About Nuts, Materials, and Finishes
More
Super-Corrosion-Resistant 316 Stainless Steel Coupling Nuts
These coupling nuts have excellent resistance to chemicals and salt water. Also known as extension nuts, use them to connect and extend threaded rods. They may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
Plastic Coupling Nuts
These nylon 6/6 coupling nuts are chemical resistant, nonconductive, and lightweight. Also known as extension nuts, use them to connect and extend threaded rods.
For technical drawings and 3-D models, click on a part number.
Temperature Range, °F | Each | ||||||||
---|---|---|---|---|---|---|---|---|---|
Thread Size | Lg. | Wd. | Threading | Min. | Max. | Color | 1-9 | 10-Up | |
Nylon 6/6 Plastic | |||||||||
4-40 | 3/8" | 1/4" | Fully Threaded | Not Rated | 250° | Off-White | 0000000 | 00000 | 00000 |
Corrosion-Resistant Extension Springs with Hook Ends
Made of stainless steel, these springs are more corrosion resistant than steel springs. They're also easier to extend than steel springs. As you stretch an extension spring, it gets harder to pull. Minimum load is the amount of force required to start to extend the spring. Maximum load is the amount of force required to fully extend the spring. Spring rate is the amount of force required for every inch of extension or, for metric springs, millimeter of compression.
302 stainless steel springs have good corrosion resistance.
316 stainless steel springs have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Load, lbs. | |||||||||
---|---|---|---|---|---|---|---|---|---|
OD | Wire Dia. | Extended Lg. @ Max. Load | Min. | Max. | Spring Rate, lbs./in. | Material | Pkg. Qty. | Pkg. | |
0.375" Lg. | |||||||||
0.063" | 0.008" | 0.745" | 0.04 | 0.45 | 1.1 | 316 Stainless Steel | 3 | 0000000 | 000000 |
0.063" | 0.011" | 0.551" | 0.1 | 1.14 | 5.9 | 316 Stainless Steel | 3 | 0000000 | 00000 |
0.078" | 0.008" | 0.973" | 0.04 | 0.39 | 0.59 | 316 Stainless Steel | 3 | 000000 | 00000 |
0.078" | 0.011" | 0.671" | 0.09 | 1.03 | 3.17 | 316 Stainless Steel | 3 | 0000000 | 00000 |
0.094" | 0.01" | 0.673" | 0.05 | 0.36 | 0.104 | 302 Stainless Steel | 1 | 00000000 | 0000 |
0.094" | 0.012" | 0.559" | 0.1 | 0.61 | 2.78 | 302 Stainless Steel | 1 | 00000000 | 0000 |
0.094" | 0.012" | 0.655" | 0.1 | 1 | 3.2 | 316 Stainless Steel | 3 | 0000000 | 00000 |
0.094" | 0.014" | 0.5" | 0.17 | 0.96 | 6.17 | 302 Stainless Steel | 1 | 00000000 | 0000 |
0.094" | 0.016" | 0.521" | 0.19 | 2.26 | 14.2 | 316 Stainless Steel | 3 | 000000 | 00000 |
0.109" | 0.012" | 0.77" | 0.09 | 0.92 | 2.1 | 316 Stainless Steel | 3 | 0000000 | 00000 |
0.109" | 0.014" | 0.659" | 0.13 | 1.46 | 4.69 | 316 Stainless Steel | 3 | 0000000 | 00000 |
Extension Springs with Loop Ends
As you stretch an extension spring, it gets harder to pull. Minimum load is the amount of force required to start to extend the spring. Maximum load is the amount of force required to fully extend the spring. Spring rate is the amount of force required for every inch or millimeter of extension.
For technical drawings and 3-D models, click on a part number.
