Like a tree trunk connecting to branches, these cords supply power to a chain of devices. Send power to high-amperage motors, robotic arms, and other machines in motor controls, conveyors, and sorting and packaging systems. All quickly connect and disconnect for easy installation and maintenance.

UL and C-UL listed, these cords meet American and Canadian safety standards. They comply with TC-ER requirements, so they withstand being hit and crushed when exposed. Their inner and outer insulation resist oil and water as well, thanks to their STOOW rating. IP and NEMA rated when connected, these cords resist corrosion and seal out dust and water from weather and washdowns. You can even safely submerse them for brief periods of time.

Attach M35 connectors or M22 cords and connectors to extend your power line and reach more devices in your system. Connecting tees link multiple pieces of equipment with M35 connections. Reducing tees join equipment with M35 connections to equipment with M22 connections.

Add a cap to protect these cords from dust when they’re not in use.

Optional locking clips stop your cord from coming loose when powering equipment that carries high amperage.

For technical drawings and 3-D models, click on a part number.

Connect the wires in your power cord to these reels for a permanent and protected connection—the screw terminals are in a gasketed dust- and water-resistant NEMA 4 enclosure. The included extension cord with wire leads resists water and oil. These reels have a direct-drive, lifetime-lubricated spring that provides reliable operation and long life for extension cord retraction. A ratchet holds the cord at any length; a quick pull retracts the cord. Or, flip a switch to disengage the ratchet and use the automatic take-up feature to maintain constant tension on the cord. A roller guide provides smooth winding.

Swivel base (sold separately) permits 345° rotation. Cord stops (sold separately) allow you to control how much cord retracts into the reel.

For technical drawings and 3-D models, click on a part number.

Often used to send power and signal to automated systems, motors, and pumps, these mini connectors carry higher currents than M5, M8, and M12 connectors. A threaded housing securely mates with other mini connectors and won’t come loose from shaking or vibration. They have a standard pole layout and housing thread size to reduce the chance you’ll mis-mate connectors.

Connectors with a 0.87" face diameter have the highest current ratings, so you can use them for heavier duty industrial machinery such as cooling fans, grinders, and conveyor systems. The plugs and sockets have a rubber cable outer insulation, which resists oil, water, and weld slag. This makes them a good choice for wet and harsh industrial environments.

When mated, these connectors meet IP or NEMA ratings. IP68 and NEMA 6P rated connectors protect against dust, submersion, washdowns, and weather.

Caps protect connectors and maintain their IP and NEMA ratings when not in use.

Thread adapters connect plugs and sockets that both have internal threads.

For technical drawings and 3-D models, click on a part number.

Each set includes a plug and a socket.

13A and 25A crimp-on connectors are IP67 rated to provide protection from dust and temporary submersion. 25A connectors are only IP67 rated when mated.

Connectors with a crimp-on connection require a crimper (sold separately) for wire installation.

For technical drawings and 3-D models, click on a part number.

A sealed polystyrene plastic housing protects connectors from weather. All come assembled with wire leads already installed so they can be quickly added to existing wiring systems. Each set includes one male plug and one female socket. A locking tab keeps them securely in place when mated.

For technical drawings and 3-D models, click on a part number.