Thigh Buckle Style Thigh Buckle Style |
|---|
 |  |
| Slide | Traditional |
Harness Type Harness Type |
|---|
|
Component Component |
|---|
|
Harness Style Harness Style |
|---|
|
Harness Material Harness Material |
|---|
|
Anchor Point Attachment Style Anchor PointAttachment Style |
|---|
 |  |
| Hook Over | Wraparound |
Length After Fall Length After Fall |
|---|
|
Material Material |
|---|
|
For Height (Text) For Height (Text) |
|---|
|
|
Fall-Arrest Harnesses
Harnesses have a D-ring that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
Polyester/elastomer harnesses expand and contract with your movements.
For comfortable wear, female harnesses have friction buckle shoulders to keep side straps off the chest. A padded back and side hip straps take weight off the hip for additional support.
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Size | For Height | For Weight, lbs. | Waist Size | Specifications Met | Features | Each | |
Front-Buckle Harness with Slide Thigh Buckle | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 400 | Polyester/Elastomer | Back (1) | XXS/XS | 4’8"-5’5" | 80-130 | 24" to 32" | ANSI A10.32 | Padded Back | 0000000 | 0000000 |
| 400 | Polyester/Elastomer | Back (1) | S/M | 4’10”-5’10” | 100-190 | 30" to 42" | ANSI A10.32 | Padded Back | 0000000 | 000000 |
| 400 | Polyester/Elastomer | Back (1) | One Size Fits All | __ | __ | 36" to 52" | ANSI A10.32 | Padded Back | 0000000 | 000000 |
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Size | For Height | For Weight, lbs. | Waist Size | Specifications Met | Each | |
Pullover Harness with Traditional Thigh Buckle | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 400 | Polyester | Back (1); Chest (1) | One Size Fits All | __ | __ | 32" to 48" | ANSI Z359.1 | 0000000 | 0000000 |
Front-Buckle Harness with Traditional Thigh Buckle | |||||||||
| 400 | Polyester | Back (1) | M/L | 5'4"-6'5" | 150-225 | 32" to 48" | ANSI Z359.1 | 00000000 | 00000 |
| 400 | Polyester/Elastomer | Back (1) | One Size Fits All | __ | __ | 36" to 52" | ANSI Z359.1 | 0000000 | 000000 |
Front-Buckle Harness with Slide Thigh Buckle | |||||||||
| 400 | Polyester | Back (1) | M/L | 5'4"-6'5" | 150-225 | 32" to 48" | ANSI Z359.1 | 0000000 | 00000 |
| 400 | Polyester/Elastomer | Back (1) | One Size Fits All | __ | __ | 36" to 52" | ANSI Z359.1 | 0000000 | 000000 |
Heat-Resistant Fall-Arrest Harnesses
Made of heat-resistant Nomex, these harnesses withstand temperatures up to 700° F. They have a D-ring on the back that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
| Harness Material | D-Ring Location (No. of) | Size | For Height | For Weight, lbs. | Max. Temperature, ° F | Specifications Met | Each | |
Front-Buckle Harness with Slide Thigh Buckle | ||||||||
|---|---|---|---|---|---|---|---|---|
| Nomex | Back (1) | S | 4’10”-5’10” | 100-160 | 700° | ANSI Z359.11 | 00000000 | 0000000 |
| Nomex | Back (1) | M/L | 5’-6’2” | 180-260 | 700° | ANSI Z359.11 | 00000000 | 000000 |
| Nomex | Back (1) | XL | 5’2”-6’2” | 280-320 | 700° | ANSI Z359.11 | 00000000 | 000000 |
Electrical Arc Flash-Resistant Fall-Arrest Harnesses
These harnesses have leather-insulated metal components and meet ASTM F887 when used with an arc flash-resistant lanyard. They have a D-ring on the back that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Size | Waist Size | Specifications Met | Each | |
Front-Buckle Harness with Slide Thigh Buckle | |||||||
|---|---|---|---|---|---|---|---|
| 400 | Kevlar | Back (1) | XL | 32" to 56" | ANSI Z359.1, ASTM F887 | 000000 | 0000000 |
Fall-Arrest Harnesses for Positioning
D-rings on each hip provide a stable working position. Harnesses have a D-ring on the back that attaches to a lanyard for fall protection. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
Polyester/elastomer harnesses expand and contract with your movements.
