Voltage Voltage | Show |
|---|
|
Voltage Voltage | Hide |
|---|
Electrical Connection Type Electrical Connection Type |
|---|
|
System of Measurement System of Measurement |
|---|
|
Overall Height Overall Height |
|---|
Overall Width Overall Width |
|---|
Airflow Airflow |
|---|
Environment Environment |
|---|
|
|
Specifications Met Specifications Met |
|---|
|
Current Current |
|---|
|
|
|
Electrical Phase Electrical Phase |
|---|
|
Environmental Rating Environmental Rating |
|---|
Maximum Temperature Maximum Temperature |
|---|
|
Mounting Location Mounting Location |
|---|
|
|
Mounting Hole Diameter Mounting Hole Diameter |
|---|
|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Thermostat Included Thermostat Included |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
About Sound Levels
Measured in decibels (dB), volume ratings indicate how much noise equipment makes. Some common volume levels include a whisper @ 20 dB, a refrigerator @ 40 dB, a conversation @ 60 dB, and a light machine shop @ 90 dB. OSHA recommends hearing protection for exposure to 80 dB and greater.
About Calculating the Airflow Required for Air Cleaning
More
About Sound Levels
To choose an alarm or speaker that’s loud enough, first determine the decibel (dB) rating of background noise.
More
Hazardous Location Equipment-Cooling Fans
Safely cool electronics and equipment where explosive gases could be present due to equipment failure. ATEX certified, these fans meet European standards for hazardous locations. They’re also IP rated, so they seal out dust and are protected from water if briefly submersed. All have ball bearings that decrease noise for quiet operation. Their bearings reduce heat as they run as well, extending their life.
For technical drawings and 3-D models, click on a part number.
Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Height | Width | Depth | Airflow, cfm | Temp. Range, °F | Volume, dBA | Current, A | Frame Material | Blade Material | Mounting Fasteners Included | Mounting Hole Diameter | Environmental Rating | Specifications Met | Each | |
Square | ||||||||||||||
100-240V AC, Single Phase, 50Hz/60Hz—Quick-Disconnect Terminals | ||||||||||||||
| 4.72" (120 mm) | 4.72" (120 mm) | 1.52" (38 mm) | 124 | 0° to 155° | 49 | 0.18 | Plastic | Plastic | No | 0.17" (4.3 mm) | IP68 IEC Zone 2 Groups IIC, IIB, IIA | ATEX II 3 G Ex ec IIC Gc C-UL Recognized Component CE Marked TUV Rheinland Certified UL Recognized Component | 0000000 | 000000 |
100-240V AC, Single Phase, 50Hz/60Hz—Wire Leads | ||||||||||||||
| 4.72" (120 mm) | 4.72" (120 mm) | 1.52" (38 mm) | 124 | 0° to 155° | 49 | 0.18 | Plastic | Plastic | No | 0.17" (4.3 mm) | IP68 IEC Zone 2 Groups IIC, IIB, IIA | ATEX II 3 G Ex ec IIC Gc C-UL Recognized Component CE Marked TUV Rheinland Certified UL Recognized Component | 0000000 | 00000 |
Oblong | ||||||||||||||
210-240V AC, Single Phase, 50Hz/60Hz—Wire Leads | ||||||||||||||
| 5.91" (150 mm) | 6.77" (172 mm) | 2.01" (51 mm) | 220 | 0° to 155° | 57 | 0.13 | Aluminum | Plastic | No | 0.16" (4.4 mm) | IP68 IEC Zone 2 Groups IIC, IIB, IIA | ATEX II 3 G Ex nA IIC Gc C-UL Recognized Component CE Marked TUV Rheinland Certified UL Recognized Component | 0000000 | 000000 |
Wet-Location Equipment-Cooling Fans
Able to withstand dust and water splashes, these fans are IP rated. Also known as muffin fans, they keep heat-sensitive equipment such as electronic components cool. All have ball bearings to lower the heat that is generated from the fans for a longer service life. They also have UL recognized components.
IP55-rated fans can also stand up to washdowns from low-pressure jets of water.
Install fans with wire leads directly to your power source—there’s no need for additional connectors.
Use fans with quick-disconnect terminals to quickly connect and disconnect wiring from the terminal. Optional quick-disconnect power cords allow you to add a NEMA plug to these fans, so you can connect them to a standard outlet.
For technical drawings and 3-D models, click on a part number.
Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Dp. | Airflow, cfm | Temp. Range, °F | Volume, dBA | Current, A | Frame Material | Blade Material | Bearing Type | Mounting Fasteners Included | Mounting Hole Dia. | Environmental Rating | Each | |
200-240V AC, Single Phase, 50Hz/60Hz—Wire Leads | ||||||||||||||
| 3.15" (80 mm) | 3.15" (80 mm) | 1.5" (38 mm) | 28 33 | -20° to 175° | 35.3 | 0.06 0.05 | Aluminum | Steel | Ball | No | 0.169" (4.3 mm) | IP55 | 0000000 | 000000 |
| 3.62" (92 mm) | 3.62" (92 mm) | 1.5" (38 mm) | 45 55 | -20° to 175° | 40.1 | 0.07 0.06 | Aluminum | Steel | Ball | No | 0.165" (4.2 mm) | IP55 | 0000000 | 00000 |
| 4.72" (120 mm) | 4.72" (120 mm) | 1.52" (38.5 mm) | 90 105 | -20° to 175° | 48 | 0.09 0.04 | Aluminum | Steel | Ball | No | 0.177" (4.5 mm) | IP55 | 0000000 | 00000 |
| 5" (127 mm) | 5" (127 mm) | 1.52" (38.5 mm) | 110 128 | -20° to 175° | 48 | 0.12 0.11 | Aluminum | Steel | Ball | No | 0.177" (4.5 mm) | IP55 | 0000000 | 00000 |
200-240V AC, Single Phase, 50Hz/60Hz—Quick-Disconnect Terminals | ||||||||||||||
| 3.15" (80 mm) | 3.15" (80 mm) | 1.5" (38 mm) | 28 33 | -20° to 175° | 35.3 | 0.06 0.05 | Aluminum | Steel | Ball | No | 0.169" (4.3 mm) | IP55 | 0000000 | 00000 |
| 3.62" (92 mm) | 3.62" (92 mm) | 1.5" (38 mm) | 45 55 | -20° to 175° | 40.1 | 0.07 0.06 | Aluminum | Steel | Ball | No | 0.165" (4.2 mm) | IP55 | 0000000 | 00000 |
| 4.72" (120 mm) | 4.72" (120 mm) | 1.52" (38.5 mm) | 90 105 | -20° to 175° | 48 | 0.09 0.04 | Aluminum | Steel | Ball | No | 0.177" (4.5 mm) | IP55 | 0000000 | 00000 |
| 5" (127 mm) | 5" (127 mm) | 1.52" (38.5 mm) | 110 128 | -20° to 175° | 48 | 0.12 0.11 | Aluminum | Steel | Ball | No | 0.177" (4.5 mm) | IP55 | 0000000 | 00000 |
Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Dp. | Airflow, cfm | Temp. Range, °F | Volume, dBA | Current, A | Frame Material | Blade Material | Bearing Type | Mounting Fasteners Included | Mounting Hole Dia. | Environmental Rating | Each | |
200-240V AC, Single Phase, 50Hz/60Hz—Wire Leads | |||||||||||||
| 6.77" (172 mm) | 2.01" (51 mm) | 190 215 | -20° to 175° | 59 | 0.20 0.18 | Aluminum | Steel | Ball | No | 0.177" (4.5 mm) | IP55 | 0000000 | 000000 |
| 6.77" (172 mm) | 2.17" (55 mm) | 183 210 | -20° to 175° | 58.1 | 0.20 0.18 | Aluminum | Steel | Ball | No | 0.177" (4.5 mm) | IP55 | 0000000 | 00000 |
Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Dp. | Airflow, cfm | Temp. Range, °F | Volume, dBA | Current, A | Frame Material | Blade Material | Bearing Type | Mounting Fasteners Included | Mounting Hole Dia. | Environmental Rating | Each | |
200-240V AC, Single Phase, 50Hz/60Hz—Wire Leads | ||||||||||||||
| 6.77" (172 mm) | 5.91" (150 mm) | 2.01" (51 mm) | 185 210 | -20° to 175° | 58 | 0.20 0.18 | Aluminum | Steel | Ball | No | 0.169" (4.3 mm) | IP55 | 0000000 | 000000 |
Battery-Powered Portable Fans
Cool down areas where you don't have an outlet—these fans are lightweight and battery-powered so you can tote them anywhere. The battery and charger are sold separately. You can also connect these fans to an electrical outlet with an extension cord (not included).
Enclosure Spot-Cooling Fans
Aim a stream of air at hot spots and equipment inside your enclosure to prevent overheating. Unlike other enclosure fans, they circulate air within your enclosure, so you don’t need to cut out an air intake. For precise adjustment, tilt the housing and spin the fan head to direct air where you need it. Use a thermostat, timer, or switch to turn fans on and off.
DIN-rail-mount fans snap onto DIN rail in four orientations with a dual DIN clip. Surface-mount fans can be screwed into the enclosure in any orientation.
Fans meet American, Canadian, or European safety standards. They also meet UL 94 V-0, so if they catch fire, they self-extinguish within 10 seconds and won’t spread the fire by dripping. Rated IP20, they’re designed so fingers can’t fit inside and get shocked.
