12V DC Fans | McMaster-Carr

Filter by

Shape

Voltage

Overall Height

Overall Width

Overall Depth

Airflow

Current

Frame Material

Mounting Hole Diameter

Volume (Sound)

Bearing Type

Blade Material

Maximum Temperature

Electrical Connection

Power Source

Minimum Temperature

RoHS Compliance

DFARS Compliance

Thermostat Included

Certification

UL File Number

Overall Diameter

REACH Compliance

Forward

How can we improve?

99 Products

About Exhaust Fans

About Air Conditioner Cooling Capacity

About Sound Levels

Measured in decibels (dB), volume ratings indicate how much noise equipment makes. Some common volume levels include a whisper @ 20 dB, a refrigerator @ 40 dB, a conversation @ 60 dB, and a light machine shop @ 90 dB. OSHA recommends hearing protection for exposure to 80 dB and greater.

DC Equipment-Cooling Fans

Running on 48V DC power or lower, these compact fans fit inside electronics and other small, heat-sensitive equipment to keep things cool. They're also known as muffin fans. Some meet American and Canadian safety standards.

Fans with ball bearings generate less heat as they run, so they have a longer life than fans with sleeve bearings.

Fans with sleeve bearings are good for less demanding applications, such as cooling prototypes or parts that aren’t used often.

Fans with quick-disconnect (QD) terminals are compatible with quick-disconnect power cords.

For technical drawings and 3-D models, click on a part number.

