We will reply to your message within an hour.
More
The insulation on these cords resists water, so they can be used outdoors.
The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.
Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.
Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.
Use these cords where ignitable gas and dust may be present. They're CSA certified for Class I, Divisions 1 and 2, Groups B, C, and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.
Power multiple devices with one extension cord.
Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.
In addition to an outlet on the end, these cords have multiple inline outlets.
Keep personnel safe from electric shock with these cords.
A locking lever on the female socket prevents your device from disconnecting.
Give the connectors on these cords a quarter turn to lock in place.
The shielding blocks signal interference from nearby equipment and devices.
Use these unshielded cords where signal interference is not a concern.
Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission. They have an RJ45 plug on each end.
Connect computers, monitors, printers, and other devices with DB connections.
Transmit audio, video, and data signals over long distances with minimal signal loss.
Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.
Connect audio to a single speaker, or extend the distance between stereo audio devices.
When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.
When mated, these connectors meet NEMA 6P for protection against washdowns and temporary submersion.
Use this general purpose cable to supply power to equipment.
The insulation resists corrosive chemicals and salt water, and the wires in this cable are tin plated for corrosion resistance.
A braided bronze armor provides excellent protection against abrasion and other damage. The wires are tin-plated for corrosion resistance, and the insulation resists corrosive chemicals and salt water.
A thick rubber insulation resists cuts and abrasion, so this cable can be pulled over rough surfaces without damaging the wires inside.
Rated to 12 volts DC, this cable is often used in low-voltage applications such as battery and vehicle wiring and radios. Also known as GPT cable.
For high-heat applications such as furnaces and ovens, this cable's insulation withstands temperatures of 390° F and higher.
Often used in mining equipment, submersible pumps, and drilling rigs, this cable withstands 2,000 volts AC/DC.
Weather-resistant insulation makes this cable suitable for outdoor use and direct burial without conduit.
Also known as zip cord, this cable is often used in lamps, heat guns, and other small appliances.
Often used to wire pendant switches, this cable hangs from an overhead connection. Also known as bus drop cable.
Connect devices such as sensors, programmable logic controllers, and actuators to an automated network.
Send data between computers, servers, and switches in an office or workstation.
Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it to send data between computers, servers, and switches.
Often used in automated applications that require continuous motion, this cable sends data between computers, servers, and switches without degrading signal transmission.
Transmit data in rough industrial applications. This cable has an oil-resistant insulation.
Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. It has an oil-resistant insulation to protect wires as the cable moves from duct to equipment or machinery.
Use this cable for complex and high-speed data and signal transmission.
Often used to send signal and data to order pickers and cranes, this cable withstands continuous motion applications without degrading data or signal transmission.
This cable has twisted pairs of wires that cancel signal interference from multiple transmission lines. Use it for complex and high-speed data and signal transmission.
Often used in radio transmission, network connections, and digital audio feed, this cable transmits audio, video, and data signals.
Hook up speakers, intercoms, and other low-current devices to a building's communication wiring.
Connect telephones and telephone blocks to a wall jack.
Often used in automated applications such as robotics and cable carriers, this cable withstands continuous motion without degrading data or signal transmission.
The insulation has excellent resistance to oil, so this cable can be used near motors. Often used in automated applications, it withstands continuous motion without degrading data or signal transmission
In addition to handling continuous movement, this cable withstands twisting up to 450° without degrading data or signal transmission. It's often used in welding robots and rotary tables.
Use this cable without conduit in automated applications—it meets crush and impact requirements for exposed runs in cable carriers, and withstands continuous motion without degrading data or signal transmission.
A thick outer layer of silicone rubber insulation protects this cable from high voltages while remaining ultra flexible. It stands up to continuous motion without degrading data or signal transmission.
With a life span of more than 20 million high-speed flex cycles, this cable lasts twice as long as standard continuous-flex cable. The frequent motion will not degrade data or signal transmission.
Connect servocontrollers and servomotors in automated equipment and on assembly lines. This cable withstands continuous motion without degrading data or signal transmission.
For use in tight spaces, this cable has up to a 40% smaller OD than standard continuous-flex cable. It withstands continuous motion without degrading data or signal transmission.
This cable meets TC-ER crush and impact requirements for exposed runs in cable trays, so it can be used without conduit. It sends signal and data to operate, measure, or regulate automated equipment.
Send signal and data to operate, measure, or regulate automated equipment such as conveyors and CNC machines.
This cable is used in variable-frequency drive motors. It has shielding to block signal interference caused by voltage fluctuations and current spikes.
Also known as festoon cable, this flat cable fits in confined spaces such as overhead cranes and hoists. It sends signal and data to operate, measure, or regulate automated equipment.
Keep water from damaging wires—this cable has a layer of absorbent material that traps moisture before it reaches the internal wires. It sends signal and data to operate, measure, or regulate automated equipment.
Nearly two-thirds the diameter of standard control cable, this cable fits in tight spaces. It sends signal and data to operate, measure, or regulate automated equipment.
Rated for in-wall installation, this cable carries power to wall outlets. Also known as branch circuit wire.
The metal armor on this cable acts as conduit to protect the internal wires. It's often used along the exterior of walls to carry power to outlet boxes. Also known as MC cable.
This cable has an uninsulated ground wire that touches the protective metal armor so it can be used for bonding and grounding. It's often used along the exterior of walls to carry power to outlet boxes. Also known as AC cable.
Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it in low-current circuits such as intercoms and security systems.
Connect low-current circuits such as intercoms and security systems to a building's electrical system in single-level facilities.
This cable is approved for use in vertical shafts and large facilities with multiple levels. It's often used for low-current circuits such as intercoms and security systems.
Hook up thermostats, air-conditioning units, and other low-voltage equipment.
This cable is approved for use in vertical shafts and large facilities with mulitple levels for critical circuits such as fire alarms and smoke detectors.
Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use in critical circuits such as fire alarms and smoke detectors.
This cable withstands abrasion, oil, and the rough conditions found in welding applications.
Approved for flame resistance, this cable meets Mine Safety and Health Administration (MSHA) standards. The insulation resists abrasion and chemicals.
Extend the reach of your thermocouple probe—plug-in connectors on both ends of this wire speed up installation.