power on—spring-loaded contacts open like a switch when separating the connectors, preventing an electrical arc.

A sealed housing protects connectors from weather. Sets include a plug and socket with wire leads already installed. They fit standard Molex connectors.

Quickly replace or add connectors to an existing wiring system—connectors come assembled with wire leads already installed. Also known as weather-pack connectors, they withstand moisture, harsh engine fluids, and high temperatures.

These general purpose M23 connectors send power or signal to servomotors, servocontrollers, and servodrives.