After shutting off power to equipment during a power failure, these cords must be manually reset, preventing unexpected equipment start-up. Use them to replace three-wire power cords on equipment driven by small single-phase motors. The industry designation is SJTO, so the insulation resists oil.

With a single cord, these splitters join two devices with M12 connectors to a distribution block or I/O module with M12 connectors. Often used with sensors and actuators, they send signals/power to your devices through one connection. Rated IP65, IP66K, and IP67, all stand up to dust, high-pressure washdowns, and brief submersion.

Caps (sold separately) protect connections when not in use.

For technical drawings and 3-D models, click on a part number.

Provide power to multiple devices with these outlet strips. A circuit breaker prevents damage from current overload and short circuits.

Outlet strips with 90° and 360° outlet orientation accommodate large plugs.

Intended to withstand demanding applications, these reels have a steel housing and an oil- and water-resistant extension cord. The automatic take-up feature maintains constant tension on the extension cord as the spring-driven winding mechanism retracts it. An adjustable ball lock controls how much cord retracts into the reel.

Reels with a swing-mount bracket dispense cord at any angle.

Connect devices such as computers, printers, and mobile devices. The higher the USB standard, the faster cords can transmit data. These cords are backward compatible, so they work with cords and connectors that meet the same or lower USB standard.

Use power cords to charge devices. Data cords move data between devices.

Double-shielded cords block signal interference from nearby equipment and devices.

Rated IP67, these cords withstand washdowns and temporary submersion. Connect them to a USB device inside an enclosure. Shielding blocks signal interference from nearby equipment and devices. The higher the USB standard, the faster cords can transmit data. All are backward compatible, so they work with cords and connectors that meet the same or lower USB standard.

Cords with a socket mount onto a panel.

Locking-pin cords have an IP67 rating when mated or used with a cap (sold separately) on the socket end.

The insulation serves as a tough armor that protects these cords in high-traffic areas. Shielding blocks signal interference from nearby equipment and devices. They’re backward compatible, so they work with cords and connectors that meet the same or lower USB standard.

Cords with PVC armor are more lightweight than cords with stainless steel armor.

Stainless steel armor is more crush resistant than PVC armor.

These Ethernet cords are backward compatible, so they work in networks that meet the same or a lower category. They send data between computers, printers, servers, and switches.

The shielding on these cords blocks signal interference from nearby equipment and devices. They send data between computers, printers, servers, and switches. For faster data transmission speeds, choose a cord with a higher industry designation category. They’re backward compatible, so they work in networks that meet the same or a lower category.

Cords with braid and foil shielding have better protection than cords with only foil shielding, which is especially important for higher transmission speeds or longer lengths of cord. However, the added shielding increases cord diameter and reduces flexibility.

90° elbow plugs fit flush against equipment, so they fit behind machinery or in areas where space is tight.

For technical drawings and 3-D models, click on a part number.

These cords contain a single pair of twisted wires, making them lighter and more flexible than other Ethernet cords. They’re good for transportation, robotics, and automation applications. Cords have a metal locking tab to create a more secure connection than cords with RJ45 connectors, and are easier to install than coaxial cords and cords with M12 connectors. They transmit power as well as data, making them useful in places without an easily accessible power supply. These cords are shielded to block out signal interference from nearby devices.

Cords meet IEEE standards for data transmission speeds and protocols. All meet EN 60811-404 for resistance to mineral oil. They’re compliant with IEC 60332-1-2 for flame retardancy and IEC 63171-6 for single pair Ethernet cord dimensions and compatibility.

For technical drawings and 3-D models, click on a part number.

Connect computers, monitors, printers, and other devices with DB connections.

RS-232 cords transmit data between a modem and another device, such as a computer.

Parallel and serial printer cords connect a computer to a printer. Parallel cords transmit data faster than serial printer cords.

Shielded cords have foil to prevent signal interference from nearby devices. Use them in settings with low to moderate signal interference, such as labs, storage facilities, and offices.

Double-shielded cords have braid and foil for better protection against signal interference than shielded cords. However, the extra shielding adds diameter and reduces flexibility. They’re used in steel mills, machine tool plants, and other heavy processing facilities.

Cords with reversible mounting hardware have removable thumb screws to enable a wider range of mounting options than other cords. Mount them to ports and adapters, as well as directly into panels.

Transmit audio, video, and data signals over long distances with minimal signal loss.

BNC cords attach with a quarter turn.

SMA and F-Type cords screw on.

RG-174/U cords have a small diameter, so they're easy to coil.