Clamping Surface Type Clamping Surface Type |
---|
![]() | ![]() |
Fixed | Swivel Pad |
![]() | |
Pivoting Jaw |
Holding Capacity Holding Capacity |
---|
|
Handle Finish Handle Finish |
---|
|
Clamping Surface Finish Clamping Surface Finish |
---|
|
The clamping arm slides freely along the bar for quick, one-handed positioning. Tighten the screw onto a workpiece and the arm locks in place. These clamps are also known as F- or L-clamps.
Opening | ||||||
---|---|---|---|---|---|---|
Max. | Min. | Reach | Holding Capacity, lbs. | Body Material | Each | |
4" | 0" | 2 1/4" | 400 | Zinc-Plated Steel | 0000000 | 000000 |
6" | 0" | 4 3/4" | 1,330 | Zinc-Plated Steel | 0000000 | 00000 |
8" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 00000 |
9" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 00000000 | 00000 |
10" | 0" | 4 3/4" | 1,000 | Zinc-Plated Steel | 00000000 | 00000 |
12" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 00000 |
12" | 0" | 8" | 1,700 | Zinc-Plated Steel | 0000000 | 000000 |
16" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 000000 |
18" | 0" | 4 3/4" | 1,980 | Zinc-Plated Steel | 00000000 | 000000 |
20" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 000000 |
24" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 000000 |
24" | 0" | 8" | 1,700 | Zinc-Plated Steel | 0000000 | 000000 |
36" | 0" | 5 1/2" | 2,800 | Zinc-Plated Steel | 0000000 | 000000 |
48" | 0" | 5 1/2" | 2,800 | Zinc-Plated Steel | 0000000 | 000000 |
60" | 0" | 5 1/2" | 2,800 | Zinc-Plated Steel | 0000000 | 000000 |
These clamps have twice the capacity of standard fast-action bar clamps. The clamping arm slides freely along the bar for quick, one-handed positioning. Tighten the screw onto a workpiece and the arm locks in place. These are also known as F- or L-clamps.
Opening | |||||||
---|---|---|---|---|---|---|---|
Max. | Min. | Reach | Holding Capacity, lbs. | Body Material | Swivel Range of Motion | Each | |
12" | 0" | 7" | 4,880 | Zinc-Plated Steel | 20° | 0000000 | 0000000 |
12" | 0" | 7" | 4,880 | Zinc-Plated Steel | 35° | 0000000 | 000000 |
18" | 0" | 7" | 4,880 | Zinc-Plated Steel | 20° | 0000000 | 000000 |
18" | 0" | 7" | 4,880 | Zinc-Plated Steel | 35° | 0000000 | 000000 |
36" | 0" | 7" | 4,880 | Zinc-Plated Steel | 20° | 0000000 | 000000 |
36" | 0" | 7" | 4,880 | Zinc-Plated Steel | 35° | 0000000 | 000000 |
For the most demanding jobs, these clamps have almost five times the capacity of standard fast-action bar clamps. The clamping arm slides freely along the bar for quick, one-handed positioning. Tighten the screw onto a workpiece and the arm locks in place. These are also known as F- or L-clamps.
Pull the handle to lock the jaw in place and prevent loosening caused by vibration. The clamping arm slides freely along the bar for quick, one-handed positioning. These clamps are also known as F- or L-clamps.
Each arm slides freely for quick, one-handed positioning. They lock when the screws are tightened onto a workpiece. Reverse the arms to use these clamps as spreaders.
Press the quick-release button and slide the screw into position to make adjustments in less time. Turn the screw for final tightening.