These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics.

Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.

Mix a small amount of water-based paint with this caulk to match the color of your surface.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

The strongest submersible sealants we offer, these combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Apply this thread sealant stick without a mess.

Apply these thread sealant sticks without a mess.

Much thicker than sealants for fine threads, these sealants bridge the gaps between coarse threads.

Apply this thread sealant stick without a mess.

Formulated for high lubricity, these sealants allow easy assembly of finely threaded hydraulic and compressed air system components. They're also free of fillers that could contaminate system media.

For use in refrigeration systems and applications exposed to strong chemicals, these sealants have excellent solvent resistance.

Minimize mess and waste—when you release the handle on these guns, the rod retracts a bit to stop flow automatically.

Let compressed air do the work for you when dispensing sealants from cartridges.

Power without a cord means you can take these sealant-dispensing guns wherever you need them.

Immerse the nozzle in the sealant and pull back the rod to fill.

Achieve the perfect bead every time.

Also known as glazing compounds, use these sealants to install glass in aluminum, steel, and wood framing.

Make seals that support glass under heavy loads in equipment and buildings.

Seal glass windows in metal and wood fire-rated doors.

Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.

The textured finish matches concrete surfaces.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Designed for use on ovens and kilns, these sealants form a durable, rock-hard seal after firing.

Seal metal-to-metal joints in ductwork.

Apply remover to debond sealant from surfaces and clean it off of work areas and tools.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Withstand demanding, high-vibration applications such as motor and pump housings with these threadlockers.

Use these threadlockers on fasteners that require occasional fine-tuning, such as set screws.

These threadlockers develop usable strength within one hour. Because they harden quickly on most metals, they don't require a primer.

These low-friction threadlockers harden slowly, allowing ample time to smoothly adjust multiple large bolts for even clamping.

Paste threadlockers are easy to apply and won't drip, even from overhead fasteners.

This gel clings to fasteners to prevent drips.

These threadlockers hold securely but stay flexible, so fasteners can be adjusted, removed, or reused.

These threadlockers withstand temperatures up to 450° F.

Fill gaps up to 0.01" to secure unthreaded cylindrical metal parts such as shafts, bearings, and press-fit assemblies.

Fill gaps up to 0.02" to secure worn unthreaded cylindrical metal parts such as shafts, bearings, and press-fit assemblies.