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Size (Waist) | For Height | For Weight, lbs. | Specifications Met | Each | |
Front-Buckle Harness with Traditional Thigh Buckle | ||||||||
|---|---|---|---|---|---|---|---|---|
| 400 | Polyester/Elastomer | Back (1), Hips (2) | XL (36" to 52") | 5'4"-6'8" | 190-300 | ANSI Z359.1 | 0000000 | 0000000 |
Front-Buckle Harness with Slide Thigh Buckle | ||||||||
| 400 | Polyester/Elastomer | Back (1), Hips (2) | XL (36" to 52") | 5'4"-6'8" | 190-300 | ANSI Z359.1 | 0000000 | 000000 |
Zip-Up Harness with Slide Thigh Buckle | ||||||||
| 310 | Polyester | Back (1), Hips (2) | M (34" to 37") | 5’-6’3” | 140-250 | ANSI Z359.1 | 0000000 | 000000 |
| 310 | Polyester | Back (1), Hips (2) | L (38" to 41") | 5’-6’3” | 140-250 | ANSI Z359.1 | 0000000 | 000000 |
| 310 | Polyester | Back (1), Hips (2) | XL (42" to 49") | 5’2”-6’6” | 180-310 | ANSI Z359.1 | 0000000 | 000000 |
Fall-Arrest Harnesses for Ladder Climbing and Positioning
These versatile harnesses have one D-ring on the chest for use with ladder-climbing systems as well as one D-ring on each hip to provide a stable working position. Attach harness to a ladder-climbing system using a carabiner. Harnesses have a D-ring on the back that attaches to a lanyard for fall protection. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Size | For Height | For Weight, lbs. | Waist Size | Specifications Met | Each | |
Pullover Harness with Traditional Thigh Buckle | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 400 | Polyester | Back (1), Chest (1), Hips (2) | One Size Fits All | __ | __ | 32" to 48" | ANSI Z359.1 | 0000000 | 0000000 |
Front-Buckle Harness with Traditional Thigh Buckle | |||||||||
| 400 | Polyester | Back (1), Chest (1), Hips (2) | M/L | 5'4"-6'5" | 150-225 | 32" to 48" | ANSI Z359.1 | 00000000 | 000000 |
Fall-Arrest Harnesses for Extracting
With D-rings on the shoulders, these harnesses allow you to raise and lower workers. They have a D-ring on the back that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Size | For Height | For Weight, lbs. | Waist Size | Specifications Met | Each | |
Front-Buckle Harness with Slide Thigh Buckle | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 310 | Polyester | Back (1), Shoulders (2) | M/L | 5'4"-6'5" | 150-225 | 32" to 48" | ANSI Z359.11 | 0000000 | 0000000 |
D-Ring Extension Straps
Hook these straps to your harness to add length to the existing D-ring and make it easier to attach a fall-arrest lanyard.
| Lg. | Capacity, lbs. | Connection Type | Each | |
| 18" | 310 | D-Ring × Snap Hook | 000000 | 000000 |
Harness Webbing Rings
Attach these rings to any harness to keep excess lanyard webbing out of the way.
| Ring ID | Lg. | Wd. | Thick. | Construction | Each | |
| 3/4" | 8" | 1" | 1/16" | Webbing | 000000 | 00000 |
Leg Support Straps
Prevent suspension trauma when hanging motionless. Strap attaches to a harness and has a foot loop so workers can flex legs while suspended.
| Capacity, lbs. | Each | |
| 400 | 000000 | 000000 |
Shock-Absorbing Fall-Arrest Lanyards
 |  Single Leg |  Dual Leg |
 |
For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Polyester/elastomer lanyards expand and contract with your movements.
