These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Unlike standard silicone sealants, this silicone sealant can be painted.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

This sealant includes a material certificate with traceable lot number, test report, and product shelf life.

A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Thinner than non-sagging sealants, this sealant flows easily into cracks and has a smooth finish.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Also known as neutral cure, this sealant won't discolor copper, brass, plastic, and concrete.

Mix a small amount of water-based paint with this caulk to match the color of your surface.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

The strongest submersible sealants we offer, these combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Apply this thread sealant stick without a mess.

Apply these thread sealant sticks without a mess.

Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start.

Formulated to flow into small spaces, use these sealants between fine threads.

Formulated for high lubricity, these sealants allow easy assembly of finely threaded hydraulic and compressed air system components. They're also free of fillers that could contaminate system media.

Remaining pliable over time, these high-temperature sealants protect against leaks caused by vibration and pressure—they naturally fill voids before leaks can develop.

Completely free of oil and chemically inert, these sealants are safe to use with wet and dry oxygen systems.

Minimize mess and waste—when you release the handle on these guns, the rod retracts a bit to stop flow automatically.

Let compressed air do the work for you when dispensing sealants from cartridges.

These flexible extensions add length and bend 180° to get into hard-to-reach areas.

Immerse the nozzle in the sealant and pull back the rod to fill.

Dispense sealants packaged in sausage packs.

Achieve the perfect bead every time.

Also known as glazing compounds, use these sealants to install glass in aluminum, steel, and wood framing.

Make seals that support glass under heavy loads in equipment and buildings.

Seal glass windows in metal and wood fire-rated doors.

The textured finish matches concrete surfaces.

Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Designed for use on ovens and kilns, these sealants form a durable, rock-hard seal after firing.

Apply remover to debond sealant from surfaces and clean it off of work areas and tools.

Seal metal-to-metal joints in ductwork.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Seal roof openings around pipes, vents, and chimneys.

Withstand demanding, high-vibration applications such as motor and pump housings with these threadlockers.

Keep threaded fasteners from loosening at temperatures up to 450° F.

Specially formulated for plastics, these threadlockers secure nylon, PTFE, and other plastic threaded fasteners.

Use these threadlockers in areas with limited ventilation.

Secure threaded fasteners at temperature extremes—from -300° F to 2100° F.

This thick paste withstands temperatures up to 650 °F.

Apply these threadlockers on fasteners that are already installed—their thin consistency allows them to flow into small gaps.

These threadlockers withstand temperatures up to 450° F.

These threadlockers hold securely but stay flexible, so fasteners can be adjusted, removed, or reused.

When concrete is saturated or submerged in water, use these adhesives to form strong bonds.

These adhesives maintain their strength at temperatures up to 250° F.

Bond glass and stone to drywall, treated lumber, and subfloors.

Even on oily surfaces, these retaining compounds keep their hold.

Fill gaps up to 0.02" to secure worn unthreaded cylindrical metal parts such as shafts, bearings, and press-fit assemblies.