For Fan Width For Fan Width |
|---|
For Fan Height For Fan Height |
|---|
Frame Material Frame Material |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
For Fan Diameter For Fan Diameter |
|---|
Screen Material Screen Material |
|---|
|
Frame Finish Frame Finish |
|---|
|
Interference Reduction @ Frequency Interference Reduction@ Frequency |
|---|
|
Overall Width Overall Width |
|---|
|
|
|
Equipment-Cooling Fan Guards with Filters
Filters remove dust and other particles from the air.
Replacement filters are sold separately.
For technical drawings and 3-D models, click on a part number.
Fan Guards | Replacement Filters | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Fan Ht. | For Fan Wd. | Filter Pores per Inch | Frame Material | Filter Material | Temp. Range, °F | Each | Pkg. Qty. | Pkg. | ||
| 4.69", 4.72" (119 mm, 120 mm) | 4.69", 4.72" (119 mm, 120 mm) | 45 | Plastic | Foam | 15° to 165° | 00000000 | 00000 | 5 | 00000000 | 00000 |
| 1.57" (40 mm) | 1.57" (40 mm) | 30 | Plastic | Foam | 15° to 165° | 0000000 | 0000 | 5 | 0000000 | 0000 |
| 2.36" (60 mm) | 2.36" (60 mm) | 30 | Plastic | Foam | 15° to 165° | 0000000 | 0000 | 5 | 0000000 | 0000 |
| 3.15" (80 mm) | 3.15" (80 mm) | 30 | Plastic | Foam | 15° to 165° | 0000000 | 0000 | 5 | 0000000 | 0000 |
| 3.62" (92 mm) | 3.62" (92 mm) | 45 | Plastic | Foam | 15° to 165° | 00000000 | 0000 | 5 | 00000000 | 0000 |
Shielded Equipment-Cooling Fan Guards
Made of conductive metal, these guards cover fans to block EMI (electromagnetic interference) and RFI (radio frequency interference). The screen also helps keep large debris out of your enclosure and protects fingers from spinning fans.
Mesh fan guards work for general purpose shielding.
Honeycomb fan guards shield sensitive parts, such as precision measuring equipment. They have high interference reduction at frequency, also known as attenuation, so they block most interference. The beryllium copper gasket seals gaps between the fan guard and your enclosure for additional protection. Do not use in direct contact with acetylene.
For technical drawings and 3-D models, click on a part number.
For Fan | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Height | Width | Diameter | Thickness | Interference Reduction @ Frequency | Screen Material | Gasket Material | Temp. Range, °F | Each | |
Aluminum | |||||||||
Mesh | |||||||||
For Square Fans | |||||||||
| 2.36" (60 mm) | 2.36" (60 mm) | __ | 0.17" (4.3 mm) | Not Rated | Stainless Steel | __ | __ | 00000000 | 00000 |
| 3.15" (80 mm) | 3.15" (80 mm) | __ | 0.17" (4.3 mm) | Not Rated | Stainless Steel | __ | __ | 00000000 | 0000 |
| 3.62" (92 mm) | 3.62" (92 mm) | __ | 0.17" (4.3 mm) | Not Rated | Stainless Steel | __ | __ | 00000000 | 0000 |
| 4.69", 4.72" (119 mm, 120 mm) | 4.69", 4.72" (119 mm, 120 mm) | __ | 0.17" (4.3 mm) | Not Rated | Stainless Steel | __ | __ | 00000000 | 0000 |
| 5", 5.31" (127 mm, 135 mm) | 5", 5.31" (127 mm, 135 mm) | __ | 0.17" (4.3 mm) | Not Rated | Stainless Steel | __ | __ | 00000000 | 0000 |
For Round and Oblong Fans | |||||||||
| 5.91" (150 mm) | 6.77" (172 mm) | 5.91", 6.77" (150 mm, 172 mm) | 0.17" (4.3 mm) | Not Rated | Stainless Steel | __ | __ | 00000000 | 00000 |
Honeycomb | |||||||||
For Square Fans | |||||||||
| 1.5" (38 mm) | 1.5" (38 mm) | __ | 0.35" (8.8 mm) | 80 dB @ 1 GHz | Aluminum | Beryllium Copper | -55° to 150° | 0000000 | 00000 |
| 1.57" (40 mm) | 1.57" (40 mm) | __ | 0.35" (8.8 mm) | 80 dB @ 1 GHz | Aluminum | Beryllium Copper | -55° to 150° | 0000000 | 00000 |
