About Lifting with Hoist Rings
More
Eyebolts—For Lifting
Zinc-plated steel eyebolts offer good corrosion resistance.
Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings. Eyebolts without shoulder are for vertical lifting only.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Thread | With Shoulder | Without Shoulder | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Lg. | Shank Lg. | Eye Dia. | Vertical Capacity, lbs. | Specifications Met | Overall Lg. | Each | Overall Lg. | Each | ||
Steel | |||||||||||
| 1 3/4"-5 | 3 3/4" | 3 3/4" | 3" | 28,000 | ASTM A489 | 11 1/8" | 0000000 | 0000000 | 9 3/4" | 0000000 | 0000000 |
Zinc-Plated Steel | |||||||||||
| 1 3/4"-5 | 3 3/4" | 3 3/4" | 3" | 28,000 | ASTM A489 | 11 1/8" | 00000000 | 000000 | 9 3/4" | 00000000 | 000000 |
Swivel-Under-Load Hoist Rings—For Lifting
The ball bearing on these hoist rings makes it easy to rotate your load even after it’s suspended. For unbalanced or heavy loads, the base also swivels to compensate for pitch, roll, and sway. Their lifting ring pivots 180° front to back. Ideal for angular lifting, these hoist rings withstand stresses that bend or break eyebolts.
Install the base of these hoist rings flush to your mounting surface. Use a torque wrench to tighten to the recommended torque stamped on the ring.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Thread Lg. | Inside Wd. | Overall Ht. | Vertical Capacity, lbs. | Movement | Specifications Met | Each | |
Yellow Powder-Coated Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1 3/4"-5 | 2 5/8" | 2 3/4" | 13 1/4" | 28,210 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked | 0000000 | 0000000 |