Overall Height Overall Height | Show |
|---|
|
Overall Height Overall Height | Hide |
|---|
Mounting Location Mounting Location |
|---|
|
Power Source Power Source |
|---|
|
Fan Head Movement Fan Head Movement |
|---|
|
Airflow Airflow |
|---|
|
Motor Enclosure Type Motor Enclosure Type |
|---|
|
Mount Type Mount Type |
|---|
|
Power Power |
|---|
|
Guard Material Guard Material |
|---|
|
Specifications Met Specifications Met |
|---|
|
About Exhaust Fans
More
About Sound Levels
Measured in decibels (dB), volume ratings indicate how much noise equipment makes. Some common volume levels include a whisper @ 20 dB, a refrigerator @ 40 dB, a conversation @ 60 dB, and a light machine shop @ 90 dB. OSHA recommends hearing protection for exposure to 80 dB and greater.
Economy Direct-Drive Mobile Floor Fans
Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.
Fans with a totally enclosed motor enclosure can be used in dirty, dusty, and damp environments.
Add an optional misting kit to 30", 36", and 42" blade diameter fans to make them produce a fine mist when connected to a garden hose. There are five misting nozzles, each with an inline filter to prevent clogging. These kits are not recommended for indoor use.
Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Dia. | Airflow, cfm | Volume | Motor Speed, rpm | No. of Speeds | Power, hp | Current, A | Ht. | Wd. | Dp. | Cord Lg., ft. | Housing Material | Blade Material | Guard Material | Specifications Met | Each | |
Totally Enclosed Motor Enclosure | ||||||||||||||||
120V AC, Single Phase—Three Prong Plug | ||||||||||||||||
| 36" | 10,900 | 72 dBA @ 15 ft. | 825 | 1 | 1/2 | 6.0 | 40" | 39" | 21" | 10 | Steel | Steel | Steel | C-UL Listed, UL Listed | 00000000 | 0000000 |
| For Blade Dia. | Each | |
| 36" | 00000000 | 0000000 |
Economy Direct-Drive Mobile Floor Fans with Tilt Stand
Tilt fans to direct air where it's needed. These direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. All have a totally enclosed motor enclosure, which can be used in dirty, dusty, and damp environments.
30" and 36" blade diameter fans can also mount to the wall and ceiling.
Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Dia. | Airflow, cfm | Volume | Motor Speed, rpm | No. of Speeds | Power, hp | Current, A | Ht. | Wd. | Dp. | Cord Lg., ft. | Housing Material | Blade Material | Guard Material | Specifications Met | Each | |
Totally Enclosed Motor Enclosure | ||||||||||||||||
120V AC, Single Phase—Three Prong Plug | ||||||||||||||||
| 36" | 11,200 | 78 dB @ 15 ft. | 830 | 2 | 1/2 | 4.6 | 40" | 39" | 15" | 10 | Steel | Steel | Steel | UL Listed | 00000000 | 0000000 |
Jet-Stream Floor Fans
Often used to cool warehouse aisles and production lines, these fans generate a stream of air that travels farther than air from conventional fans. All have a direct-drive motor, which has fewer moving parts than belt-drive motors for less maintenance. They also have a totally enclosed motor enclosure, which can be used in dirty, dusty, and damp environments.
Overall | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Dia. | Airflow, cfm | Volume | Motor Speed, rpm | No. of Speeds | Power, hp | Current, A | Ht. | Wd. | Dp. | Fan Head Movement | Housing Material | Blade Material | Guard Material | Each | |
230/460V AC, Three Phase—Hardwire | |||||||||||||||
| 36" | 20,000 | 86 dB @ 15 ft. | 1,750 | 1 | 3 | 8.2/4.1 | 40" | 36" | 24" | Non-Oscillating | Steel | Aluminum | Steel | 0000000 | 000000000 |
Belt-Drive Upblast Roof-Mount Exhaust Fans
Belt-drive fans are quieter and have a longer life span than direct-drive fans because components can be replaced if worn or damaged. These exhaust fans draw stagnant and humid air out through your roof and then expel it up and away from the roof surface. All fans have a disconnect switch to turn off the power for servicing. Fans are AMCA (Air Movement and Control Association) rated.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
Fans | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting Bases | |||||||||||||
| Blade Dia. | Airflow @ Static Pressure | Volume | Motor Speed, rpm | Power, hp | Dia. | Ht. | Base Wd. | Max. Temp., °F | Housing Material | Specifications Met | Each | Each | ||
Open Dripproof Motor Enclosure | ||||||||||||||
208-230/460V AC, Three Phase—Hardwire | ||||||||||||||
| 30" | 8,250 cfm @ 1/2 in. of H₂O 9,500 cfm @ 0 in. of H₂O | 49 dB @ 15 ft. | 1,725 | 3 | 52 3/4" | 40" | 40" | 300° | Aluminum | AMCA Rated, ETL Listed | 0000000 | 000000000 | 0000000 | 0000000 |
High-Volume Low-Heat Air Blowers
Combine high-volume airflow with low-heat output for warming and drying. These blowers tilt to direct airflow.
Noise-reducing blowers are quieter than all of the other blowers.
UL-certified blowers have passed strict U.S. safety standards.
Use the optional wye adapters to direct air into two hoses for more complete drying.
O'all | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Temp. Setting, °F | Airflow, cfm | Tip Dia. | Nozzle Lg. | Lg. | Wd. | Ht. | Ht. Adjustability | Wattage, W | Heating Element Material | Housing Material | Plug Type | NEMA Style | Features | Specifications Met | Each | ||
120V AC | |||||||||||||||||
Adjustable Airflow | |||||||||||||||||
| C | 100°, 125° | 106-175 | 2 1/4" | 16" | 30" | 9" | 40" | Fixed | 1,800 | Mica | Aluminum | Three Prong | 5-15 | Noise Reducing | __ | 0000000 | 0000000 |
| C | 100°, 120° | 106-230 | 2 1/4" | 16" | 30" | 9" | 40" | Fixed | 1,800 | Mica | Aluminum | Three Prong | 5-15 | __ | UL Certified | 0000000 | 000000 |