Step on or roll carts and platform trucks over these M12 cords without crushing them. A protective layer of stainless steel makes these the most crush- and abrasion-resistant M12 cords we offer. It also prevents damage from pests that chew through cords. The stainless steel and PVC outer layer keep moisture from corroding the cord, so they can be used outdoors and near chemicals as well. Despite the stainless steel covering, these cords are still flexible enough to route around equipment. Threaded ends create a tight connection that seals out contaminants and won’t shake loose from the vibration of automated machines.

These cords have a standardized code layout to reduce the chances of accidentally mis-mating them. All are A-coded to send signal and power to AC and DC devices. A-coded cords are often used with sensors, actuators, and motors in automated systems. They also connect devices to IO Link controllers and within fieldbus systems, such as Profibus and DeviceNet.

When mated or capped, these cords meet IP ratings. IP67 cords withstand temporary submersion. IP69 cords are protected from dust and high-pressure, high-temperature washdowns.

Add caps to protect connectors and maintain their IP ratings when not in use.

Note: Sockets may have extra holes on the face that are not used.

With a higher maximum current than nano M8 and micro M12 cords, these mini cords are often used with automated systems, motors, and pumps. A threaded housing securely mates with other mini connections and won’t shake loose from vibration. They have a standard pole layout and housing thread size to reduce the chance you’ll mis-mate connectors. These cords are unshielded, so they’re best for use where signal interference is not a concern.

When mated, these cords meet IP ratings for protection from dust and temporary submersion.

Thread adapters connect plugs and sockets that both have internal threads.

Caps protect connectors and maintain their IP ratings when not in use.

Also known as pico cords, these cords are often used with low-current 8 mm proximity and photoelectric switches.

Cords with polyurethane insulation bend easily, so they are ideal for applications that require continuous flexibility such as robotics. They also resist oil.

Cords with 90° elbow plugs and sockets fit flush against equipment, so they fit in tight spaces.

All are rated IP67 for protection from dust and temporary submersion. Cords rated IP66K also protect against washdowns.

Send signal and power to low-current devices with M8 connections near welding, metal machining, and in spots where temperatures change. These cords stand up to chemicals, oil, weld slag, and other tough industrial stresses thanks to a layer of TPE. They’re flame rated FT4, so they meet requirements for preventing the spread of flames. Also known as pico cords, M8 cords are often used with 8 mm and smaller proximity switches and photoelectric switches. These cords are good for robotics and other jobs with continuous motion because TPE bends easily.

All are rated IP66K and IP67 when mated for protection against dust, temporary submersion, and high-pressure washdowns. UL and C-UL listed, they meet American and Canadian safety standards.

Often used in automation systems such as conveyors and sorters, these cords have plug and socket ends, so they quickly connect and disconnect for maintenance and do not need to be hardwired. Because these cords carry higher currents than micro and mini cords, they can power equipment such as motors, fans, pumps, and automated machine tools. They are shielded to block out interference from nearby equipment. These cords meet UL 2237 and UL 2238, so they can be used in motor branch circuits of industrial machinery. They also meet TC-ER crush and impact requirements for exposed runs in cable carriers. IP rated, they protect against dust, washdowns, and temporary submersion.

Connect these cords to control cabinets and equipment with M29 power receptacles (sold separately).

Like a tree trunk connecting to branches, these cords supply power to a chain of devices. Send power to high-amperage motors, robotic arms, and other machines in motor controls, conveyors, and sorting and packaging systems. All quickly connect and disconnect for easy installation and maintenance.

UL and C-UL listed, these cords meet American and Canadian safety standards. They comply with TC-ER requirements, so they withstand being hit and crushed when exposed. Their inner and outer insulation resist oil and water as well, thanks to their STOOW rating. IP and NEMA rated when connected, these cords resist corrosion and seal out dust and water from weather and washdowns. You can even safely submerse them for brief periods of time.

Attach M35 connectors or M22 cords and connectors to extend your power line and reach more devices in your system. Connecting tees link multiple pieces of equipment with M35 connections. Reducing tees join equipment with M35 connections to equipment with M22 connections.

Add a cap to protect these cords from dust when they’re not in use.

Optional locking clips stop your cord from coming loose when powering equipment that carries high amperage.

