Also known as machinery eyebolts.

Unlike conventional eyebolts, you can rotate the eye 360° to match the angle of your load.

The matte black-oxide finish won't reflect light, allowing the eyebolts to blend into the background.

Also known as nut eyebolts, these are designed for through-hole applications.

Also known as screw eyes, use the sharp point of these eyebolts to mount directly into wood.

Use these to adjust the position of a fitting or an object under load and minimize twisting and knotting.

These rotate for easy positioning before a load is applied to minimize twisting and knotting of rope and chain.

Adjust the position of a fitting or an object under load and minimize twisting and knotting.

Made to meet stringent military standards, the fittings on these lanyards meet MS 20668 and MS 21259.

Also known as socket-end swage fittings, install these eye-end fittings with a roller swage press for a strong, permanent hold.

Install these eye-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Press these grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

The extended neck on the washer of these grommets adds reinforcement so you can use them in thicker material such as woven fabrics. Press them into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

The sharp neck on these grommets cuts the material as you press them into place, eliminating the need for a cutting punch. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Push these flexible grommets into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

Cut the thin layer of rubber in the center of these grommets to create custom IDs to securely hold and protect wire, cable, and cords. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration. Also known as webbed grommets.

The center hole has flaps that flex to hold and protect various sizes of wire, cable, and cords while keeping out dust and debris. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes.

The center hole has flaps that flex to hold and protect various sizes of wire, cable, and cords while keeping out dust and debris. Snap these grommets into place and their wings expand against the sides of the hole to lock them in position. Use them to turn rough-edged and uneven holes into smooth holes.

Press these flexible grommets into holes and their tapered inner wall will expand when pipe or tubing is inserted to hold them snugly in place. They're often used for routing applications on metal, plastic, and fiberglass tanks.

Create a sanitary seal on through-wall piping, tubing, and cables in food-, cosmetic-, and pharmaceutical-processing areas.

Apply heat and these grommets shrink around wire, cable, and cords to keep out dust, debris, and moisture.

Snap these grommets into place to hold wire, cable, and cords in wet locations and form a seal against dust, debris, and water.

Squeeze these flexible grommets to open the center flap—once wire, cable, and cords pass through, the flap closes tightly for dust and debris protection as well as a finished look. Use them to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Wire, cable, and cords pass through the grommet opening while the bristles fill in the gaps to control dust and debris. Use these grommets to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Also known as pad eyes, these rigid rings provide a strong, fixed anchor point.

Accommodate ties in any direction with these rings that swivel all the way around and pivot 180°.

Accommodate ties in any direction with these rings that swivel all the way around.

These rings mount flush and fold down when not in use to eliminate obstructions.

Adhesive on the back holds these rings in place.

These rings pivot to secure loads in various directions.

Also known as shoulder washers.

As you tighten your screw, the rolled collar compresses under the head to create an insulating barrier between a screw shank and a mating surface.

These female snap halves create the finished button-look of a snap. Pair them with male snap halves to create a complete snap.

Once installed, these fasteners provide a female snap half on one side of your fabric and a male snap half on the other.

Kits include a hand punch tool with die and six complete snaps.

Everything you need to fasten a fabric snap to a solid surface.

Kits include a hand punch tool with die and six complete snaps with tapping screw studs.

The drilling screw stud drills its own hole.

Create an eyelet for turn-button fastener bases.

Press these grommets into a hole to add cushion on both sides.

Ribbed grommets are more flexible than our smooth vibration-damping grommets, so they're easier to install.