Control two devices and delay the shut off of one device by up to one hour. These switches are often used with lights and fans for ventilation. All have an override that bypasses the automatic shut-off.

Control equipment with high currents such as air conditioners, heaters, and ventilating equipment. They automatically turn electrical equipment on or off after a set interval of time.

Switches with override can bypass the automatic shut-off.

Use these toggle switches to control lighting. They also work with AC motor loads up to 80% of the current rating. All fit standard wall plates (not included).

Wall switch lockouts (sold separately) mount over switches to secure them in the on or off position.

For technical drawings and 3-D models, click on a part number.

Often used in large, open workspaces, these switches can be wired on opposite ends of the room to control lights on the same circuit. These switches fit standard wall plates (not included).

Three-way switches work in pairs to control lights from two different locations.

Use a four-way switch with two three-way switches to control lights from three different locations.

Wall switch lockouts (sold separately) mount over switches to secure them in the on or off position.

For technical drawings and 3-D models, click on a part number.

Control lights by transmitting a wireless signal from these switches to a control relay (sold separately) on your fixture. Switches can be surface mounted with a wall plate or used as a hand-held remote. No batteries or secondary power source are needed.

Use these rocker switches to control lighting. They also work with AC motor loads up to 80% of the current rating. All fit standard wall plates (not included).

Wall switch lockouts (sold separately) mount over switches to secure them in the on or off position.

For technical drawings and 3-D models, click on a part number.

Also known as three-way switches, these are often used in large, open workspaces and can be wired on opposite ends of the room to control lights on the same circuit. They work in pairs to control lights from two different locations. All fit standard wall plates (not included).

Wall switch lockouts (sold separately) mount over switches to secure them in the on or off position.

For technical drawings and 3-D models, click on a part number.

Secure sensitive lighting equipment; these switches have a round key that is difficult to duplicate. The key is required to turn lights on and off. They’re keyed alike, so all switches actuate with the same key. They also work with AC motor loads up to 80% of the current rating.

Also known as three-way switches, these are often used in large, open workspaces and can be wired on opposite ends of the room to control lights on the same circuit. They work in pairs to control lights from two different locations. To prevent accidental activation, they require a key to turn lights on and off. They’re keyed alike, so all switches actuate with the same key. They also work with AC motor loads up to 80% of the current rating. All fit standard wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Prevent accidental activation—these switches require a key to turn lights on and off. They’re keyed alike, so all switches actuate with the same key. They also work with AC motor loads up to 80% of the current rating. All fit standard wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Convert one or more single-speed ceiling fans to variable speed. Connect them to the control in a single-gang switch box.

For technical drawings and 3-D models, click on a part number.