For technical drawings and 3-D models, click on a part number.
Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mount Type | Airflow, cfm | Volume, dBA | Motor Speed, rpm | Current, A | Depth | Width | Height | Blade Material | Housing Material | For DIN Rail Height, mm | Mounting Fasteners Included | Mounting Hole Diameter | Environmental Rating | Specifications Met | Each | |
120-240V AC, Single Phase, 50Hz/60Hz—Spring-Clamp Terminals | ||||||||||||||||
| DIN Rail | 16 | 44 | 12,500 | 0.2 | 5 3/8" | 2" | 2 3/8" | Plastic | Plastic | 35 | __ | __ | IP20 | CE Marked, C-UL Recognized Component, UL Recognized Component, UL 94 V-0, VDE Certified | 0000000 | 0000000 |
| Surface | 16 | 44 | 12,500 | 0.2 | 5 3/16" | 2" | 2 3/8" | Plastic | Plastic | __ | No | 0.24" | IP20 | CE Marked, C-UL Recognized Component, UL Recognized Component, UL 94 V-0, VDE Certified | 0000000 | 000000 |
Electric Blowguns for Large Areas
Clear dust and debris, test air ducts for leaks, and dry large surfaces without needing a compressed air line. Volume (dBA) is measured 3 ft. from the blowgun at 100 psi.
Attach the optional vacuum kit (sold separately) to convert the blowgun to a handheld vacuum.
High-Volume Hot Air Blowers
Blast your heating, drying, and shrinking projects with hot air to get the job done quickly. These blowers tilt 90° for directing airflow.
Use the optional curved-tip nozzle for installing heat-shrink tubing.
Hot Air Blowers | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
O'all | Replacement Heating Elements | |||||||||||||||
| Temp. Setting, °F | Airflow, cfm | Tip Dia. | Nozzle Lg. | Lg. | Wd. | Ht. | Wattage, W | Heating Element Material | Housing Material | Plug Type | NEMA Style | Specifications Met | Each | Each | ||
240V AC | ||||||||||||||||
| 300° | 47 | 1 7/8" | 6 1/4" | 12" | 6" | 9" | 1,200 | Mica | Steel | Three Prong | 6-15 | C-UL Listed, UL Listed | 0000000 | 0000000 | 00000000 | 000000 |
| 500° | 47 | 1 7/8" | 6 1/4" | 12" | 6" | 9" | 1,680 | Mica | Steel | Three Prong | 6-15 | C-UL Listed, UL Listed | 0000000 | 000000 | 00000000 | 00000 |
| 750° | 47 | 1 7/8" | 6 1/4" | 12" | 6" | 9" | 2,160 | Mica | Steel | Three Prong | 6-15 | C-UL Listed, UL Listed | 0000000 | 000000 | 00000000 | 00000 |
| For Max. Tube OD | Lg. | Tip Wd. | Each | |
| 2" | 4" | 3 1/4" | 0000000 | 000000 |
High-Temperature Hot Air Blowers
Use these blowers for production drying, heat-shrinking, and other applications requiring heat over 1000° F.
Hot Air Blowers | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
O'all | Replacement Heating Elements | |||||||||||||
| Temp. Setting, °F | Airflow, cfm | Tip Dia. | Nozzle Lg. | Lg. | Wd. | Ht. | Wattage, W | Heating Element Material | Housing Material | Electrical Connection Type | Each | Each | ||
240V AC | ||||||||||||||
Fixed Airflow | ||||||||||||||
| 72° to 1200° | 14.1 | 2" | 5 7/16" | 13 3/4" | 3 1/2" | 3 1/2" | 4,500 | Ceramic | Plastic | Hardwire | 000000 | 0000000 | 0000000 | 0000000 |
Adjustable Airflow | ||||||||||||||
| 70° to 1165° | 7.1-31.8 | 2 1/2" | 5 1/4" | 13" | 4" | 7" | 3,700 | Ceramic | Plastic | Hardwire | 000000 | 00000000 | 000000 | 000000 |
| 70° to 1345° | 7.1-31.8 | 2 1/2" | 5 1/4" | 14" | 4" | 7" | 3,100 | Ceramic | Plastic | Hardwire | 000000 | 00000000 | 000000 | 000000 |
Static-Eliminating Bars
Also known as ionizing bars, these bars remove static from moving materials on conveyors and assembly lines where there is little or no air movement. Mount bars 1" to 7" from the material. Do not mount directly over metal parts or rollers; the metal will absorb the ion charge and reduce the effectiveness of the bar.
Power supplies are required and can operate up to two static-eliminating bars.
Optional bar tester indicates whether your static eliminator is operating.
For technical drawings and 3-D models, click on a part number.