Dual-leg lanyards attach to two anchors at once.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Specifications Met | Each | |
Single Leg | ||||||||||||
| 6 | 9 1/2 | 310 | Nylon | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 000000 |
| 6 | 9 1/2 | 420 | Polyester | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | __ | 000000 | 00000 |
| 6 | 10 | 310 | Polyester/Elastomer | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 000000 |
| 4 to 6 ft. | 10 1/2 | 310 | Nylon | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 00000 |
Dual Leg | ||||||||||||
| 6 | 9 1/2 | 310 | Nylon | Webbing | Snap Hook | Steel | Snap Hook/Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 000000 |
Electrical Arc Flash-Resistant
Shock-Absorbing Fall-Arrest Lanyards
| Single Leg | Dual Leg |
|
Made of Kevlar, these lanyards meet ASTM F887 when used with an arc flash-resistant harness. For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Dual-leg lanyard attaches to two anchors at once.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Specifications Met | Each | |
Single Leg | ||||||||||||
| 6 | 10 | 310 | Kevlar | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1, ASTM F887 | 000000 | 0000000 |
Dual Leg | ||||||||||||
| 6 | 10 | 310 | Kevlar | Webbing | Snap Hook | Steel | Snap Hook/Snap Hook | Steel | 3/4" | ANSI Z359.1, ASTM F887 | 000000 | 000000 |
Heat-Resistant Shock-Absorbing Fall-Arrest Lanyards
|  Single Leg |  Dual Leg |
|
Made of steel, these durable lanyards hold up in abrasive and high-heat applications. For adequate fall clearance, you must have at least 20 ft. of clearance. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Dual-leg lanyard attaches to two anchors at once.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Specifications Met | Each | |
Single Leg | ||||||||||||
| 6 | 10 | 310 | Steel | Wire Rope | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.13 | 000000 | 0000000 |
Dual Leg | ||||||||||||
| 6 | 10 | 310 | Steel | Wire Rope | Snap Hook | Steel | Snap Hook/Snap Hook | Steel | 3/4" | ANSI Z359.13 | 000000 | 000000 |
Shock-Absorbing Fall-Arrest Lanyards with Anchor Point
For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Polyester/elastomer lanyards expand and contract with your movements.
Hook-over lanyards have a large snap hook that attaches directly to a rated structure such as a scaffold or pipe to create an anchor point.
Wraparound lanyards loop around a rated structure such as an I-beam and then attach to themselves to create an anchor point.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Specifications Met | Each | |
Hook Over Single Leg | ||||||||||||
| 6 | 9 1/2 | 310 | Polyester | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4", 2 1/2" | ANSI Z359.1 | 0000000 | 0000000 |
| 6 | 10 | 310 | Polyester/Elastomer | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4", 2 1/2" | ANSI Z359.1 | 0000000 | 000000 |
Wraparound Single Leg | ||||||||||||
| 6 | 9 1/2 | 310 | Polyester | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 000000 |
Electrical Arc Flash-Resistant Shock-Absorbing
Fall-Arrest Lanyards with Anchor Point
Made of Kevlar, these lanyards meet ASTM F887 when used with an arc flash-resistant harness. Wrap the lanyard around a rated structure such as an I-beam and then attach it to itself to create an anchor point. For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness for a complete fall-arrest system.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Specifications Met | Each | |
Wraparound Single Leg | ||||||||||||
| 6 | 10 | 310 | Kevlar | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1, ASTM F887 | 000000 | 0000000 |
Heat-Resistant Shock-Absorbing
Fall-Arrest Lanyards with Anchor Point
Made of steel, these durable lanyards hold up in abrasive and high-heat applications. Attach the large snap hook directly to a rated structure such as a scaffold or pipe to create an anchor point. For adequate fall clearance, you must have at least 20 ft. of clearance. Use in conjunction with a harness for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Specifications Met | Each | |
Hook-Over Single Leg | ||||||||||||
| 6 | 10 | 310 | Steel | Wire Rope | Snap Hook | Steel | Snap Hook | Steel | 3/4", 2 1/2" | ANSI Z359.13 | 000000 | 0000000 |
Climbing Kits
Often used for climbing electrical substations and utility towers, these kits function as a fall-arrest system during initial ascent and descent. One carabiner connects the 16-ft. anchor span rope to the climbing hook, and the other carabiner connects the rope grab to your harness. Hand tighten the included wing nut on the fiberglass pole (sold separately) to easily attach it to the climbing hook. Then, use the pole to place the hook, which is specially shaped to fit over angle iron, securely above you. The hook serves as an anchor point while climbing.
Hook | Rope | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Lg. | Opening Wd. | Material | Connection Type | Cap., lbs. | Lg., ft. | Material | Includes | Specifications Met | Each | |
| 12" | 19" | 7" | Steel | Universal | 350 | 16 | Nylon Fabric | Climbing Hook, Anchor Span Rope, Rope Grab, Two Steel Carabiners, Carrying Case | OSHA Standards | 0000000 | 000000000 |