| 2.36" (60 mm) | 2.36" (60 mm) | __ | 0.35" (8.8 mm) | 80 dB @ 1 GHz | Aluminum | Beryllium Copper | -55° to 150° | 0000000 | 00000 |
| 3.15" (80 mm) | 3.15" (80 mm) | __ | 0.35" (8.8 mm) | 80 dB @ 1 GHz | Aluminum | Beryllium Copper | -55° to 150° | 0000000 | 00000 |
| 3.62" (92 mm) | 3.62" (92 mm) | __ | 0.35" (8.8 mm) | 80 dB @ 1 GHz | Aluminum | Beryllium Copper | -55° to 150° | 0000000 | 00000 |
| 4.72" (120 mm) | 4.72" (120 mm) | __ | 0.35" (8.8 mm) | 80 dB @ 1 GHz | Aluminum | Beryllium Copper | -55° to 150° | 0000000 | 00000 |
Black-Oxide Aluminum | |||||||||
Mesh | |||||||||
For Square Fans | |||||||||
| 2.36" (60 mm) | 2.36" (60 mm) | __ | 0.17" (4.3 mm) | Not Rated | Stainless Steel | __ | __ | 000000000 | 0000 |
| 3.15" (80 mm) | 3.15" (80 mm) | __ | 0.17" (4.3 mm) | Not Rated | Stainless Steel | __ | __ | 000000000 | 0000 |
| 3.62" (92 mm) | 3.62" (92 mm) | __ | 0.17" (4.3 mm) | Not Rated | Stainless Steel | __ | __ | 000000000 | 0000 |
| 4.69", 4.72" (119 mm, 120 mm) | 4.69", 4.72" (119 mm, 120 mm) | __ | 0.17" (4.3 mm) | Not Rated | Stainless Steel | __ | __ | 000000000 | 0000 |
For Round and Oblong Fans | |||||||||
| 5.91" (150 mm) | 6.77" (172 mm) | 5.91", 6.77" (150 mm, 172 mm) | 0.17" (4.3 mm) | Not Rated | Stainless Steel | __ | __ | 000000000 | 00000 |
Equipment-Cooling Fan Guards
For Square, Round,
And Oblong Fans
For technical drawings and 3-D models, click on a part number.
| For Fan Ht. | For Fan Wd. | Each | |
Nickel-Plated Steel | |||
|---|---|---|---|
| 4.69", 4.72" (119 mm, 120 mm) | 4.69", 4.72" (119 mm, 120 mm) | 00000000 | 00000 |
| 5", 5.31" (127 mm, 135 mm) | 5", 5.31" (127 mm, 135 mm) | 00000000 | 0000 |
| 0.98" (25 mm) | 0.98" (25 mm) | 00000000 | 0000 |
| 1.57" (40 mm) | 1.57" (40 mm) | 00000000 | 0000 |
| 1.97" (50 mm) | 1.97" (50 mm) | 00000000 | 0000 |
| 2.36" (60 mm) | 2.36" (60 mm) | 00000000 | 0000 |
| 3.15" (80 mm) | 3.15" (80 mm) | 00000000 | 0000 |
| 3.62" (92 mm) | 3.62" (92 mm) | 00000000 | 0000 |
| 6.89" (175 mm) | 6.89" (175 mm) | 00000000 | 0000 |
| 11.02" (280 mm) | 11.02" (280 mm) | 00000000 | 00000 |
Powder-Coated Steel | |||
| 8.86" (225 mm) | 8.86" (225 mm) | 00000000 | 00000 |
304 Stainless Steel | |||
| 4.69", 4.72" (119 mm, 120 mm) | 4.69", 4.72" (119 mm, 120 mm) | 000000000 | 0000 |
| 5", 5.31" (127 mm, 135 mm) | 5", 5.31" (127 mm, 135 mm) | 000000000 | 0000 |
| 0.98" (25 mm) | 0.98" (25 mm) | 000000000 | 0000 |
| 1.57" (40 mm) | 1.57" (40 mm) | 000000000 | 0000 |
| 1.97" (50 mm) | 1.97" (50 mm) | 000000000 | 0000 |
| 2.36" (60 mm) | 2.36" (60 mm) | 000000000 | 0000 |
| 3.15" (80 mm) | 3.15" (80 mm) | 000000000 | 0000 |
| 3.62" (92 mm) | 3.62" (92 mm) | 000000000 | 0000 |
Plastic | |||
| 4.69", 4.72" (119 mm, 120 mm) | 4.69", 4.72" (119 mm, 120 mm) | 00000000 | 0000 |
| 1.57" (40 mm) | 1.57" (40 mm) | 00000000 | 000 |
| 2.36" (60 mm) | 2.36" (60 mm) | 00000000 | 0000 |
| 3.15" (80 mm) | 3.15" (80 mm) | 00000000 | 0000 |
| 3.62" (92 mm) | 3.62" (92 mm) | 00000000 | 0000 |
Fan Shroud Air Filters
These filters fit over fans with round guards to trap dust and debris, keeping contaminants out of the air and off of your fan. An elastic band holds them securely in place.
Front-mount filters fit over the entire front of fans, blocking dust that has entered the fan from blowing back out into the air. Back-mount filters have a center hole, and secure around a fan’s motor housing with a hook and loop closure. They filter air as it enters the fan, protecting the blades and bearings from wear and damage while also reducing the amount of dust the fan will blow out.