Square

Overall
Ht.	Wd.	Dp.	Airflow, cfm	Bearing Type	Temp. Range, °F	Volume, dBA	Current, A	Frame Material	Blade Material	Mounting Fasteners Included	Mounting Hole DIa.	Specifications Met		Each
12V DC—Wire Leads
0.98" (25 mm)	0.98" (25 mm)	0.39" (10 mm)	1	Ball	15° to 155°	50	0.06	Plastic	Plastic	No	0.11" (2.8 mm)	UL Recognized Component, C-UL Recognized Component	0000000	000000
1.57" (40 mm)	1.57" (40 mm)	0.39" (10 mm)	3	Ball	0° to 165°	16	0.05	Plastic	Plastic	No	0.14" (3.6 mm)	UL Recognized Component, CSA Certified	0000000	00000
1.57" (40 mm)	1.57" (40 mm)	0.39" (10 mm)	7	Ball	15° to 155°	28	0.13	Plastic	Plastic	No	0.15" (3.8 mm)	UL Recognized Component, C-UL Recognized Component	0000000	00000
1.57" (40 mm)	1.57" (40 mm)	0.79" (20 mm)	5	Ball	15° to 155°	23	0.09	Plastic	Plastic	No	0.15" (3.8 mm)	UL Recognized Component, C-UL Recognized Component	0000000	00000
1.57" (40 mm)	1.57" (40 mm)	0.79" (20 mm)	7	Ball	0° to 140°	29	0.13	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	0000000	00000
1.57" (40 mm)	1.57" (40 mm)	0.98" (25 mm)	11	Ball	0° to 155°	39	0.20	Plastic	Plastic	No	0.14" (3.5 mm)	UL Recognized Component, CSA Certified, C-UL Recognized Component	00000000	00000
1.57" (40 mm)	1.57" (40 mm)	0.98" (25 mm)	14	Ball	0° to 140°	46	0.27	Plastic	Plastic	No	0.14" (3.5 mm)	UL Recognized Component, CSA Certified, C-UL Recognized Component	00000000	00000
1.57" (40 mm)	1.57" (40 mm)	1.11" (28 mm)	22	Ball	0° to 155°	54	0.56	Plastic	Plastic	No	0.15" (3.7 mm)	UL Recognized Component, CSA Certified, C-UL Recognized Component	00000000	00000
1.97" (50 mm)	1.97" (50 mm)	0.59" (15 mm)	11	Ball	0° to 155°	30	0.08	Plastic	Plastic	No	0.15" (3.8 mm)	UL Recognized Component, CSA Certified	0000000	00000
2.36" (60 mm)	2.36" (60 mm)	0.98" (25 mm)	12	Ball	15° to 155°	22	0.09	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, C-UL Recognized Component	0000000	00000
2.36" (60 mm)	2.36" (60 mm)	0.98" (25 mm)	16	Sleeve	15° to 155°	17	0.05	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, C-UL Recognized Component	0000000	0000
2.36" (60 mm)	2.36" (60 mm)	0.98" (25 mm)	17	Ball	0° to 165°	29	0.08	Plastic	Plastic	No	0.15" (3.8 mm)	UL Recognized Component, CSA Certified	0000000	00000
2.36" (60 mm)	2.36" (60 mm)	0.98" (25 mm)	20	Ball	15° to 155°	30	0.13	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, C-UL Recognized Component	0000000	00000
2.36" (60 mm)	2.36" (60 mm)	0.98" (25 mm)	23	Ball	0° to 155°	35	0.16	Plastic	Plastic	No	0.15" (3.8 mm)	UL Recognized Component, CSA Certified	0000000	00000
2.36" (60 mm)	2.36" (60 mm)	0.98" (25 mm)	27	Sleeve	15° to 155°	32	0.15	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, C-UL Recognized Component	0000000	0000
2.36" (60 mm)	2.36" (60 mm)	0.98" (25 mm)	33	Ball	0° to 155°	43	0.29	Plastic	Plastic	No	0.15" (3.8 mm)	UL Recognized Component, CSA Certified	00000000	00000
2.36" (60 mm)	2.36" (60 mm)	1.26" (32 mm)	41	Ball	0° to 155°	53	0.64	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	00000000	00000
2.76" (70 mm)	2.76" (70 mm)	0.59" (15 mm)	19	Sleeve	15° to 155°	22	0.10	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, C-UL Recognized Component	0000000	0000
3.15" (80 mm)	3.15" (80 mm)	0.98" (25 mm)	23	Sleeve	15° to 155°	21	0.05	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, C-UL Recognized Component	0000000	0000
3.15" (80 mm)	3.15" (80 mm)	0.98" (25 mm)	26	Ball	0° to 175°	21	0.05	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	0000000	00000
3.15" (80 mm)	3.15" (80 mm)	0.98" (25 mm)	34	Ball	0° to 165°	27	0.09	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified, C-UL Recognized Component	00000000	00000
3.15" (80 mm)	3.15" (80 mm)	0.98" (25 mm)	40	Sleeve	0° to 155°	32	0.17	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	0000000	00000
3.15" (80 mm)	3.15" (80 mm)	0.98" (25 mm)	46	Ball	0° to 155°	37	0.18	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	0000000	00000
3.15" (80 mm)	3.15" (80 mm)	1.26" (32 mm)	18	Ball	0° to 145°	22	0.10	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	0000000	00000