Similar to branches extending from a tree, these cords disperse power from a main power line to run a chain of devices. Power high-amperage fans, pumps, and other machines in motor controls, conveyors, and sorting and packaging systems. All quickly connect and disconnect for easy installation and maintenance.

These cords are UL and C-UL listed, so they meet American and Canadian safety standards. They comply with TC-ER requirements, meaning they withstand being hit and crushed when exposed. An STOOW rating means their inner and outer insulation resist oil and water. IP and NEMA rated when connected, these cords resist corrosion and seal out dust and water from weather and washdowns. They can even be under water for brief periods of time.

Lengthen your power line and reach more devices in your system by adding M22 connectors or M35 cords and connectors. Reducing tees join equipment with M22 connections to equipment with M35 connections.

Add a cap to protect these cords from dust when they’re not in use.

Optional locking clips stop your cord from coming loose when used with equipment that carries high amperage.

The M12 threaded ends on these cords seal out contaminants and resist coming loose from vibration better than the RJ45 ends on traditional Ethernet cords. Use them in tough, rugged environments to send high-speed data between sensors, switches, servers, computers, and PLCs not protected by control panels. These cords can power devices as they send data, as long as devices are Power over Ethernet (PoE) compatible. They are often used within Ethernet/IP, Profinet, and EtherCat systems. Their poles and keyways adhere to standard coding layouts, reducing the chance you’ll mismatch connections.

All cords are backward compatible, so they work in networks that meet the same or lower ethernet cable category. For example, a Category 6 cord will work in a Category 5 network, but it will only run at the Category 5 speed.

A- and X-coded cords send data faster than D-coded cords, so they’re good for robotics and multi-step programs.

With either TPE or polyurethane insulation, all cords stand up to harsh factory conditions, chemicals, and UV rays. All are also highly flexible, so they’re good for jobs with continuous motion, such as robotics. TPE-insulated cords resist abrasion and won’t pit or crack from welding runoff.

Use unshielded cords where signal interference is not a concern. Double-shielded cords have layers of braid and foil that block signal interference from nearby devices, preventing impact to transmission speeds and data.

90° elbow cords sit flush against equipment, so they fit behind machinery in areas where space is tight.

When mated, all cords are IP67 rated to protect against dust and temporary submersion. IP65-rated cords stand up to washdowns. IP66K-rated cords stand up to high-pressure washdowns.

Add caps to protect cords and maintain their IP ratings when not in use.

To send high-speed data in tough, rugged environments, these cords have an M12 connector on one end that threads onto switches, sensors, and other devices prone to vibration. The other end has a traditional RJ45 plug that connects to Ethernet equipment, such as computers, IO modules, and programmable logic controllers (PLCs). These cords can also power devices as they send data, so you don’t need a separate power cord. But, the device must be Power over Ethernet (PoE) compatible. They’re often used with EtherNet/IP, Profinet, and EtherCAT systems. With TPE insulation, they stand up to bending in robotics applications. It also means they resist abrasion and won’t pit or crack from chemicals, sunlight, and welding runoff.

Thanks to its threads and IP rating, the M12 end is water and dust tight when mated. Poles and keyways on its face adhere to standard coding layouts, which reduces the chance of mismatching connections.

When choosing an Ethernet cord, make sure you match or exceed your network’s ethernet cable category. These cords are backward compatible—for example, a Category 6 cord will work in a Category 5 network, but it’ll only run at the Category 5 speed.

A- and X-coded cords send data faster than D-coded cords, so they’re best for systems that run multi-step programs, such as robotics.

Use unshielded cords where signal interference is not a concern. Double-shielded cords have layers of braid and foil that block signal interference from nearby devices, maintaining their speed and data integrity.

Cords with a 90° elbow run along the side of equipment, so they fit behind machines and in tight spaces.

Add caps to protect connectors and maintain their IP rating when not in use.

Send high-speed data between sensors, switches, or I/O modules with an M8 connection and programmable logic controllers (PLCs) and computers with a traditional RJ45 connection. Braided and foil shielding blocks signal interference from nearby equipment. And with a polyurethane insulation that bends easily, these cords are ideal for applications that continuously flex such as robotics. They also resist oil. The M8 end is rated IP67 when mated, so it keeps out dust and water from temporary submersion.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission. They have braided metal shielding, which reduces signal interference from nearby equipment and devices. All are backward compatible, so they work with cords and connectors that meet the same or lower USB standard.