The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.

Designed for indoor applications, these cords are often used to power appliances.

Run power to welders in machine shops, garages, and other areas where these cords will be exposed to harsh conditions. These cords have either EPDM or PVC insulation that protects the cord's wires from weld slag and being dragged, kicked, and stepped on.

Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.

In addition to an outlet on the end, these cords have multiple inline outlets.

Keep personnel safe from electric shock with these cords.

Keep power flowing in dirty areas with rubber-insulated cords that resist oil, water, and chemicals. A locking lever on the socket prevents your device from disconnecting.

These cords have an oil- and water-resistant insulation and impact-resistant connectors for protection in harsh environments.

Attach these splitters to an extension cord to power multiple devices from one cord.

Use these cords with computers, lab equipment, and office machines that have IEC connections.

Send power from generators to keep the lights on and equipment running.

Use these unshielded cords where signal interference is not a concern.

Also known as plenum-rated cords, these CMP ethernet cords have flame-resistant, low-smoke insulation and can be used without conduit in duct work and above a drop ceiling.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.

Send high-definition signals to monitors, TVs, and projectors.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.

When mated, these connectors meet NEMA 6P for protection against washdowns and temporary submersion.

This cable can be stretched by about 40% and return to its original length, making it useful for applications where cable is in motion. It's often sewn into garments or used with equipment that must be worn.

Rated to 12 volts DC, this cable is often used in low-voltage applications such as battery and vehicle wiring and radios. Also known as GPT cable.

Often used in mining equipment, submersible pumps, and drilling rigs, this cable withstands 2,000 volts AC/DC.

Weather-resistant insulation makes this cable suitable for outdoor use and direct burial without conduit.

Often used to wire pendant switches, this cable hangs from an overhead connection. Also known as bus drop cable.

Connect devices such as sensors, programmable logic controllers, and actuators to an automated network.

This cable has twisted pairs of wires that cancel signal interference from multiple transmission lines. Use it for complex and high-speed data and signal transmission.

Send data between computers, printers, servers, and switches.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it to send data between computers, servers, and switches.

From mines and factories to robotics, this rugged Ethernet cable sends data between sensors and switches in the grimiest places.

Send data between data centers and workstations in fiber-optic networks.

Rated for in-wall installation, this cable carries power to wall outlets. Also known as branch circuit wire.

This cable has an uninsulated ground wire that touches the protective metal armor so it can be used for bonding and grounding. It's often used along the exterior of walls to carry power to outlet boxes. Also known as AC cable.

Connect low-current circuits such as intercoms and security systems to a building's electrical system in single-level facilities.

This cable is approved for use in vertical shafts and large facilities with multiple levels. It's often used for low-current circuits such as intercoms and security systems.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use in critical circuits such as fire alarms and smoke detectors.

Keep water from damaging wires—this cable has a layer of absorbent material that traps moisture before it reaches the internal wires. It sends signal and data to operate, measure, or regulate automated equipment.

Approved for flame resistance, this cable meets Mine Safety and Health Administration (MSHA) standards. The insulation resists abrasion and chemicals.