3.15" (80 mm)	3.15" (80 mm)	1.26" (32 mm)	31	Ball	0° to 165°	35	0.22	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	0000000	00000
3.15" (80 mm)	3.15" (80 mm)	1.26" (32 mm)	47	Ball	0° to 140°	48	0.53	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified, C-UL Recognized Component	00000000	00000
3.15" (80 mm)	3.15" (80 mm)	1.5" (38 mm)	77	Ball	0° to 155°	55	0.83	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	0000000	00000
3.15" (80 mm)	3.15" (80 mm)	1.5" (38 mm)	110	Ball	0° to 155°	65	2.08	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	00000000	000000
3.15" (80 mm)	3.15" (80 mm)	1.5" (38 mm)	130	Ball	0° to 155°	71	3.25	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	00000000	000000
3.62" (92 mm)	3.62" (92 mm)	0.98" (25 mm)	28	Sleeve	15° to 155°	18	0.05	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, C-UL Recognized Component	0000000	0000
3.62" (92 mm)	3.62" (92 mm)	0.98" (25 mm)	36	Ball	0° to 185°	23	0.07	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified, C-UL Recognized Component	00000000	00000
3.62" (92 mm)	3.62" (92 mm)	0.98" (25 mm)	49	Ball	0° to 155°	32	0.18	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	0000000	00000
3.62" (92 mm)	3.62" (92 mm)	0.98" (25 mm)	51	Sleeve	15° to 155°	34	0.16	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, C-UL Recognized Component	0000000	0000
3.62" (92 mm)	3.62" (92 mm)	0.98" (25 mm)	60	Ball	0° to 140°	39	0.24	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	0000000	00000
3.62" (92 mm)	3.62" (92 mm)	1.26" (32 mm)	55	Ball	0° to 165°	38	0.23	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	0000000	00000
3.62" (92 mm)	3.62" (92 mm)	1.5" (38 mm)	77	Ball	0° to 155°	51	0.63	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified, C-UL Recognized Component	00000000	00000
3.62" (92 mm)	3.62" (92 mm)	1.5" (38 mm)	86	Ball	0° to 155°	55	0.75	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified, C-UL Recognized Component	00000000	00000
3.62" (92 mm)	3.62" (92 mm)	1.5" (38 mm)	135	Ball	0° to 155°	69	2.50	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	0000000	000000
3.62" (92 mm)	3.62" (92 mm)	1.5" (38 mm)	160	Ball	0° to 155°	73	4.17	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	0000000	000000
4.69" (119 mm)	4.69" (119 mm)	0.98" (25 mm)	82	Ball	0° to 165°	38	0.27	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	0000000	00000
4.69" (119 mm)	4.69" (119 mm)	0.98" (25 mm)	99	Ball	0° to 140°	43	0.44	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified, C-UL Recognized Component	00000000	00000
4.69" (119 mm)	4.69" (119 mm)	0.98" (25 mm)	130	Ball	0° to 155°	55	1.00	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	0000000	00000
4.69" (119 mm)	4.69" (119 mm)	1.5" (38 mm)	88	Ball	0° to 175°	37	0.21	Plastic	Plastic	No	0.18" (4.6 mm)	UL Recognized Component, CSA Certified	0000000	00000
4.69" (119 mm)	4.69" (119 mm)	1.5" (38 mm)	205	Ball	0° to 145°	67	2.67	Aluminum	Plastic	No	0.15" (3.8 mm)	UL Recognized Component, CSA Certified	0000000	00000
4.72" (120 mm)	4.72" (120 mm)	0.98" (25 mm)	108	Sleeve	15° to 155°	45	0.40	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, C-UL Recognized Component	0000000	00000
5" (127 mm)	5" (127 mm)	1.5" (38 mm)	125	Ball	0° to 155°	46	0.50	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	00000000	00000
5" (127 mm)	5" (127 mm)	1.5" (38 mm)	145	Ball	0° to 155°	51	0.82	Plastic	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	0000000	00000
5.32" (135 mm)	5.32" (135 mm)	1.5" (38 mm)	153	Ball	-10° to 160°	48	0.79	Aluminum	Steel	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified, C-UL Recognized Component	00000000	000000
5.51" (140 mm)	5.51" (140 mm)	2" (50.8 mm)	241	Ball	0° to 155°	70	3.40	Aluminum	Plastic	No	0.16" (4 mm)	UL Recognized Component, CSA Certified, C-UL Recognized Component	00000000	000000
12V DC—Quick-Disconnect Terminals with Male Fan Plug
4.69" (119 mm)	4.69" (119 mm)	1.5" (38 mm)	105	Ball	-20° to 165°	49	0.38	Aluminum	Plastic	No	0.15" (3.8 mm)	UL Recognized Component, CSA Certified	0000000	00000