Load, lbs. | |||||||||
---|---|---|---|---|---|---|---|---|---|
OD | Wire Dia. | Extended Lg. @ Max. Load | Min. | Max. | Spring Rate, lbs./in. | Material | Pkg. Qty. | Pkg. | |
0.375" Lg. | |||||||||
0.063" | 0.007" | 0.93" | 0.03 | 0.32 | 0.5 | Music-Wire Steel | 5 | 00000000 | 000000 |
0.063" | 0.008" | 0.75" | 0.04 | 0.45 | 1.1 | Music-Wire Steel | 5 | 00000000 | 00000 |
0.063" | 0.009" | 0.65" | 0.06 | 0.62 | 2.1 | Music-Wire Steel | 5 | 00000000 | 00000 |
0.063" | 0.011" | 0.55" | 0.1 | 1.09 | 5.9 | Music-Wire Steel | 5 | 00000000 | 00000 |
0.094" | 0.01" | 0.84" | 0.05 | 0.6 | 1.2 | Music-Wire Steel | 5 | 00000000 | 00000 |
0.094" | 0.011" | 0.72" | 0.06 | 0.7 | 1.9 | Music-Wire Steel | 5 | 00000000 | 00000 |
0.094" | 0.012" | 0.66" | 0.1 | 1 | 3.2 | Music-Wire Steel | 5 | 00000000 | 00000 |
0.094" | 0.013" | 0.6" | 0.1 | 1.15 | 4.6 | Music-Wire Steel | 5 | 00000000 | 00000 |
0.094" | 0.014" | 0.57" | 0.17 | 1.5 | 7.1 | Music-Wire Steel | 5 | 00000000 | 00000 |
0.094" | 0.016" | 0.52" | 0.19 | 2.15 | 14.2 | Music-Wire Steel | 5 | 00000000 | 00000 |
0.12" | 0.016" | 0.57" | 0.2 | 1.6 | 7.9 | Music-Wire Steel | 5 | 00000000 | 00000 |
0.12" | 0.018" | 0.52" | 0.2 | 2.2 | 14.4 | Music-Wire Steel | 5 | 00000000 | 00000 |
Corrosion-Resistant Extension Springs with Loop Ends
Made of stainless steel, these springs are more corrosion resistant than steel springs. They're also easier to extend than steel springs. As you stretch an extension spring, it gets harder to pull. Minimum load is the amount of force required to start to extend the spring. Maximum load is the amount of force required to fully extend the spring. Spring rate is the amount of force required for every inch or millimeter of extension.
302 stainless steel springs have good corrosion resistance.
316 stainless steel springs have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Load, lbs. | |||||||||
---|---|---|---|---|---|---|---|---|---|
OD | Wire Dia. | Extended Lg. @ Max. Load | Min. | Max. | Spring Rate, lbs./in. | Material | Pkg. Qty. | Pkg. | |
0.375" Lg. | |||||||||
0.063" | 0.008" | 0.75" | 0.03 | 0.37 | 0.916 | 302 Stainless Steel | 3 | 0000000 | 000000 |
0.063" | 0.009" | 0.65" | 0.05 | 0.52 | 1.749 | 302 Stainless Steel | 3 | 00000000 | 00000 |
0.094" | 0.01" | 0.57" | 0.04 | 0.23 | 1 | 316 Stainless Steel | 2 | 00000000 | 00000 |
0.094" | 0.01" | 0.84" | 0.04 | 0.5 | 1 | 302 Stainless Steel | 3 | 00000000 | 00000 |
0.094" | 0.011" | 0.54" | 0.05 | 0.31 | 1.583 | 316 Stainless Steel | 2 | 00000000 | 00000 |
0.094" | 0.011" | 0.72" | 0.05 | 0.58 | 1.583 | 302 Stainless Steel | 3 | 00000000 | 00000 |
0.094" | 0.012" | 0.66" | 0.08 | 0.83 | 2.666 | 302 Stainless Steel | 3 | 00000000 | 00000 |
0.094" | 0.013" | 0.6" | 0.08 | 0.96 | 3.832 | 302 Stainless Steel | 3 | 00000000 | 00000 |
0.094" | 0.014" | 0.47" | 0.14 | 0.65 | 5.914 | 316 Stainless Steel | 2 | 00000000 | 00000 |
0.094" | 0.016" | 0.52" | 0.16 | 1.79 | 11.829 | 302 Stainless Steel | 3 | 00000000 | 00000 |
0.109" | 0.014" | 0.478" | 0.11 | 0.51 | 4.69 | 316 Stainless Steel | 1 | 00000000 | 0000 |
0.12" | 0.016" | 0.47" | 0.17 | 0.75 | 6.581 | 316 Stainless Steel | 2 | 00000000 | 00000 |
0.12" | 0.016" | 0.57" | 0.17 | 1.33 | 6.581 | 302 Stainless Steel | 5 | 00000000 | 00000 |
0.12" | 0.018" | 0.52" | 0.17 | 1.83 | 11.995 | 302 Stainless Steel | 5 | 0000000 | 00000 |