Static Control | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Dp. | Ht. | Wd. | Dp. | Voltage | Power Cord Lg., ft. | Features | Each | |
| 6" | 7" | 1 3/8" | 6" | 3/4" | 120V AC/240V AC | 6 1/2 | Grounding Cord with Ring Terminal | 0000000 | 0000000 |
| 9" | 7" | 1 3/8" | 9" | 3/4" | 120V AC/240V AC | 6 1/2 | Grounding Cord with Ring Terminal | 0000000 | 000000 |
| 12" | 7" | 1 3/8" | 12" | 3/4" | 120V AC/240V AC | 6 1/2 | Grounding Cord with Ring Terminal | 0000000 | 000000 |
| 15" | 7" | 1 3/8" | 15" | 3/4" | 120V AC/240V AC | 6 1/2 | Grounding Cord with Ring Terminal | 0000000 | 000000 |
| 18" | 7" | 1 3/8" | 18" | 3/4" | 120V AC/240V AC | 6 1/2 | Grounding Cord with Ring Terminal | 0000000 | 000000 |
| 20" | 7" | 1 3/8" | 20" | 3/4" | 120V AC/240V AC | 6 1/2 | Grounding Cord with Ring Terminal | 0000000 | 000000 |
| 24" | 7" | 1 3/8" | 24" | 3/4" | 120V AC/240V AC | 6 1/2 | Grounding Cord with Ring Terminal | 0000000 | 000000 |
| 30" | 7" | 1 3/8" | 30" | 3/4" | 120V AC/240V AC | 6 1/2 | Grounding Cord with Ring Terminal | 0000000 | 000000 |
| 33" | 7" | 1 3/8" | 33" | 3/4" | 120V AC/240V AC | 6 1/2 | Grounding Cord with Ring Terminal | 0000000 | 000000 |
| 36" | 7" | 1 3/8" | 36" | 3/4" | 120V AC/240V AC | 6 1/2 | Grounding Cord with Ring Terminal | 0000000 | 000000 |
| 42" | 7" | 1 3/8" | 42" | 3/4" | 120V AC/240V AC | 6 1/2 | Grounding Cord with Ring Terminal | 0000000 | 000000 |
| 48" | 7" | 1 3/8" | 48" | 3/4" | 120V AC/240V AC | 6 1/2 | Grounding Cord with Ring Terminal | 0000000 | 000000 |
| 60" | 7" | 1 3/8" | 60" | 3/4" | 120V AC/240V AC | 6 1/2 | Grounding Cord with Ring Terminal | 0000000 | 000000 |
| 66" | 7" | 1 3/8" | 66" | 3/4" | 120V AC/240V AC | 6 1/2 | Grounding Cord with Ring Terminal | 0000000 | 000000 |
| 72" | 7" | 1 3/8" | 72" | 3/4" | 120V AC/240V AC | 6 1/2 | Grounding Cord with Ring Terminal | 0000000 | 000000 |
| 96" | 7" | 1 3/8" | 96" | 3/4" | 120V AC/240V AC | 6 1/2 | Grounding Cord with Ring Terminal | 0000000 | 00000000 |
Oil- and Coolant-Collecting Air Cleaners
Often used in machine shops, these cleaners remove oil and coolant mist from the air. Air passes through a spinning drum.
Cleaners that cannot be sold to California are restricted due to energy efficiency requirements.
For technical drawings and 3-D models, click on a part number.
Cleaners | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Replacement Filters | |||||||||||||||
| Airflow, cfm | Volume | Power, hp | Voltage | Current | For Inlet Duct Dia. | Ht. | Wd. | Dp. | Mounting Fasteners Included | Mounting Hole Dia. | Includes | Cannot Be Sold To | Each | Each | ||
| 165 | 56 dB @ 15 ft. | 1/2 | 208V AC 240V AC 460V AC | 1.1A 2.2A 2.4A | 4" | 19" | 15" | 15" | No | 9/16" | Disposable Filter (Captures 98% of mist particles down to 1 micron) | __ | 000000 | 000000000 | 0000000 | 000000 |
| 380 | 58 dB @ 15 ft. | 1 | 208V AC 240V AC 460V AC | 2.1A 4.2A 4.6A | 4" | 21" | 17" | 22" | No | 9/16" | Disposable Filter (Captures 98% of mist particles down to 1 micron) | CA | 000000 | 00000000 | 0000000 | 00000 |
| 1,000 | 60 dB @ 15 ft. | 3 | 208V AC 240V AC 460V AC | 10.6A 4.8A 9.6A | 6" | 23" | 21" | 22" | No | 9/16" | Disposable Filter (Captures 98% of mist particles down to 1 micron) | CA | 000000 | 00000000 | 0000000 | 00000 |