Square—For 3D Printers

	Overall
For 3D Printer Part Trade Name	Ht.	Wd.	Dp.	Airflow, cfm	Bearing Type	Temp. Range, °F	Volume, dBA	Current, A	Frame Material	Blade Material	Mounting Fasteners Included	Mounting Hole Dia.	Compatible With		Each
12V DC—2-Pin Connector (Male Connection)
V6, Volcano	1.18" (30 mm)	1.18" (30 mm)	0.39" (10 mm)	4	Ball	15° to 155°	35.6	0.15	Plastic	Plastic	No	0.12" (3 mm)	__	00000000	000000
Mosquito	0.98" (25 mm)	0.98" (25 mm)	0.39" (10 mm)	3	Ball	32° to 120°	31	0.10	Plastic	Plastic	Yes	0.12" (3 mm)	Molex Micro-Fit 3.0	00000000	00000

Round

Overall
Dia.	Dp.	Airflow, cfm	Bearing Type	Temp. Range, °F	Volume, dBA	Current, A	Frame Material	Blade Material	Mounting Fasteners Included	Mounting Hole Dia.	Specifications Met		Each
12V DC—Wire Leads
5.91" (150 mm)	1.5" (38 mm)	181	Ball	-10° to 160°	53	1.00	Aluminum	Aluminum	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	0000000	0000000
5.91" (150 mm)	2.17" (55 mm)	210	Ball	-10° to 160°	53	1.00	Aluminum	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	0000000	000000
12V DC—Quick-Disconnect Terminals with Male Fan Plug
6.77" (172 mm)	2" (50.8 mm)	205	Ball	0° to 160°	49	1.00	Aluminum	Plastic	No	0.17" (4.3 mm)	UL Recognized Component, CSA Certified	00000000	000000

DC Wet-Location Equipment-Cooling Fans

Operate these fans with a DC power source. Also known as muffin fans, they keep heat-sensitive equipment such as electronic components cool. All have ball bearings to lower the heat that is generated from the fans for a longer service life.

For technical drawings and 3-D models, click on a part number.

Overall
Ht.	Wd.	Dp.	Airflow, cfm	Temp. Range, °F	Volume, dBA	Current, A	Frame Material	Blade Material	Bearing Type	Mounting Fasteners Included	Mounting Hole Dia.	Environmental Rating		Each
Square
12V DC—Wire Leads
2.36" (60 mm)	2.36" (60 mm)	0.98" (25 mm)	25	15° to 155°	32.3	0.50	Plastic	Plastic	Ball	No	0.169" (4.3 mm)	IP58	00000000	000000
2.76" (70 mm)	2.76" (70 mm)	0.98" (25 mm)	40	15° to 155°	37	0.14	Plastic	Plastic	Ball	No	0.169" (4.3 mm)	IP58	00000000	00000
3.15" (80 mm)	3.15" (80 mm)	0.98" (25 mm)	50	15° to 155°	40.1	0.48	Plastic	Plastic	Ball	No	0.169" (4.3 mm)	IP58	00000000	00000
3.15" (80 mm)	3.15" (80 mm)	1.26" (32 mm)	69	15° to 155°	48	0.50	Plastic	Plastic	Ball	No	0.169" (4.3 mm)	IP58	00000000	00000
3.62" (92 mm)	3.62" (92 mm)	0.98" (25 mm)	57	15° to 155°	38	0.35	Plastic	Plastic	Ball	No	0.169" (4.3 mm)	IP58	00000000	00000
4.72" (120 mm)	4.72" (120 mm)	0.98" (25 mm)	86	15° to 155°	36	0.81	Plastic	Plastic	Ball	No	0.169" (4.3 mm)	IP57	00000000	00000
4.72" (120 mm)	4.72" (120 mm)	1.5" (38 mm)	119	15° to 155°	41	0.60	Plastic	Plastic	Ball	No	0.18" (4.6 mm)	IP58	0000000	000000

High-Pressure Washdown DC Equipment-Cooling Fans

Keep electronics from overheating in places that must be sanitized often. These DC-powered fans are rated IP69K, meaning you won’t damage them with harsh jets of water and they block out dust. For a long life, all have ball bearings that reduce friction and heat as they operate. Also called muffin fans.

For technical drawings and 3-D models, click on a part number.

Square

Overall
Height, mm	Width, mm	Depth, mm	Airflow, cfm	Volume, dBA	Current, A	Mounting Fasteners Included	Mounting Hole Diameter, mm	Environmental Rating	Specifications Met		Each
Plastic Frame with Plastic Blades
12V DC—Wire Leads
60	60	25	25	30	0.15	No	4.3	IP69K	CE Marked, UL Recognized Component	0000000	000000
80	80	25	40	33	0.18	No	4.3	IP69K	CE Marked, UL Recognized Component	0000000	00000
80	80	32	77	50.1	0.65	No	4.1	IP69K	CE Marked, UL Recognized Component	0000000	00000
80	80	38	71	50.1	0.60	No	4.3	IP69K	CE Marked, UL Recognized Component	0000000	00000
92	92	25	50	35	0.29	No	4.3	IP69K	CE Marked, UL Recognized Component	0000000	00000
120	120	25	120	42	0.45	No	4.4	IP69K	CE Marked, UL Recognized Component	0000000	00000
120	120	38	124	44.1	0.50	No	4.3	IP69K	CE Marked, UL Recognized Component	0000000	00000

