Also known as pico cords, these cords are often used with low-current 8 mm proximity and photoelectric switches.

Cords with 90° elbow plugs and sockets fit flush against equipment, so they fit in tight spaces.

All are rated IP67 for protection from dust and temporary submersion. Cords rated IP66K also protect against washdowns.

For technical drawings and 3-D models, click on a part number.

Use these cords with hydraulic and air-powered valves, motors, pumps, and pressure switches. They have a solenoid valve socket on one end and an M12 threaded plug on the other. The ground connection is not included in the number of poles. A power-indicating light on the socket illuminates when the cord has power. All are IP-rated for protection from washdowns and temporary submersion.

An isolated ground connection protects computers and other sensitive equipment from external signals that interfere with the equipment’s performance. A circuit breaker prevents damage from current overload and short circuits. Surge suppression protects devices from voltage spikes. The surge rating indicates how much energy the outlet strip can absorb before it needs to be replaced; the higher the number, the better the protection.

Mount these outlet strips to a desktop or workbench with the mounting hardware, or set them on a surface. The outlets have internal shutters to prevent the insertion of foreign objects. These outlet strips have a 90° elbow plug that fits flush against a wall outlet, so they fit behind machinery or in areas where space is tight. The plug also has an outlet on the back to connect equipment. Use the USB ports to charge mobile devices.

Often used in labs, storage facilities, and offices, the shielding blocks low to moderate signal interference from nearby equipment and devices. These cords have a flange on the socket end to mount them in a panel cutout. They send data between computers, printers, servers, and switches. For faster data transmission speeds, choose a cord with a higher ethernet cable category. All are backward compatible, so they work in networks that meet the same or a lower category.

Screw-in cords simply thread into panel cutouts. Use them on panels that are 1.5 mm to 5 mm thick.

Add an optional cap to protect the end of screw-in cords when not in use. Hinged caps open and shut quickly at a fixed angle, so they’re more convenient for frequent access than tethered caps. Tethered caps can open in any direction, letting you access the end of the cord from any angle.

Label holders (sold separately) snap onto the end of the cords.

For technical drawings and 3-D models, click on a part number.

Connect devices such as computers, printers, and mobile devices. The higher the USB standard, the faster cords can transmit data. These cords are backward compatible, so they work with cords and connectors that meet the same or lower USB standard.

Use power cords to charge devices. Data cords move data between devices.

90° elbow cords fit flush against equipment so they fit in tight spaces.

Double-shielded cords block signal interference from nearby equipment and devices.

Panel-mount cords have a flange on the socket end to mount in a panel cutout. They’re great for a secure, fixed USB connection on devices like PCs, printers, or projectors that don’t need to be repositioned often.

Rated IP67, these cords withstand washdowns and temporary submersion. Connect them to a USB device inside an enclosure. Shielding blocks signal interference from nearby equipment and devices. The higher the USB standard, the faster cords can transmit data. All are backward compatible, so they work with cords and connectors that meet the same or lower USB standard.

Cords with a socket mount onto a panel.

Locking-pin cords are IP67 and NEMA 6P rated when mated or used with a cap (sold separately) on the socket end.