We will reply to your message within an hour.
Create a sheet of high-velocity air.
Producing the same airflow as standard air knives, these are quieter and use 18% less compressed air.
Also known as air wipes, these use a 360° airstream to blow off, dry, clean, and cool tubes, cables, extruded shapes, and hoses.
An ionizing bar temporarily neutralizes static to protect against ESD (electrostatic discharge).
These produce the same airflow as standard static-eliminating air knives but are quieter and use 15% less compressed air.
These blowguns have a metal body.
Compact enough to carry with you, these guns have a built-in quick-disconnect hose coupling for easy connection to an air line.
Designed to reduce noise, these blowguns are quieter than similar standard guns.
Also known as air-shield and safety-shield blowguns, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.
Two inlets allow connection to air lines above or below. Use the top inlet when the blowgun is suspended from an overhead hose and the bottom inlet for bench and floor hoses.
Operate a blowgun without disconnecting your air tool—these guns fit between the tool and air hose. Good for blowing away debris after using an air-powered sander or grinder.
Connect the included hose to your air supply and these blowguns are ready to use.
The extra length lets you access hard-to-reach areas.
The included hose is ready to connect to your air supply.
Also known as air-shield and safety-shield blowguns, an outer air curtain deflects flying chips and dust while the center airstream blows away debris.
These guns include a rubber tip that won't damage your workpiece.
Increase your reach with the telescoping nozzle.
Maximize comfort and minimize strain with these lightweight guns.
These blowguns provide more than two times the airflow of standard guns.
The flat nozzle distributes air over a wide area.
The most powerful blowguns we sell, these use compressed air to clean and blow debris.
Blow air backward from the nozzle to clean out the inside of pipes, tubes, and channels without pushing debris into your system.
Safely blow dust and debris off your clothes. These blowers are a safer alternative to compressed air and help you meet OSHA regulations.
Blow off dust and contamination, eliminate static charges, and guard against ESD (electrostatic discharge).
These guns provide more than three times the airflow of standard static-eliminating blowguns.
Bend the stand's flexible arm to position your gun and keep it in place. Use the included foot pedal to activate airflow and static elimination.
A nonconductive plastic nozzle and tip protect against accidental contact with live electrical circuits. These blowguns are tested to 1,000 volts to meet IEC 60900.
Clean surfaces without transferring dust or moisture from the air hose. These blowguns have a replaceable filter that traps particles such as rust and smoke and absorbs moisture.