Oblong

Overall
Height, mm	Width, mm	Depth, mm	Airflow, cfm	Volume, dBA	Current, A	Mounting Fasteners Included	Mounting Hole Diameter, mm	Environmental Rating	Specifications Met		Each
Aluminum Frame with Plastic Blades
12V DC—Wire Leads
151	172	51	263	57	1.10	No	4.5	IP69K	CE Marked, UL Recognized Component	0000000	0000000

Submersible DC Equipment-Cooling Fans

Keep electronics cool in wet areas. These fans withstand weather, washdowns, and occasional time spent underwater. A ball bearing keeps them running smoothly and quietly, reducing friction to increase their lifespan.

For technical drawings and 3-D models, click on a part number.

Square

Overall
Height	Width	Depth	Airflow, cfm	Temp. Range, °F	Volume, dBA	Current, A	Mounting Fasteners Included	Mounting Hole Diameter	Environmental Rating	Specifications Met		Each
Plastic Frame with Plastic Blades
12V DC, Wire Leads
2.36" (60 mm)	2.36" (60 mm)	1.5" (38 mm)	58	15° to 155°	59	1.35	No	0.17" (4.4 mm)	IP68	UL Recognized Component CE Marked TUV Rheinland Certified	0000000	000000
3.15" (80 mm)	3.15" (80 mm)	0.99" (25.2 mm)	71	15° to 155°	50	0.72	No	0.17" (4.4 mm)	IP68	UL Recognized Component CE Marked TUV Rheinland Certified	0000000	00000
3.62" (92 mm)	3.62" (92 mm)	0.98" (25 mm)	58	15° to 155°	43	0.27	No	0.17" (4.4 mm)	IP68	UL Recognized Component CE Marked TUV Rheinland Certified	0000000	00000
4.72" (120 mm)	4.72" (120 mm)	0.98" (25 mm)	80	15° to 155°	41	0.65	No	0.17" (4.4 mm)	IP68	UL Recognized Component CE Marked TUV Rheinland Certified	0000000	00000

Edge-Flow Equipment-Cooling Blowers

For use in tight spaces where other equipment-cooling blowers won't fit, air enters through the center of these blowers and then expels along the edges. They create a more concentrated stream of air than equipment-cooling fans to blow away the heat generated by electronic equipment, induction heaters, and high-wattage bulbs. Use them to keep heat-sensitive equipment such as electronic components cool.

Square blowers have UL recognized components and are CSA certified.

For technical drawings and 3-D models, click on a part number.

Square

Overall
Ht.	Wd.	Dp.	Temp. Range, °F	Airflow, cfm	Volume, dBA	Motor Speed, rpm	Current, A		Each
12V DC—Wire Leads
5.31" (135 mm)	5.31" (135 mm)	1.5" (38.1 mm)	-20° to 165°	32	55	2,200	0.5	0000000	0000000
7.09" (180 mm)	7.09" (180 mm)	1.6" (40.64 mm)	-20° to 165°	52	58	2,550	0.4	0000000	000000

Wide-Flow Equipment-Cooling Blowers

Also known as crossflow blowers, these create a wider stream of concentrated air than other equipment-cooling blowers to blow away the heat generated by electronic equipment, induction heaters, and high-wattage bulbs. Use them to keep heat-sensitive equipment such as electronic components cool. All have UL recognized components and are CSA certified.

For technical drawings and 3-D models, click on a part number.

Overall			Outlet
Ht.	Wd.	Dp.	Ht.	Wd.	Airflow, cfm	Temp. Range, °F	Volume, dBA	Motor Speed, rpm	Current, A		Each
Rectangular
12V DC—Wire Leads
2" (50.8 mm)	16.25" (412.75 mm)	1.88" (47.63 mm)	0.63" (15.88 mm)	13.88" (352.43 mm)	91	-4° to 140°	51	3,600	0.8	0000000	0000000

Bench-Top DC Fans

With Slotted Guard

With Honeycomb Guard

Mount these fans on a bench top or in a vehicle.