Polyester filters are disposable—replace them when they’re dirty. Polypropylene filters have an electrostatic charge that attracts particles, and can be washed and reused.
Dirt and dust stands out on white filters, so it’s easy to see when they need to be cleaned or replaced.
| For Fan Diameter | Filter Pores per Inch | Color | Pkg. Qty. | Each | |
For Fan Front | |||||
|---|---|---|---|---|---|
Polypropylene Plastic | |||||
| 20" | Not Rated | White | __ | 00000000 | 000000 |
| 24" | Not Rated | White | __ | 00000000 | 00000 |
| 26" | Not Rated | White | __ | 00000000 | 00000 |
| 30" | Not Rated | White | __ | 00000000 | 00000 |
| Pkg. | |||||
For Fan Back | |||||
Polyester Plastic | |||||
| 18" | Not Rated | White | 12 | 00000000 | 000000 |
| 24" | Not Rated | White | 12 | 00000000 | 000000 |
| 26" | Not Rated | White | 12 | 00000000 | 000000 |
| 30" | Not Rated | White | 12 | 00000000 | 000000 |
| 32" | Not Rated | White | 12 | 00000000 | 000000 |
| 36" | Not Rated | White | 12 | 00000000 | 000000 |
| Each | |||||
Polypropylene Plastic | |||||
| 17" | Not Rated | White | __ | 00000000 | 00000 |
| 24" | Not Rated | White | __ | 00000000 | 00000 |
| 30" | Not Rated | White | __ | 00000000 | 000000 |
| 34" | Not Rated | White | __ | 00000000 | 000000 |
| 38" | Not Rated | White | __ | 00000000 | 000000 |
Fan Guards
These two-piece guards attach to NEMA frame motors.
For technical drawings and 3-D models, click on a part number.
| For Blade Dia. | Guard Dia. | For Motor Frame Size | Guard Material | Each | |
| 18", 20" | 23" | NEMA 42Y | Chrome-Plated Steel | 000000 | 0000000 |
| 24" | 27" | NEMA 48, NEMA 48Y, NEMA 48YZ, NEMA 56, NEMA 56Y, NEMA 56YZ | Chrome-Plated Steel | 000000 | 000000 |
| 30" | 33 1/2" | NEMA 48, NEMA 48Y, NEMA 48YZ, NEMA 56, NEMA 56Y, NEMA 56YZ | Chrome-Plated Steel | 000000 | 000000 |
Supply-Side Guards for Wall-Mount Exhaust Fans
Protect your wall-mount exhaust fans from debris.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||
|---|---|---|---|---|---|---|---|
| For Blade Dia. | Ht. | Wd. | Dp. | Material | Mounting Fasteners Included | Each | |
| 12" | 16 1/4" | 16 1/4" | 16" | Galvanized Steel | Yes | 00000000 | 0000000 |
| 14", 16" | 22 1/4" | 22 1/4" | 16" | Galvanized Steel | Yes | 00000000 | 000000 |
| 18" | 24 1/4" | 24 1/4" | 16" | Galvanized Steel | Yes | 00000000 | 000000 |
| 20", 24" | 30 1/2" | 30 1/2" | 25" | Galvanized Steel | Yes | 00000000 | 000000 |
| 30" | 36 1/2" | 36 1/2" | 25" | Galvanized Steel | Yes | 00000000 | 000000 |
| 36" | 42 1/2" | 42 1/2" | 28" | Galvanized Steel | Yes | 00000000 | 000000 |
| 42" | 48 1/2" | 48 1/2" | 34 1/2" | Galvanized Steel | Yes | 00000000 | 000000 |
| 48" | 54 1/2" | 54 1/2" | 36 1/2" | Galvanized Steel | Yes | 00000000 | 000000 |
Exhaust-Side Guards for Wall-Mount Exhaust Fans
Protect your wall-mount exhaust fans from debris.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||
|---|---|---|---|---|---|---|---|
| For Blade Dia. | Ht. | Wd. | Dp. | Material | Mounting Fasteners Included | Each | |
| 12" | 13 3/4" | 13 3/4" | 6" | Galvanized Steel | Yes | 00000000 | 0000000 |
| 14", 16" | 19 3/4" | 19 3/4" | 6" | Galvanized Steel | Yes | 00000000 | 000000 |
| 18" | 21 3/4" | 21 3/4" | 6" | Galvanized Steel | Yes | 00000000 | 000000 |
| 20", 24" | 27 3/4" | 27 3/4" | 6" | Galvanized Steel | Yes | 00000000 | 000000 |
| 30" | 33 3/4" | 33 3/4" | 6" | Galvanized Steel | Yes | 00000000 | 000000 |
| 36" | 39 3/4" | 39 3/4" | 6" | Galvanized Steel | Yes | 00000000 | 000000 |
| 42" | 45 3/4" | 45 3/4" | 6" | Galvanized Steel | Yes | 00000000 | 000000 |
| 48" | 51 3/4" | 51 3/4" | 6" | Galvanized Steel | Yes | 00000000 | 000000 |