About Lifting with Hoist Rings
More
Eyebolts—For Lifting
Also known as machinery eyebolts.
Zinc-plated steel eyebolts offer good corrosion resistance.
Galvanized steel eyebolts have a hot-dipped finish for more corrosion resistance than zinc-plated steel.
316 stainless steel are the most corrosion resistant eyebolts.
Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Thread | With Shoulder | ||||||||
|---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Lg., mm | Shank Lg., mm | Overall Lg., mm | Eye Dia., mm | Vertical Capacity, lbs. | Specifications Met | Each | |
Steel | |||||||||
| M36 | 4 | 72 | 72 | 223 | 63 | 19,750 | __ | 0000000 | 000000 |
Zinc-Plated Steel | |||||||||
| M36 | 4 | 54 | 54 | 182 | 70 | 10,125 | DIN 580 | 0000000 | 00000 |
Galvanized Steel | |||||||||
| M36 | 4 | 89 | 89 | 241 | 63 | 19,750 | __ | 0000000 | 00000 |
316 Stainless Steel | |||||||||
| M36 | 4 | 54 | 54 | 182 | 70 | 10,125 | DIN 580 | 0000000 | 000000 |
Rotating Eyebolts—For Lifting
Unlike conventional eyebolts, you can rotate the eye 360° to match the angle of your load.
Powder-coated steel eyebolts are impact resistant, but less corrosion resistant than stainless steel eyebolts. They include a removable key for tightening the bolt.
Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Thread | With Shoulder | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Lg., mm | Shank Lg., mm | Overall Lg., mm | Eye Dia., mm | Vertical Capacity, lbs. | Color | Each | |
Powder-Coated Steel | |||||||||
| M36 | 4 | 54 | 54 | 190 | 73 | 15,400 | Pink | 00000000 | 0000000 |
Eye Nuts—For Lifting
Create your own lifting eye by adding an eye nut to a stud or bolt.
304 stainless steel eye nuts are more corrosion resistant than galvanized steel.
Note: Capacity applies to the eye nut only. The stud or bolt you use will affect the overall capacity. Eye nuts are for vertical lifting only.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Hoist Rings—For Lifting
Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque Wrenches are sold separately.
Black-oxide steel offers mild corrosion resistance.
Hoist rings that are CE marked meet European requirements for health, safety, and environmental protection.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Thread Pitch, mm | Thread Lg., mm | Inside Wd., mm | Overall Ht., mm | Vertical Capacity, lbs. | Movement | Specifications Met | Each | |
Forged Black-Oxide Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| M36 | 4 | 67 | 101 | 302 | 24,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 0000000 |