Ball-and-socket swivel base fans easily adjust with a thumb screw and do not oscillate, so they are ideal for applications where you need to move your fan frequently. However, they may loosen in applications with frequent vibration. Adjustable-tension swivel base fans tighten into place with an L-key and a wrench, so they are ideal for applications with frequent vibration. However, they are not as easy to reposition as fans with a ball-and-socket swivel base.

Slotted guards prevent debris and other objects from coming into contact with the fan blade. Honeycomb guards prevent fingers and small objects from coming into contact with the fan blade.

For technical drawings and 3-D models, click on a part number.

Ball-and-Socket Swivel Base

					Overall
Voltage	Blade Dia.	Airflow, cfm	No. of Speeds	Current, A	Ht.	Wd.	Dp.	Electrical Connection	Fan Head Movement	Blade Material	Guard Material	Mounting Fasteners Included		Each
Black Powder-Coated Steel Rectangular Base
Slotted Guard
12V DC	6 1/2"	270	2	2.7	9"	8"	5"	Hardwire	Non-Oscillating	Aluminum	Chrome-Plated Steel	Yes	00000000	000000
Black Powder-Coated Steel Round Base
Slotted Guard
12V DC	6 1/2"	270	2	2.7	9"	8"	5"	Hardwire	Non-Oscillating	Aluminum	Chrome-Plated Steel	Yes	00000000	000000
Honeycomb Guard
12V DC	6 1/2"	270	2	2.7	9"	8"	5"	Hardwire	Non-Oscillating	Aluminum	Black Powder-Coated Steel	Yes	00000000	000000

Adjustable-Tension Swivel Base

					Overall
Voltage	Blade Dia.	Airflow, cfm	No. of Speeds	Current, A	Ht.	Wd.	Dp.	Electrical Connection	Fan Head Movement	Blade Material	Guard Material	Mounting Fasteners Included		Each
Zinc-Plated Steel Rectangular Base
Slotted Guard
12V DC	6 1/2"	270	2	2.7	9 3/4"	7 1/2"	5 1/2"	Hardwire	Non-Oscillating	Aluminum	Chrome-Plated Steel	Yes	00000000	0000000
Black Powder-Coated Steel Rectangular Base
Slotted Guard
12V DC	6 1/2"	270	2	2.7	9 3/4"	7 1/2"	5 1/2"	Hardwire	Non-Oscillating	Aluminum	Black Powder-Coated Steel	Yes	00000000	000000
Black Powder-Coated Steel Round Base
Slotted Guard
12V DC	6 1/2"	270	2	2.7	9 1/4"	7 1/2"	5 1/2"	Hardwire	Non-Oscillating	Aluminum	Chrome-Plated Steel	Yes	00000000	000000

Slotted Guards

	Black		Silver
Material		Each		Each
Powder-Coated Steel	00000000	000000	00000000	000000

Replacement Honeycomb Guards

Material	Color		Each
Powder-Coated Steel	Black	00000000	000000

DC Heater and Air Conditioner Duct Booster Fans

Often used in vehicles, these fans operate on DC power. Insert them directly into your ductwork. They give small heaters and air conditioners a boost to circulate air through ductwork. All have a totally enclosed motor enclosure, which can be used in dirty, dusty, and damp environments.

Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

			Overall
For Duct Dia.	Airflow @ Static Pressure	Volume	Ht.	Wd.	Dp.	Max. Temp., °F	Housing Material	Blade Material	Mounting Fasteners Included	Mounting Hole Dia.		Each
12V DC—Hardwire
3"	130 cfm @ 0 in. of H₂O	65 dBA @ 15 ft.	3 3/16"	5"	5 1/4"	200°	Polypropylene Plastic	Polypropylene Plastic	No	3/16"	00000000	000000
4"	230 cfm @ 0 in. of H₂O	69 dBA @ 15 ft.	4 3/16"	6"	5 1/4"	200°	Polypropylene Plastic	Polypropylene Plastic	No	3/16"	00000000	00000

DC Blowers

Operate these blowers with a DC power source, such as your vehicle battery. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting.

