After shutting off power to equipment during a power failure, these cords must be manually reset, preventing unexpected equipment start-up. Use them to replace three-wire power cords on equipment driven by small single-phase motors. The industry designation is SJTO, so the insulation resists oil.

Use these cords with computers, lab equipment, and office machines that have IEC connections.

Use SJT cords in dry or damp environments.

Connect devices such as computers, printers, and mobile devices. The higher the USB standard, the faster cords can transmit data. These cords are backward compatible, so they work with cords and connectors that meet the same or lower USB standard.

Use power cords to charge devices. Data cords move data between devices.

90° elbow cords fit flush against equipment so they fit in tight spaces.

Double-shielded cords block signal interference from nearby equipment and devices.

Panel-mount cords have a flange on the socket end to mount in a panel cutout. They’re great for a secure, fixed USB connection on devices like PCs, printers, or projectors that don’t need to be repositioned often.

Rated IP67, these cords withstand washdowns and temporary submersion. Connect them to a USB device inside an enclosure. Shielding blocks signal interference from nearby equipment and devices. The higher the USB standard, the faster cords can transmit data. All are backward compatible, so they work with cords and connectors that meet the same or lower USB standard.

Cords with a socket mount onto a panel.

Screw-together cords are IP67 and NEMA 4 rated when mated or used with a cap (sold separately) on the socket end.

With Kevlar-reinforced nylon armor and a high-strength aluminum connector, these USB cords stand up to frequent use and bending better than standard USB cords. Use them to move data between computers, printers, and mobile devices in places where cords may be dropped, pulled, and bent in odd directions. These cords also withstand heat and have a long, flexible strain relief for extra durability where the cable meets the connector. Cords with a higher USB standard transmit data faster than cords with a lower USB standard. Backward compatible, all work with cords and connectors that meet the same or a lower USB standard.

MFi-certified cords are compatible with Apple devices.

Pinch the sides on the USB type A plugs to insert them; they lock in place to prevent the cord from detaching. Shielding blocks signal interference from nearby equipment and devices. These cords are backward compatible, so they work with cords and connectors that meet the same or lower USB standard.

A plug × A plug cords lock on both ends.

A plug × B plug cords lock only on the type A plug end.

With a flange on the socket end, you can mount these cords in a panel cutout to move data between computers, printers, and mobile devices. Backward compatible, all work with cords and connectors that meet the same or lower USB standard.

Shielded cords protect against signal interference in environments with low-to-moderate interference such as labs, storage facilities, and offices.

Cords with an external housing thread screw into your panel and don’t require fasteners to mount.

Add a cap to protect adapters when not in use. Hinged caps open and shut quickly at a fixed angle, so they’re more convenient for frequent access than tethered caps. Tethered caps can open in any direction, letting you access adapters from any angle. IP40-rated caps have a locking mechanism for extra security.

Label holders snap onto the front of adapters.

For technical drawings and 3-D models, click on a part number.

Often used in labs, storage facilities, and offices, the shielding blocks low to moderate signal interference from nearby equipment and devices. These cords have a flange on the socket end to mount them in a panel cutout. They send data between computers, printers, servers, and switches. For faster data transmission speeds, choose a cord with a higher industry designation category. All are backward compatible, so they work in networks that meet the same or a lower category.

Screw-in cords simply thread into panel cutouts. Use them on panels that are 1.5 mm to 5 mm thick.

Add an optional cap to protect the end of screw-in cords when not in use. Hinged caps open and shut quickly at a fixed angle, so they’re more convenient for frequent access than tethered caps. Tethered caps can open in any direction, letting you access the end of the cord from any angle.

Label holders (sold separately) snap onto the end of the cords.

For technical drawings and 3-D models, click on a part number.

With an M8 plug that’s smaller than an M12 plug on one end and an RJ45 plug on the other, these cords can send data between sensors, I/O boxes, switches, and computers in tight spaces. The M8 plug is also IP67 rated, so it stands up to dust and brief submersion. All of these cords have braid and foil shielding to block signal interference from nearby equipment and devices.

For technical drawings and 3-D models, click on a part number.

Send high-definition signals to monitors, TVs, and projectors.