We will reply to your message within an hour.
Also known as muffin fans, these keep heat-sensitive equipment such as electronic components cool.
These fans produce greater airflow than standard equipment-cooling fans.
Able to withstand submersion in up to 3 meters of water, these fans cool electronics in food processing areas and outdoors.
Kits include a fan, guard, and power cord. They keep heat-sensitive equipment such as electronic components cool.
With the addition of a thermostat, the fans in these kits switch on only when needed.
Cool electronics and other sensitive equipment in potentially unsafe areas.
To keep unenclosed electronic components cool, place trays on top of equipment to direct a stream of air below.
For use in tight spaces where other equipment-cooling blowers won't fit, air enters through the center of the unit and then expels along the edges.
Create a more concentrated stream of air than equipment-cooling fans to blow away the heat generated by electronic equipment, induction heaters, and high-wattage bulbs.
Also known as crossflow blowers, these create a wider stream of air than other equipment-cooling blowers.
Position these wall-mount fans to direct air where it’s needed.
These fans meet U.S. Navy specification MIL-DTL-68.
Position these fans near meeting areas to circulate air without drowning out voices.
With a ball-bearing motor and cupped fan blades, these fans last longer and focus airflow better than economy fans.
Generate at least 25% greater airflow than economy and premium fans.
A bright yellow guard makes these fans easy to spot.
Often used on loading docks, these fans have a pivoting extension arm and tilting fan head so you can direct air where it's needed as well as move it out of the way when it's not.
Place these pedestal fans to circulate air where it’s needed.
Run these fans continuously in environments that reach up to 150° F.
Wheel these mobile fans wherever you need them. Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.
Tilt fans to direct air where it's needed.
With an aluminum housing, these fans stand up to corrosion better than economy fans.
Attach these fans to beams to direct air where it’s needed.
Hanging from the ceiling, these fans direct air where it's needed.
Great for meeting areas, these fans circulate air without drowning out voices. Their low profile maximizes headroom in areas with low clearance.
Continuously mix and circulate air to balance room temperature in spaces where there is a large difference in temperature between the floor and ceiling.
With a polyethylene housing, these fans are durable and resist rust. They’re direct-drive fans, so they have fewer moving parts than belt-drive fans for less maintenance.
For rust resistance and durability, these fans have a polyethylene housing. They’re belt-drive fans, so they’re quieter and will last longer than direct-drive fans because their parts can be replaced if worn or damaged.
Direct air to a specific area, ranging from the floor to the ceiling, by adjusting the head of these fans up and down.
Whether freestanding or mounted to floors, walls, or workstations, these versatile fans cover larger areas than bench-top fans.
Mount these fans directly to a rack.
Often used to cool warehouse aisles and production lines, these wall-mount fans generate a stream of air that travels farther than air from conventional fans.
Often used to cool warehouse aisles and production lines, these fans generate a stream of air that travels farther than air from conventional fans.
Connect these fans to a garden hose to produce a fine cooling mist.
Connect these fans to a hose to produce a fine mist.
Tilt the head of these fans to direct air where it's needed.
Wheels make it easy to move these fans.
Generate at least 25% greater airflow than standard office pedestal fans.
Position these fans to keep office personnel cool.
Because they have a small footprint, these fans are good for small areas or places where clutter is a concern.
Clip these fans onto your desk to keep cool.
The head on these fans tilts to direct air where it's needed.
You can mount these fans on beams and walls.
Keep cool with these personal-size wall-mount fans.
Draw fresh air in or push stale air out of your windows. Reverse airflow with the flip of a switch.
Position these fans in a window, set them on the floor, or attach them to an optional box fan stand.
Easily hang these fans from your ceiling using the attached bracket and a mounting chain kit. They're more powerful than our standard box fans.
Mount these fans on flat ceilings. All include a support cable or downrods to mount them into joists.
These fans have a motor that is UL listed for Class I, Group D; Class II, Groups E, F, and G hazardous environments.
The motor in these freestanding fans is UL listed for Class I, Group D; Class II, Groups E, F, and G hazardous environments.
UL listed for use in hazardous environments, these fans are often used to cool warehouse aisles and production lines. They generate a stream of air that travels farther than air from conventional fans.
Made of corrosion-resistant material, these fans meet UL 507 spray test requirements for washdowns.
Made of corrosion-resistant material, these freestanding fans meet UL 507 spray test requirements for washdowns.
Build your own fan or replace a fan motor.
Since they have fewer moving parts, you can use these direct-drive motors to build fans that require less maintenance than fans with belt-drive motors.
Better suited for dirty, dusty, and damp environments than standard direct-drive fans, these have a totally enclosed motor enclosure.
Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Use these fans to draw stagnant and humid air out of a room or area.
Use these fans to draw stagnant and humid air out of a room or area. Belt-drive fans are quieter and have a longer life span than direct-drive fans because components can be replaced if worn or damaged.
These light duty fans are designed for use without duct.
These fans come complete with a movable-blade louver. The louvers are gravity operated so they open only when air flows through them, which prevents backdrafts.
Rust won't be a problem with the durable plastic housing and louvers on these fans.
Belt-drive fans are quieter and have a longer life span than direct-drive fans because components can be replaced if worn or damaged.
Good when you don't have room to mount an exhaust fan inside your facility, these fans attach to openings in outside walls.
Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.
With a UL-listed motor, these fans can be used in hazardous environments with combustible gases and dust to draw stagnant and humid air out through your roof, forcing it up and away from its surface.