Blowers with a totally enclosed motor enclosure can be used in dirty, dusty, and damp environments.

Blowers with a multidirection mounting bracket can be rotated to discharge air in any direction.

Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

For technical drawings and 3-D models, click on a part number.

			Outlet					Overall
Airflow @ Static Pressure	Volume, dB	Motor Speed, rpm	Dia.	Ht.	Wd.	Inlet Dia.	Wheel Dia.	Ht.	Wd.	Dp.	Min. Temp., °F	Max. Temp., °F	Mount. Fasteners Included	Mount. Hole Dia.	Includes		Each
With Rectangular Outlet and Round Inlet—Open Motor Enclosure
12V DC—Hardwire
290 cfm @ 0 in. of H₂O	Not Rated	3,700	__	4 1/8"	2 3/16"	3 3/8"	4 7/16"	5 1/2"	6 9/16"	5 1/4"	-40°	175°	No	3/16"	__	0000000	000000
375 cfm @ 0 in. of H₂O	Not Rated	3,950	__	2 1/8"	4 1/8"	3"	3 1/4"	5"	4 1/2"	14"	-40°	175°	No	1/4"	__	0000000	00000
With Round Outlet and Round Inlet—Totally Enclosed Motor Enclosure
12V DC—Hardwire
105 cfm @ 0 in. of H₂O	60	3,500	3"	__	__	3"	3"	5 1/2"	5"	6 3/4"	Not Rated	130°	No	1/4"	Multidirection Mounting Bracket	0000000	000000
250 cfm @ 0 in. of H₂O	66	2,500	4"	__	__	4"	4"	9 5/8"	9 1/4"	8 3/4"	Not Rated	130°	No	1/4"	Multidirection Mounting Bracket	0000000	000000

DC Enclosure-Cooling Fans

Operate these fans with a DC power source. They protect equipment in enclosures and cabinets from heat. All of these fans are reversible to exhaust hot air out or draw cooler outside air in.

For technical drawings and 3-D models, click on a part number.

Round
Overall Dia.	Airflow, cfm	Motor Speed, rpm	Current, A	Blade Material	Guard Material	Mounting Fasteners Included	Mounting Hole Dia.		Each
12V DC—Wire Leads
12"	950	2,700	7.9	Plastic	Plastic	No	1/4"	0000000	0000000
14 3/8"	1,100	2,300	7.7	Plastic	Plastic	No	1/4"	0000000	000000
15 9/16"	1,500	2,200	10.1	Plastic	Plastic	No	1/4"	0000000	000000
17 1/16"	2,100	2,700	18.0	Plastic	Plastic	No	1/4"	0000000	000000

Thermoelectric Coolers for Enclosures

Cooler Shown with Extension Bracket Installed

Cooler

Extension Bracket

Drain Kit

Also known as Peltier coolers, these coolers use electrical current to transfer heat away from your enclosure while sealing out contaminants. They cool the enclosure to below the ambient temperature. The solid-state thermoelectric components require no maintenance and take up less space than an air conditioner or heat exchanger.

Rated IP66 and NEMA 4X, these coolers withstand weather, washdowns, and corrosive environments. They meet American and European safety standards.

Coolers without a thermostat run continuously when powered. Add a thermostat, timer, or switch to turn them on and off.

An optional extension bracket holds the cooler away from the enclosure wall for more space inside the enclosure.

Add a drain kit to remove moisture when condensation is likely, such as in humid environments and enclosures exposed to rapid temperature changes. The included hose directs water away from electrical components.

For technical drawings and 3-D models, click on a part number.

Coolers
				Overall			For Opening						Extension Brackets		Drain Kits
Cooling Capacity, Btu/hr.	Airflow, cfm	Wattage, W	Current, A	Height	Width	Depth	Height	Width	Environment	Mounting Fasteners Included		Each		Each		Each
Without Thermostat
12V DC—Terminal Block
100	10	30	2.9	4 5/16"	6 1/8"	5"	3 9/16"	4 13/16"	Corrosive, Outdoor, Washdown, Wet Location	Yes	0000000	0000000	0000000	000000	0000000	0000000