Exhaust air and humidity directly into the outdoors without using duct.
Also known as room-to-room exhaust fans, these exhaust air and humidity directly into another room.
Use these fans to draw stagnant and humid air out of a room.
These fans have a light that can operate alone or share a switch with the fan.
When a room is occupied, these fans detect the motion and turn on.
Keep noise to a minimum with 1/2" thick acoustical insulation and vibration-resistant motor mounts.
These fans have a motor that is UL listed for hazardous environments.
With fewer moving parts than belt-drive fans, these direct-drive exhaust fans require less maintenance.
Produce three times the airflow as standard direct-drive duct fans.
Insert these fans directly into your ductwork. They give small heaters and air conditioners a boost to circulate air through ductwork.
Install these blowers into ductwork where high static pressures are present.
Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard blowers can handle.
These blowers have an explosion-proof motor that is UL listed for hazardous locations. They also have an aluminum housing for spark resistance.
Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard hazardous location spark-resistant blowers can handle.
Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard spark-resistant blowers can handle.
These blowers have an aluminum housing for spark resistance.
A 304 stainless steel housing offers good corrosion resistance.
These blowers have a motor that is UL listed for Class I, Divisions 1 and 2, Group D; and Class II, Divisions 1 and 2, Groups F and G hazardous locations.
For resistance to chemicals as well as corrosion, these blowers have a plastic housing.
These blowers operate on 120V AC.
In addition to blowing twice as much air as other portable blowers, these have a motor that is UL listed for Class I, Divisions 1 and 2, Group D; and Class II, Divisions 1 and 2, Groups E, F, and G hazardous locations.
Blow twice as much air as other portable blowers.
A plastic housing offers good corrosion resistance.
Remove fumes, vapors, and fine dust particles from your space.
Mount these exhausters to the floor to remove fumes, vapors, and fine dust particles from your space.
In addition to using the handle to carry these exhausters, you can mount them to a wall, bench, or floor.
Position these exhausters above drums, tanks, and distillers.
This fume exhauster has a motor that is UL listed for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G locations. Use it to remove fumes, vapors, and fine dust particles from your space.
Increase airflow through exhaust duct to improve furnace performance.
Often used for electric-to-gas conversions and renovations, these exhausters allow gas- or oil-fired equipment to be vented through a sidewall rather than a chimney.
Protect equipment in enclosures and cabinets from heat.
Slide these trays in to cool your standard 19" wide enclosure.
Expandable fan trays come with three fans but can hold up to nine for greater airflow.
Able to withstand dust and water splashes, these fans are IP54 rated.
Create a more concentrated stream of air than enclosure-cooling fans to cool equipment faster.
The body rotates to direct air where it’s needed.
Dry large flat surfaces such as floors with a concentrated stream of air.
To quickly dry flat surfaces, these fans direct air downward.
Cool large machinery such as transformers.
Also known as regenerative blowers, use these to produce high-flow compressed air with low pressure or vacuum to operate pump drives, lift tables, and conveying systems.
Clear dust and debris, test air ducts for leaks, and dry large surfaces without needing a compressed air line.
Safely blow dust and debris off your clothes. These blowers are a safer alternative to compressed air and help you meet OSHA regulations.
Blow off dust and contamination, eliminate static charges, and guard against ESD (electrostatic discharge).
These guns provide more than three times the airflow of standard static-eliminating blowguns.
Bend the stand's flexible arm to position your gun and keep it in place. Use the included foot pedal to activate airflow and static elimination.
Combine high-volume airflow with low-heat output for warming and drying.
Blast your heating, drying, and shrinking projects with hot air to get the job done quickly. Choose from blowers with temperature settings from 300° to 750° F.
Draw particles and filament fumes away from open-frame 3D printers without cooling off printed parts.
Cool the air in your enclosure to protect electronic components from excessive heat. These heat exchangers absorb heat in the enclosure, then use cooler air outside the enclosure to draw the heat away, lowering the temperature inside.
Also known as Peltier coolers, these coolers use electrical current to transfer heat away from your enclosure while sealing out contaminants.
Everything you need to replace a fan motor on refrigeration units, appliances, and blowers.
Also known as swamp coolers, use these air coolers wherever air conditioning is impractical.
Produce twice as much cool air as standard mobile evaporative air coolers.
Spread the range of static control further than static eliminators without fan.
Small enough to fit on your desktop, these static eliminators create an ionized field across your immediate workspace.
Project a curtain-like stream of static-eliminating ionized air.
These blowers create an extra-wide field of ionized air.
Also known as ionizing bars.
Fans built in to these enclosures keep electronics at the temperature you set, and the filtered intake and exhaust let cool air flow through the enclosure without letting water and contaminants in.
Mount these cleaners to workbench tops to remove odors and fumes from the air.
Eliminate static buildup while cleaning air.
Mount these air cleaners to your bench top and adjust the arm to your desired position.
Filtering away dust and particles, these hoods create a clean space for demanding work, such as bioprocessing, pharmaceuticals, electronics, and optics.
Carry these small cleaners to job sites to remove odors and dust from the air.
Carry these cleaners to job sites to remove odors and fumes from the air. Use the hose to direct cleaning.
Larger than portable air cleaners, these air cleaners roll to where you need them.
Roll this air cleaner to the contaminant source or place it on a bench top.
Purify the air in spaces with light cleaning needs.
Save floor space—cleaners mount in a T-bar style ceiling.
Remove viruses, bacteria, dust, and other particles from the air.
Convert one or more single-speed ceiling fans to variable speed.